|Sony BKDF-712 Miscelatore|
|Categoria:||Musica attrezzature professionali|
|Descrizione:||3D VIDEO MAPPING EFFECTS BOARD|
The Sony DFS-700/700P DME Switcher is a Digital Multi Effects system, offering high-performance effects at high image quality. The system consists of a processor unit and control panel. Support for fully digital component systems with SDI inputs and outputs This system provides SDI interfaces as standard equipment. This allows it to be incorporated in fully digital linear editing systems using DVCAM-series, Betacam SX-series, and other digital VCRs. Advanced special effects This system is equipped with advanced special effects, including trail, lighting effects, ripple, swirl, and explosion. Installing the optional BKDF-711 board adds a second DME channel, and the optional BKDF-712 board enables 3D mapping effects to be used. For details of option boards, see page 1-3. Support for wide range of input/output signal formats • There are eight inputs as standard (VIDEO INPUT 1 to 8). VIDEO INPUT 1 to 4: SDI (serial digital interface) signals VIDEO INPUT 5 to 8: analog component signals. VIDEO INPUT 8 can also be used as an analog RGB signal input. Installing the optional BKDF-701 board allows all eight inputs to be used as either SDI or analog component inputs. Installing the optional BKDF-702/702P board allows four inputs to be used as either Y/C (S-video) or analog composite inputs. For details of option boards, see page 1-3. • The standard outputs are two each of SDI, analog component, analog composite, and Y/C, for a total of eight outputs.
Questi manuali sono disponibili per l'attrezzatura di cui sopra:
|Sony -- BKDF-712 -- Manuale di servizio|
|Tipo manuale:||Manuale di servizio|
|Dimensioni:||4.89 Mbytes (5127049 Bytes)|
|Qualità:||Documento elettronico, senza ricerca, molto ben leggibile.|
|Data di caricamento:||02 agosto 2015|
|Download:||801 dal 02 agosto 2015|
This manual is the service manual Vol.1 of the DME Switcher DFS-700/700P and their optional boards. The service manuals (Vol.1 and Vol.2) are intended for use by trained system and service engineers, and describes the information on installing, maintenance, and detailed service. This manual (Vol.1) describes the operating instructions, service overviews, diagnosis, and electrical alignment. This manual is organized by following sections. Section 1 Operating Instructions This section describes the Operation Manual supplied with the DFS-700/700P. Section 2 Service Overview This section explains the information that is required for installing (the operating conditions, power supply and power cords, installaion of the optional board, rack mounting, adaptive connectors), outline of the board circuit, replacement of the parts, switch setting on the board, error indication, and tools and adjustment equipment. Section 3 Self-diagnosis This section explains the activation (termination) of the check mode in this unit, the basic operation, and the check method. Section 4 Electrical Alignment This section explains the adjustment of the OPM-39, IPM-69, VIF-19, and VIF-20 boards.
|Avviare il Download gratuito|
No comments yet. Be the first!