Hewlett Packard 11729C Test Set
Fabricant:
Modèle:
11729C
Date:
1985
Catégorie:
Groupe:
Description:
Carrier Noise Test Set

Information

The Hewlett-Packard Model 11729C Carrier Noise Test Set is an integral part of a phase noise measurement system. The Carrier Noise Test Set can perform the following operations: • Up converts an external (or internal) reference signal. • Down converts the signal under test to an intermediate frequency (IF). • Phase demodulates the phase noise of the test signal using the Phase Detector Method. —When the Phase Detector Method is used the signal under test is phase locked to a reference signal. —The signal under test is then phase detected against the same reference signal. • Frequency demodulates the phase noise of the test signal using the Frequency Discriminator Method

plus

Service et Manuel de l'utilisateur
Type manuel:
Service et Manuel de l'utilisateur
Pages:
163
Taille:
27.66 Mbytes (29006589 Bytes)
Langue:
english
Révision:
Manuel-ID:
11729-90017
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2013 11 27
MD5:
9c21a2bedd5dcd1ed8da41e3df3aa9fd
Téléchargements:
1375

Information

This manual applies directly to instruments with serial numbers prefixed 2509A. For additional important information about serial numbers, see INSTRUMENTS COVERED BY THIS MANUAL in Section I. Section I, General Information Section II, Installation Section III, Operation Section IV, Performance Tests Section V, Adjustments Section VI, Replaceable Parts Section VII, Manual Changes Section VIII, Service

plus

Service et Manuel de l'utilisateur
Type manuel:
Service et Manuel de l'utilisateur
Pages:
163
Taille:
28.19 Mbytes (29563514 Bytes)
Langue:
english
Révision:
Manuel-ID:
11729-90018
Date:
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2013 11 30
MD5:
e9bd30e5d19867c32910795669983dde
Téléchargements:
1368

Information

This manual applies directly to instruments with serial numbers prefixed 2509A. For additional important information about serial numbers, see INSTRUMENTS COVERED BY THIS MANUAL in Section I. Section I, General Information Section II, Installation Section III, Operation Section IV, Performance Tests Section V, Adjustments Section VI, Replaceable Parts Section VII, Manual Changes Section VIII, Service

plus