KW Communications KW 204 Trasmettitore
Produttore:
Nessuna immagine disponibile!
Forse puoi caricare una foto per la
KW Communications KW 204?
Se avete altri manuali per la
KW Communications KW 204 potete caricare i file qui .
Modello:
KW 204
Data:
0
Categoria:
Gruppo:
Descrizione:
Single Sideband Transmitter
Informazioni
The K.W. 204 Transmitter is engineered for optimum
performance on SINGLE SIDEBAND SUPPRESSED CARRIER upper or
lower sideband, SINGLE SIDEBAND WITH CARRIER upper or lower
sideband and C.W. A TONE Oscillator is provided for sidetone
generation during C.W. operation. It operates on all Amateur
Bands between
1.8 MHz and 30 MHz. The power input is 180 watts PEP on SSB,
75 watts on AM and 150 watts on CW. A Pi output stage
provides a variable output impedance.
The Power Supply is built-in and operates from a supply
voltage of 117v or 234v - 5y> AC 45-65 Hz. An optional
plug-in VOX Unit is available.
Tipo di manuale:
Servizio e manuale utente
Pagine:
29
Dimensione:
1.25 Mbytes (1314417 Bytes)
Lingua:
english
Revisione:
Issue 2
ID del manuale:
Data:
Qualità:
Documento scansionato, tutto leggibile.
Data caricamento:
2014 02 19
MD5:
70a95536026d7287f8ca9a5bc3a613a6
Scaricamenti:
706
Informazioni
SECTION 1 “"
GENERAL DESCRIPTION AND SPECIFICATION
1.1 Introduction 1-1
1.2 Specification 1 - 1, 2
1.3 Tube and Semi-Conductor Complement 1-2
SECTION 2
CIRCUIT DESCRIPTION
2.1 Transmitter Circuits 2 - 1, 2
2.2 Oscillators 2-2
2.3 Control Circuits 2-4
2.4 Power Supply 2-4
SECTION 3 INSTALLATION
3.1 Unpacking 3-1
3.2 Station Installation 3-1
3.3 Installation with KW 1000 Linear Amp. 3-1
3.4 Optional Vox Unit Installation 3-1
3.5 Antenna 3-1
3.6 Initial Checks 3 - 1 & 4 - 1
SECTION 4 OPERATION
4.1 Setting Up 4-1
4.2 Netting 4-1
4.3 Tune Procedure 4-1,2
4.4 Setting of PA Load Control 4-2
4.5 S.S.B. Operation 4-2
4.6 A.M. Operation 4-2
4.7 C.W. Operation 4-2
4.8 160M S.S.B. Operation 4-3
4.9 VOX Operation 4 - 3, 4