Ameritec AM5XT 30-0033 XT Communications Test Set
Produttore:
Modello:
AM5XT 30-0033 XT
Data:
1989
Categoria:
Gruppo:
Descrizione:
Signaling Adaptor

Informazioni

The AM5XT 30-0033 and 30-0033XT Signaling Adaptors are packaged within the cover (lid) of the AM5XT Voice/Data Transmission Test Set. These units provide for Loop Start, Ground Start, DID and Types I, II and III E&M signaling. Each unit is powered externally by connection to a 115VAC source and contains a selectable 24 or 48 volt battery supply for emulating CO operations.

mostra più dettagli

Manuale d'uso
Tipo di manuale:
Manuale d'uso
Pagine:
31
Dimensione:
1.63 Mbytes (1708600 Bytes)
Lingua:
english
Revisione:
C
ID del manuale:
18-0023
Data:
1997 08 01
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2017 10 14
MD5:
154c82526c2432041d9fb55f218d3c20
Scaricamenti:
950

Informazioni

The purpose of this document is to provide general information and detailed operating instructions for the Ameritec AM5XT 30-0033 and the 30-0033XT Signaling Adaptors. Included are step-by-step procedures for setting up and operating the unit on E&M, Ground Start, Loop Start and DID circuits. The document is intended to be used with the Model AM5XT and AM5eXT Instruction Manual, Part Number 18-0022 and the Model AM5XT and AM5eXT Test Operating Procedures document, Part Number 18-0119. The Test Operating Procedures document is included in the Instruction Manual and can also be purchased separately. Refer to the Test Operating Procedures document for detailed instructions for performing transmission impairment tests once the connection has been established with the 30-0033 or 30-0033XT Adaptor. This document contains five sections. The first, General Information, provides an overview of the AM5XT 30-0033 and 30-0033XT Adaptors, the front panel components and technical specifications for each adaptor. All readers should review this section before using either version of the adaptor. The second through fifth sections provide step-by-step procedures for setting up each unit and initiating or terminating calls on E&M, Ground Start, Loop Start and DID circuits respectively.

mostra più dettagli