General Radio Company 1362 Oscillator
Produttore:
Modello:
1362
Data:
1967
Categoria:
Gruppo:
Descrizione:
UHF Oscillator

Informazioni

The 1362 UHF Oscillator (Figure 1-1) is a general-purpose Oscillator for the radio-frequency laboratory. Covering the calibrated range from 220 to 920 MHz, this Oscillator provides adequate power to drive bridges, slotted lines, impedance comparators, and other measuring equipment. The output is brought through an attenuator, calibrated in relative power levels, making the Oscillator suitable for the testing of receivers. Direct sine-wave, square-wave, or pulse amplitude modulation is possible. Amplitude modulation free from incidental fm can be obtained with an external diode modulator. Connected to a mixer, the Oscillator can be used as the local Oscillator in a heterodyne receiver to convert the GR 1236 I-F Amplifier, or a low-frequency communications receiver, into a detector for uhf signals. Square-wave and pulse amplitude modulation can be obtained with the GR Type 1264 Modulating Power supply (Figure 1-2), or leveled output can be obtained with the GR Type 1263 Amplitude-Regulating Power supply.

mostra più dettagli

Servizio e manuale utente
Tipo di manuale:
Servizio e manuale utente
Pagine:
28
Dimensione:
15.42 Mbytes (16170537 Bytes)
Lingua:
english
Revisione:
ID del manuale:
1362-0100 B
Data:
1967 01 01
Qualità:
Documento scansionato, tutto leggibile.
Data caricamento:
2016 12 29
MD5:
74caa15bd4cfcac258bd356f61c30d4b
Scaricamenti:
671

Informazioni

SPECIFICATIONS TABLE OF CONTENTS INTRODUCTION - SECTION 1 INSTALLATION - SECTION 2 OPERATING PROCEDURE - SECTION 3 APPLICATIONS - SECTION 4 PRINCIPLES OF OPERATION - SECTION 5 SERVICE AND MAINTENANCE - SECTION 6

mostra più dettagli