Telecommunications Techniques Corporation 41800 Interfaccia
Produttore:
Nessuna immagine disponibile!
Forse puoi caricare una foto per la
Telecommunications Techniques Corporation 41800?
Se avete altri manuali per la
Telecommunications Techniques Corporation 41800 potete caricare i file qui .
Modello:
41800
Data:
1997
Categoria:
Gruppo:
Descrizione:
CCITT 2.048M/NX64K DATA INTERFACE
Informazioni
The 2.048M/Nx64K Data Interface allows the FIREBERD
mainframe to test communications equipment and systems that
comply with CCITT G.703, G.704, G.732, 2048 kbps, and Nx64
kbps signal recommendations for framed or unframed data.
The 2.048M/Nx64K Data Interface allows any selection of Nx64
kbps timeslots within the 2.048 Mbps signal to be accessed
for bit error analysis. This allows real-time analysis of
any number of timeslots (up to 30 o, 31, depending on the
selected multiframing).
1.2 INTERFACE FEATURES __
The 2.048M/Nx64K Data Interface has the following features:
• Unframed or framed 2048 kbps signal analysis with TS-16
CAS (Channel Associated Signalling) and/or CRC4 multiframing.
• Nx64 kbps or Nx56 kbps analysis with unrestricted timeslot
selection.
• Nx64 insert mode.
• Round- trip del ay1 measurement.
• Frequency measurement.
• Timing Slips and Wander1 measurements.
• Jitter2 measurements.
• Positive and negative base-to-peak digital signal level
measurements, in dB.
• In-service monitoring.
• G.821 performance analysis.
• Four selectable transmitter timing sources.
• Programmable timeslot and ABCD IDLE codes.
• Selectable MSB or LSB stuffing in Nx56 kbps analysis mode.
• Selectable voice coding: A-Law or ji-Law.
• Single or consecutive FAS Word error insertion.
• Logic and/or code error insertion (single or variable rate).
• AMI or HDB3 coding.
• Test loopback.
• Voice mode through a telephone handset.
• ABCD signalling access with CAS multiframing.
• Selectable input termination, including MONITOR mode.
• Output line build-out level selection.
• Display Frame Alignment Signal, Not Frame Alignment
Signal, Multiframe Alignment Signal, and Receive Byte of
selected timeslot.
• Transmit alarms.
• Programmable TSO national bits, international bits, and
TS- 16 spare bits.
• Broadcast mode.
• 2Mbps alarm detection.
Tipo di manuale:
Manuale d'uso
Pagine:
62
Dimensione:
2.54 Mbytes (2660198 Bytes)
Lingua:
english
Revisione:
D
ID del manuale:
50-12028-01
Data:
1997 08 01
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2017 01 08
MD5:
e0d70d9ef839c3b78da66856902d9b27
Scaricamenti:
633
Informazioni
1 GENERAL INFORMATION
... 1-1
1.1
Introduction ... 1-1
1.2 Interface
Features ...
1-1
1.3 Interface Compatibility
... 1-2
1.4 Options And
Accessories ... 1-3
2 INTERFACE DESCRIPTION
... 2-1
2.1
Introduction ... 2-1
2.2 Physical
Description ... 2-1
2.2.1
HANDSET ... 2-2
2.2.2 2.048M REF
IN ... 2-2
2.2.3 120 W BAL RCVR
... 2-2
2.2.4 120 W BAL
XMTR ... 2-2
2.2.5 XMTR 75 W
UNBAL ... 2-3
2.2.6 RCVR 75 W UNBAL
... 2-3
2.3 Functional
Description ...
2-3
2.3.1 FULL
2M ... 2-3
2.3.2
Nx64k1 ... 2-3
2.3.3 N64INS1
... 2-3
2.3.4 VOICE 1
... 2-4
2.3.5 BRDCST1
... 2-4
2.3.6 TLB
... 2-4
2.4 Self-Loop Operation
... 2-4
3 INSTALLATION AND OPERATION
... 3-1
3.1
Introduction ... 3-1
3.2 Interface Installation
... 3-1
3.3 FIREBERD Mainframe Configuration
... 3-2
3.4 2.048M/NX64K Interface Menu In A FIREBERD 6000
... ' ... 3-2
3.4.1
CONFIG ... 3-4
3.4.2 MODE
...
3-6
3.4.3
ERRINS ... 3-9
3.4.4
IDLE ... 3-9
3.4.5
RCVBYT ... 3-10
3.4.6 ALARMS
...
3-10
3.4.7
FRWORD ... 3-11
3.5 2.048M/NX64K Interface Menu in a FIREBERD 4000
... 3-11
3.5.1
FRAMING ... 3-12
3.5.2 CRC4/TS16
... 3-12
3.5.3 INPUT
... 3-13
3.5.4 LINE BUILD OUT
... 3-13
3.5.5
INTFGENCLK ... 3-13
3.5.6 OPERATION MODE
... 3-16
3.5.7
ABCD ... 3-18
3.5.8 ERRINS
... 3-18
3.5.9 RCV BYTE TS
... 3-19
3.5.10 ABCD IDLE
CODE ... 3-19
3.5.11 TS IDLE
CODE ... 3-19
3.5.12 TX ALARMS
... 3-20
3.5.13 NFAS WORD
... 3-20
3.5.14 MF A S
WORD ... 3-20
3.6 Interface Pattern
Selection ... 3-21
3.7 Interface Error
Messages ... 3-21
3.8 Interface Indicators
... 3-22
3.9 Interface Analysis
Results ... 3-23
3.10 Analysis Results
Definitions ... 3-26
3.11 FIREBERD Printer
Operation ... 3-30
3.12 2.048M/NX64K Interface Remote Control Commands
... 3-32
3.13 Testing With The 2.048M/NX64K
Interface ... 3-34
3.13.1 Out-of-Service
Testing ... 3-35
3.13.2 In-Service Live Data
Monitoring ... 3-36
4 INTERFACE SPECIFICATIONS
... 4-1
4.1
Introduction ... 4-1
5 MAINTENANCE AND SERVICE
... 5-1
5.1
Introduction ... 5-1
5.2
Maintenance ... 5-1
5.2.1 In Case of Difficulty
... 5-1
5.3
Service ... 5-1
5.3.1 Warranty
Policy ... 5-1
5.3.2 In-Warranty
Service ... 5-2
5.3.3 Out-of-Warranty
Service ... 5-2
5.3.4 Equipment Return Instructions
... 5-2
INDEX-1