Attrezzatura informazioni:

Quadtech Inc. Guardian 5000 Analyzer
Produttore:
Quadtech Inc.
Modello: Guardian 5000
Data: 1999
Categoria: Strumenti di misura
Gruppo: Analyzer
Descrizione: Safety Analyzer
Informazioni:
                                    The Guardian 5000 Safety Analyzer combines four critical
safety tests into a single
instrument, these being AC hipot, DC hipot, insulation
resistance measurements and
ground continuity test. The hipot test can be programmed
over a voltage range of 0.1 to
5KV AC and 0.5 to 6KV DC with a min/max leakage current
detection range of 300μA to
40mA AC and 20mA DC. Insulation resistance measurements are
possible to 10GΩ at
programmable DC test voltages between 100 and 1000V. A
ground continuity test to 30A
AC is also possible. The instrument comes standard with
internal storage of up to 50 memory
groups and an IEEE-488.2 interface for remote control
operation and communication with
other instrumentation.

Questi manuali sono disponibili per l'attrezzatura di cui sopra:

Tipo manuale: Manuale d'uso QuadTech-8628-Manual-Page-1-Picture
Pagine: 62
Dimensioni: 305.94 Kbytes (313280 Bytes)
Lingua: Inglese
Revisione:
Manual-ID/Number: 150206/B3
Data: 01 novembre 1999
Qualità: Documento elettronico, senza ricerca, molto ben leggibile.
Data di caricamento:
MD5: d929709f13aa57c9496813ca62735ed6
Download: 45 dal 29 gennaio 2017
Informazioni:
Warranty
...........................................................................................................v
Specifications
...........................................................................................................vii
Introduction - Section 1
1.1 Unpacking and Inspection
.............................................................................1-1
1.1 Product
Overview..........................................................................................1-1
1.3 Front Panel
Description.................................................................................1-2
1.4 Rear Panel Description
..................................................................................1-6
1.5 Accessories Included
.....................................................................................1-7
1.6 Accessories/Options
Available......................................................................1-7
1.7 Power
Requirements......................................................................................1-8
Operation - Section 2
2.1 Startup
...........................................................................................................2-1
2.2 Instrument Zeroing/Offset
.............................................................................2-1
2.3 Connection to Device Under Test
.................................................................2-3
2.4 Measurement Procedure
................................................................................2-6
2.5 Programming Test Modes
.............................................................................2-8
2.6 Programming Hipot Test
...............................................................................2-10
2.7 Programming Insulation Resistance (IR) Test
..............................................2-12
2.8 Programming Ground Continuity
Test..........................................................2-14
2.9 Initial Parameter
Setting................................................................................2-16
2.10 Front Panel Lockout
......................................................................................2-18
2.11 Software Version
Display..............................................................................2-18
2.12 Clear Setup
Memory......................................................................................2-18
Input/Output Interfaces - Section 3
3.1
Remote...........................................................................................................3-1
3.2 IEEE-488
Interface........................................................................................3-3
3.2.1 Description
........................................................................................3-3
3.2.2 Interface
Commands..........................................................................3-4
3.2.2.1 Listener Functions
..............................................................3-5
3.3.2.2 Talker
Functions....................................................................3-9
3.2.3 Sample QuickBASIC
Program..........................................................3-11
3.3 Scanner Interface
...........................................................................................3-14
3.3.1 Scanner Accessories
..........................................................................3-14
3.3.2 Scanner Card Installation
..................................................................3-14
3.3.3 Scanner Connections
.........................................................................3-15
3.3.4 Scanner Programming
.......................................................................3-17
3.4 G16 International Power
Strip.......................................................................3-19
4.1 General
..........................................................................................................4-1
4.2 Instrument
Return..........................................................................................4-1
4.3 Calibration
.....................................................................................................4-1
4.3.1 Calibration
Procedure........................................................................4-2
4.3.2 AC Voltage
Calibration.....................................................................4-3
4.3.3 DC Voltage
Calibration.....................................................................4-4
4.3.4 IR Voltage Calibration
......................................................................4-4
4.3.5 AC Current Calibration
.....................................................................4-5
4.3.6 DC Current Calibration
.....................................................................4-6
4.3.7 GC
Calibration...................................................................................4-7
4.3.8 Finalize Calibration
...........................................................................4-8
QuadTech-8628-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics