Spirent Communications Inc. TAS Series II Altro
Produttore:
Modello:
TAS Series II
Data:
2001
Categoria:
Gruppo:
Descrizione:
Telephone Network Emulator

Informazioni

The TAS Series II is an advanced new Telephone Network Emulator from Spirent Communications. The TAS Series II provides new high-end solutions for development, testing, and evaluation of modems, Fax machines, voice/data terminals, transmission test sets, and other voice bandwidth data communications devices. The TAS Series II offers complete bi-directional impairments simulation (Figure 1-1), The TAS Series II provides greatly enhanced echo simulation capabilities and the ability to emulate virtually all worldwide central office signaling formats. Because the TAS Series II is compatible with testing standards from EIA, CCITT, ETSI, Bell Operating Companies, AT&T, Nippon Telephone and Telegraph, and many other companies and industry organizations, test results have immediate credibility. In addition, the TAS Series II is software-compatible with the older TAS 1010 Channel Simulator, thereby protecting your prior investment in test procedures and software. TAS Series II works with the TAS Gemini Dual Terminal Emulator and TASKIT software to provide completely automatic modem testing. TAS Series II test results track with those obtained on the popular TAS 1010 and TAS 100 Series

mostra più dettagli

Manuale d'uso
Tipo di manuale:
Manuale d'uso
Pagine:
338
Dimensione:
3.05 Mbytes (3200107 Bytes)
Lingua:
english
Revisione:
2.50
ID del manuale:
2700-2003
Data:
Qualità:
Documento elettronico, senza ricerca, molto ben leggibile.
Data caricamento:
2015 12 28
MD5:
95a0955d2a3428832146a225d1ba76ec
Scaricamenti:
586

Informazioni

This manual applies to TAS Series II 2.7 and higher The TAS Series II Telephone Network Emulators Operations Manual contains information required to effectively use the TAS Series II Telephone Network Emulator. It is recommended that you familiarize yourself with this manual before attempting to use the TAS Series II unit. This manual is presented as follows: Section 1 Introduction - provides a brief description of the Series II including the features and applications, overviews of the front and rear panel, and an installation procedure with a contact telephone number in case you encounter difficulty. Section 2 Features Description - discusses the functions of the various displays, controls, jacks, and ports located on the front and rear panels. All available impairments and allowable network configurations are also fully presented. The optional PCM/ADPCM modules are also presented in this section. Section 3 Programmer’s Guide - provides the necessary information to control the TAS Series II via RS-232C or GPIB (IEEE-488) interfaces. This section is essential reading for those who will be integrating a TAS Series II into a larger test system. Section 4 Error Codes - lists the TAS Series II error codes that may be encountered during power-up or operation. Section 5 Technical Specifications - contains detailed system specifications, connector pinouts, and frequency response plots.

mostra più dettagli