Informations sur l'appareil:

Fluke 8020A Multimètre numérique
Fabricant:
Fluke
Modèle: 8020A
Date: 1979
Catégorie: Mètres
Groupe: Multimètre numérique
Description:
Information:
                                    Your John Fluke Model 8020A is a pocket-sized digital
multimeter that is ideally suited for application in the
field, lab, shop or home. Some of the features of your
instrument are:
Φ All VOM functions plus the versatile conductance function
(six in all) are included as standard.
• DC Voltage - 100 μ V to 1000V
• AC Voltage- 100 /tV to 750V
• DC Current - 1 μΑ to 2000 mA
• AC Current - I μΑ to 2000 mA
• Resistance - 0.1Π - 20 ΜΩ
• Conductance - 0.1 nS to 200 nS and .001 mS to 2 mS (S =
siemens = I/O).
• CONDUCTANCE - A new multimeter function that allows fast,
accurate, noise free resistance measurements up to 10,000 ΜΩ.
• 3 I /2 digit liquid crystal display, a high contrast
display that can be read easily from across the room. No
more worries about bent needles, parallax, etc.
• Each range has:
• Full auto-polarity operation.
• Overrange indication.
• Effective protection for overloads up to 1000V dc and
transients up to 6000V peak.
• Dual slope integration measurement technique to insure
noise-free measurements.
• Long term calibration stability - I year. Easy calibration
- few adjustments.
• Lightweight - 369 grams (13 ounces).
• Up to 200 hours of continuous operation can be expected
from a single, inexpensive, 9V, alkaline battery (transistor
radio/calculator type).
Φ Low battery voltage automatically detected and displayed.
• Line operation is possible using a Model A81 Battery
Eliminator (see Section 6, Accessories).
• Protected test leads - finger guards on the probes and
shrouded contacts on the connectors discourage accidental
contact with circuit voltages.
• A full line of accessories that extend the range and scope
of your instrument.

Les guides suivants sont disponibles pour l'équipement ci-dessus:

Fluke -- 8020A -- Supplément manuel de réparation
Nom du fichier: Fluke-138-Manual-Page-1-Picture
Type de document: Supplément manuel de réparation
Nombre de pages: 10
Taille du fichier: 494.75 Kbytes (506626 Bytes)
langue: anglaise
Révision: 3
Document ID/Numéro:
Date: October 1980
qualité: Document scanné, tous les lisible.
Chargé sur:
MD5: 838fd6c4459463f5fbcfb170fae65c4c
ed2kID: 90a49cf97107f0263431ec8a2db5f83a
Téléchargements: 1424 depuis 14 January 2008
Information:
Fluke 8020A  Digital multimeter
Fluke-138-Manual-Page-1-Picture
Télécharger maintenant gratuit


Fluke -- 8020A -- manuel de réparation
Nom du fichier: Fluke-2360-Manual-Page-1-Picture
Type de document: manuel de réparation
Nombre de pages: 79
Taille du fichier: 5.77 Mbytes (6052638 Bytes)
langue: anglaise
Révision: 3/79
Document ID/Numéro: 515825
Date: April 1979
qualité: Document scanné, la lecture en partie mal, en partie illisible.
Chargé sur:
MD5: 37e37f5e7ee47f819d6bfe188e43b110
ed2kID: c8330889ca4f3691e12ba1692d7903ce
Téléchargements: 902 depuis 29 January 2011
Information:
Fluke-2360-Manual-Page-1-Picture
Télécharger maintenant gratuit


Fluke -- 8020A -- Service et Manuel de l'utilisateur
Nom du fichier: Fluke-7613-Manual-Page-1-Picture
Type de document: Service et Manuel de l'utilisateur
Nombre de pages: 89
Taille du fichier: 5.48 Mbytes (5744947 Bytes)
langue: anglaise
Révision:
Document ID/Numéro: 515825
Date: April 1979
qualité: Document scanné, tous les lisible.
Chargé sur:
MD5: efa7220fd3a83ce82d332e4414d5c519
ed2kID: d69e0e30589e71fd4c6f816e7c5abfa6
Téléchargements: 33 depuis 27 January 2016
Information:
1 INTRODUCTION AND SPECIFICATIONS
..............................1-1
l-l. INTRODUCTION l-l
I-3. PREPARING FOR OPERATION ............... I-2
I-4. Unpacking 1-2
I-7. Battery Installation/'Replacement ................. I-2
I-9. PHYSICAL FEATURES 1-4
1-Il. INITIAL CHECK-OUT PROCEDURE
............................ 1-4
I -13. ACCESSORIES 1-6
I -15. SPECIFICATIONS I-6
2 OPERATING INSTRUCTIONS
.....................................................2-1
2-I.
INTRODUCTION..................................................................2-I
2-3. INPUT POWER 2-i
2-4. Battery Life 2-1
2-6. Line Power Operation 2-1
2-8. OPERATING NOTES 2-2
2-10. Input Overload Protection
....................................2-12. Input Connections
to COMMON ................2-3
2-14. Fuse Replacement 2-3
2-16. The Display 2-3
2-20. OPERATION 2-4
2-22. MEASUREMENT TECHNIQUES ..............2-5
2-24. AC Measurement 2-5
2-26. Voltage AC/DC 2-5
2-29. Current AC/DC 2-5
2-33. Resistance 2-9
2-37. Conductance 2-10
2-41. APPLICATIONS 2-10
2-43. Transistor Tester 2-10
2-48. Leakage Tester
.....................................................................2-13
3 THEORY OF OPERATION
.............................................................3-1
3-1.
INTRODUCTION...................................................................3-1
3-3. OVERALL FUNCTIONAL DESCRIPTION ....3-1
3-8. BLOCK DIAGRAM ANALYSIS ..............3-3
3-9. A/D Converter 3-3
3-18. Input Signal Conditioners
................................................3-6
4 MAINTENANCE
................................................................................4-1
4-1.
INTRODUCTION..................................................................4-1
4-3. SERVICE INFORMATION 4-1
4-7. GENERAL INFORMATION ...................4-2
4-8. Access Information 4-2
4-17. Cleaning 4-5
4-19. Battery/Fuse Replacement 4-5
4-21. PERFORMANCE TEST 4-5
4-23. Initial Procedure 4-5
4-25. Display Test
.......................................................................4-6
4-27. Resistance/Conductance Test ...................4-6
4-29. DC Voltage Test .......................4-7
4-31. AC Voltage Test 4-7
4-33. DC Current Test 4-8
4-35. CALIBRATION 4-9
4-38. TROUBLESHOOTING
........................................................4-10
5 LIST OF REPLACEABLE PARTS
................................................5-1
5-1.
INTRODUCTION..................................................................5-1
5-4. HOW TO OBTAIN PARTS
................................................5-2
6 OPTIONS AND ACCESSORIES
..................................................6-1
6-1.
INTRODUCTION..................................................................6-1
6-3. DELUXE CARRYING CASE ..................6-1
6-5. TEMPERATURE PROBE (80T-150) ............6-1
6-6. Introduction 6-1
6-8. Specifications 6-1
6-9. CURRENT TRANSFORMER (801-600) ......... 6-4
6-10. Introduction 6-4
6-12. Specifications 6-4
6-13. HIGH VOLTAGE PROBE (80K-40) .............6-4
6-14. Introduction 6-4
6-16. Specifications 6-4
6-17. HIGH FREQUENCY PROBE (81RF) ...........6-4
6-18. Introduction 6-4
6-20. Specifications 6-5
6-21. HIGH FREQUENCY PROBE (82RF) ...........6-5
6-22. Introduction 6-5
6-25. Specifications 6-5
6-26. BATTERY ELIMINATOR (A81) ...............6-5
6-28. CURRENT SHUNT (80J-10) 6-6
6-29. Introduction 6-6
6-31. Specifications 6-6
7 SCHEMATIC
DIAGRAMS..............................................................7-1
APPENDIX
A.....................................................................................A-1

Fluke-7613-Manual-Page-1-Picture
Télécharger maintenant gratuit


Fluke -- 8020A -- Service et Manuel de l'utilisateur
Nom du fichier: Fluke-7722-Manual-Page-1-Picture
Type de document: Service et Manuel de l'utilisateur
Nombre de pages: 50
Taille du fichier: 2.15 Mbytes (2257243 Bytes)
langue: anglaise
Révision: 2
Document ID/Numéro:
Date: 1978
qualité: Document scanné, la lecture en partie mal, en partie illisible.
Chargé sur:
MD5: bb2807ec85fbdb3be72fd3ee8555e784
ed2kID: 9661d07e995a5bd57a8f395f2fb4ea8f
Téléchargements: 96 depuis 13 February 2016
Information:
1 INTRODUCTION AND
SPECIFICATIONS....................................1-1
1-1. INTRODUCTION
..................................................................1-1
1-3. PREPARING FOR OPERATION
.........................................1-1
1-1.
Unpacking.........................................................................1-1
1-6. Battery
Installation..........................................................1-2
1-8. GETTING
ACQUAINTED....................................................1-2
1-10. Physical
Features..............................................................1-2
1-12. Initial Check-Out
Procedure.............................................1-2
1-14. SPECIFICATIONS
.............................................................1-4
2 OPERATING
INSTRUCTIONS..........................................................2-1
2-10. INTRODUCTION
................................................................2-1
2-3. OPERATING
NOTES............................................................2-1
2-5. Input Power
......................................................................2-1
2-12. Display Readings
..............................................................2-2
2-15. Input Connections to
COMMON.....................................2-2
2-17. Input Overload
Protection.................................................2-2
2-19. Fuse
Replacement..............................................................2-3
2-22. AC
Measurement..............................................................2-3
2-24.
Resistance.........................................................................2-3
2-27. Voltage AC
/DC................................................................2-4
2-30. Current
AC/DC................................................................2-5
2-33.
Conductance.....................................................................2-5
2-37. OPERATION
.......................................................................2-6
2-39. APPLICATIONS
..................................................................2-6
2-41. Transistor
Tester................................................................2-7
2-46. Leakage Tester
..................................................................2-8
3 THEORY OF OPERATIONS
..........................................................3-1
3-1. INTRODUCTION
..................................................................3-1
3-3. OVERALL FUNCTIONAL DESCRIPTION........................3-1
3-8. BLOCK DIAGRAM
ANALYSIS...........................................3-2
3-9. AID
Converter..................................................................3-2
3-18. Input Signal
Conditioners.................................................3-2
4
MAINTENANCE.............................................................................4-1
4-1. INTRODUCTION
..................................................................4-1
4-3. SERVICE
INFORMATION...................................................4-1
4-7. GENERAL INFORM
ATION.................................................4-2
4-8. Access
Information............................................................4-2
4-17.
Cleaning.............................................................................4-3
4-19. Battery/Fuse Replacement
...............................................4-3
4-21. PERFORMANCE
TEST..........................................................4-3
4-23. initial
Procedure................................................................4-3
4-25.
DisplayTest.......................................................................4-3
4-27. Resistance/Conductance
Test..........................................4-4
4-29. DC Voltage
Test..................................................................4-4
4-31. AC Voltage
Test..................................................................4-4
4-33. DC Current
Test..................................................................4-5
4-35. CALIBRATION
....................................................................4-5
4-38. TROUBLESHOOTING
.......................................................4-5
5 LIST OF REPLACEABLE
PARTS..........................................................5-1
5-I.
INTRODUCTION...................................................................5-1
5-4. HOW TO OBTAIN
PARTS....................................................5-1
6 OPTIONS AND
ACCESSORIES..........................................................6-1
6-1.
INTRODUCTION...................................................................6-1
6-3. DELUXE CARRY! NO
CASE(C90).......................................6-1
6-5. BATTERY ELIMINATOR
(A81)...........................................6-1
6-7. TEMPERATURE
PROBE(80T-I50).....................................6-2
6-8. Introduction
....................................................................6-2
6-IÜ.
Specifications......................................................................6-2
6-11. CURRBNTTRANSFORMER
(801-600).............................. 6-2
6-12.
Introduction......................................................................6-2
6-14.
Specifications.....................................................................6-2
6-15. HIGH VOLTAGE PROBE(80K-40)
....................................6-2
6-16.
Introduction.......................................................................6-2
6-18.
Specifications...................................................................6-2
6-19. HIGH FREQUENCY PROBE(81RF)
................................6-2
6-20.
Introduction....................................................................6-2
6-22
Specifications......................................................................6-2
7 SCHEMATIC
DIAGRAMS................................................................7-1
SERVICE
CENTERS.............................................................................7-3
SERVICE
REPORT...............................................................................7-5
WARRANTY
APPENDIX A - Manual Change information
Fluke-7722-Manual-Page-1-Picture
Télécharger maintenant gratuit


Commentaires (1)

Vous commentez: Fluke 8020A
Sort
0/5 (0)
Facebookdel.icio.usStumbleUponDiggTechnoratiGoogle+RedditMySpaceTwitterLinkedIn
Gravatar
Mildred Felton a écrit...
I'm looking for fluke 8020a operator's guide. Its a card about 3 x 6.5 inches that fits inside the meter case. Ours is damaged and unreadable. If someone could scan and email both sides i could print and laminate. Thanks.
4 July 2016 21.04
Page 1 de 1

Ajouter un Commentaire

* Informations obligatoires
(ne sera pas publiée)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Out of 56, 14 or 27, which is the smallest?
 
Entrez la réponse:
 
Avertissez-moi des nouveaux commentaires par e-mail.
 
Se souvenir de moi sur cet ordinateur.
 
 
Powered by Commentics