Hewlett Packard 1631D Analyseur logique
Fabricant:
Image 1 de 3
Image 2 de 3
Image 3 de 3
Si vous avez d'autres photos ou manuels pour les
Hewlett Packard 1631D vous pouvez télécharger les fichiers ici .
Modèle:
1631D
Date:
1986
Catégorie:
Groupe:
Description:
Information
The Hewlett-Packard 1630 and 1631 Logic Analyzers are
Interactive state and timing analyzers for use in the design
and troubleshooting of digital systems. Many functions of
the systems are the same. The HP 1630A and 1631A have 27
state channels with three clocks and 8 timing channels. The
HP 1630D and 1631D have an additional 8 timing channels. The
HP 1630G has an additional 30 state channels. The HP 1631A
and 1631D have two analog signal channels and an analog
trigger channel. All models feature a menu system for
defining measurements which simplifies setup time by
reducing the number and complexity of front panel keys.
Following is a listing of the key features of the HP 163X
systems.
Type manuel:
manuel de réparation
Pages:
507
Taille:
26.56 Mbytes (27851423 Bytes)
Langue:
english
Révision:
Manuel-ID:
01630-90916
Date:
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de transfert:
2013 12 01
MD5:
834a98d43bd9e8e81cb1933c627a1e35
Téléchargements:
3570
Information
This manual applies directly to instruments with serial
numbers prefixed:
1630A;2812A 1630D;2812A 1630G;2812A 1631 A; 2811A 1631D; 2811A
With changes described within, this manual also applies to
instruments with serial prefixes:
1630A; 2242A through 2715A 1630D; 2234A through 2720A 1630G;
2415A through 2602A 1631 A; 2451A through 2714A 1631D; 2446A
through 2713A
SECTION I, GENERAL INFORMATION. This section contains a
description of this manual and the HP 163X logic Analyzer
family. This section also gives specifications and
recommended test equipment for the logic analyzers.
SECTION II, INSTALLATION. Section II explains how to prepare
the Logic Analyzers for use.
SECTION III, OPERATION. Operation of the HP 1630A.D/G and HP
1631 A/D is outside the scope of this service manual.
Section III does give a brief description of front panel
controls and information about configuration of the logic
analyzers for IHP-IB and HP-IL operation. For complete
operating instructions see the Operating Manual.
SECTION IV, CONFIDENCE TESTS. This section concerns the
execution of software-based function verification Self Test
(ST) tests, which includes the interpretation of status
codes to verify correct operation.
SECTION V, ADJUSTMENTS. The logic analyzers require several
adjustments that can be done with an Oscilloscope,
voltmeter, programmable signal source and controller; these
adjustments are covered this section.
SECTION VI, REPLACEABLE PARTS. This section contains
ordering information and a parts list for all models of the
family.
SECTION VII, INSTRUMENT CHANGES. This section has
information which describes changes to the instruments and
how to find proper documentation for the instrument being
serviced.
SECTION VIII, SERVICE. The Service section is divided into
eight subsections. The first subsection covers the overall
system. This includes system theory, and which service group
to reference with a failure. The service groups focus on
individual subsystems. Information in these groups includes
block and component level theory, mnemonics, and schematics
relating to that subsystem.