Informations sur l'appareil:

Whirlpool ADP 4520 WH Lave-vaisselle
Fabricant:
Whirlpool
Modèle: ADP 4520 WH
Date: 2004
Catégorie: Appareils électroniques domestiques
Groupe: Lave-vaisselle
Description: Dishwasher
Information:
                                    Technical data

Dimension of Free standing appliances with flat/
square outer door
Height 85.0 cm
Width 59.7 cm
Depth 59.6 cm
Weight 56 kg

Electronic boards
Service boards see spare part list
Serial boards see on the boards itself
Programmed control board and programing of
version , see „Board Service“ and „DATA“ on rating
plate of inner door:
UCB 704742
Data set 704732
Basic UCB, not programmed
see on the board itself 4619 727 04651

Succession of programs
Programs see program diagram
Succession P1a-P3a-P5c-P6a-P7a

Datas Energy Label
Reference program P5c
Energy Performance A
Cleaning Performance A
Drying Performance B

Alarms
Refill rinse aid
Refill salt

Program information
Start indicator
All programs will be locked after start. Changing
the program or finishing the program will be
possible only after pressing the start button for
longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the
appliance for a while, this will frozen the program
step and later on, the program continuos on the
same position.
Exception: Switching off the appliance or unplug
the appliance during the drying phase, this will lead
directly to the end of the program.

Water Volume at permanent spray system

Water Volume Level
Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Prewash 4.8 l 120 mm
Main wash 4.2 l 118 mm
Intermediate rinse 1 4.2 l 118 mm
Intermediate rinse 2 4.2 l 118 mm
Clear rinse 4.2 l 118 mm
Safety/ overflow 8.5 l 141 mm

Measuring the level
Remove the coarse sieve, put in a measuring
meter into the sump, measure the hight of the
water level.

Detergent max.
Pre-wash 10 cm3
Main-wash 40 cm3
Rinse aid 135 cm3
6 Dosage steps 1 - 6 ml

Water softener
Saltcontainer 2 kg
Resin container 700 cm3
Regeneration dosage 300 cm3

Water pressure
Inlet pressure 0.3 - 10 bar
Spray pump pressure 0.3 bar

Rotations
Spray pump motor 2800 RPM
Drain pump motor 3000 RPM
Spray arm lower 30 - 40 RPM
Spray arm upper 30 - 40 RPM

Ces manuels sont disponibles pour les équipements ci-dessus :

Type de document: manuel de réparation Whirlpool-4652-Manual-Page-1-Picture
Nombre de pages: 16
Taille du fichier: 355.45 Kbytes (363979 Bytes)
langue: Anglais
Révision:
Document ID/Numéro: 4812 718 19693
Date: 11 février 2004
qualité: Électronique de documents, numérisation sans, bien lisible.
Chargé sur:
MD5: 463985d58d66a06d98f547fe5e8a5340
Téléchargements: 528 depuis 03 octobre 2013
Information:
This documentation is only intended for qualified technicians who are aware of the respective
safety regulations.

Technical data 2 - 4
Spare part list 5 - 6
Exploded view 7 - 8
Circuit diagram 9
Program diagram 10
Text/Legend 11 - 16
Whirlpool-4652-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics