Fluke PM 6303A LCR Mètre
Fabricant:
Image 1 de 1
Si vous avez d'autres photos ou manuels pour les
Fluke PM 6303A vous pouvez télécharger les fichiers ici .
Modèle:
PM 6303A
Date:
Catégorie:
Groupe:
Description:
Automatic RCL Meter
Information
MAIN FEATURES
The PM6303A Automatic RCL Meter is used for precise
measurements of resistance, capacitance and inductance. The
instrument provides auto-function and auto-ranging facility.
It allows fast and high precision measurements of passive
components over a wide range.
The component to be measured is connected to the instrument
via front panel test posts, the PM 9541A four-wire test
cable, or the PM 9542A four-terminal test adapter. The
Adapter PM 9542SMD or the PM 9540/7WE SMD Tweezers for
surface-mounted components are also available.
The measurement result, the numerical value, dimension, and
the equivalent circuit symbol, is immediately displayed on
the large four-digit liquid-crystal display (LCD), which is
updated at a rate of two measurements per second.
A microprocessor controls the measurement process, computes
the measurement value, and transfers the result to the display.
In the AUTO mode the dominant parameter, either R, C, or L
of the component under test is automatically selected for
display.
For example, for an inductance with a quality factor Q
between 1 and 500, the instrument indicates the measurement
value of the series inductance and as equivalent circuit
symbol, the series connection of a resistance and an inductance.
In addition to the AUTO mode, eight component parameters can
be selected manually by pressing pushbuttons:
■ Quality factor Q
■ Dissipation factor D
■ Parallel resistance Rp
■ Series resistance Rs
■ Impedance Z
■ Parallel capacitance Cp or parallel inductance Lp
■ Series capacitance Cs or series inductance Ls
■ Phase angle
An internal DC BIAS voltage can be added to the measurement
voltage for electrolytic capacitors.
The PM6303A RCL Meter is especially suited for use in
laboratories, for quality control, in service workshops, and
for educational purposes.
Type manuel:
Manuel de l'utilisateur
Pages:
90
Taille:
1.71 Mbytes (1792525 Bytes)
Langue:
english
Révision:
Manuel-ID:
951111
Date:
1995 01 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2018 01 20
MD5:
5fd0504ee98660092a393916d833d259
Téléchargements:
995
Information
SHIPMENT NOTE AND INITIAL INSPECTION
1 INSTALLATION AND SAFETY INSTRUCTIONS 1 - 1
1.1 SAFETY INSTRUCTIONS ' 1 - 1
1.1.1 Maintenance and Repair 1 - 1
1.1.2 Grounding (Earthing) 1-2
1.1.3 Connections 1 - 2
1.1.4 Line Voltage Setting and Fuses •I _ 3
1.2 OPERATING POSITION OF THE INSTRUMENT 1 “4
1.3 RADIO INTERFERENCE SUPPRESSION • 1—4
2 MAIN FEATURES 2 - 1
3 OPERATING INSTRUCTIONS 3 - 1
3.1 GENERAL INFORMATION 3 _ 1
3.2 TURNING THE INSTRUMENT ON 3 - 1
3.3 SELF-TEST ROUTINE 3 - 1
3.4 BRIEF CHECKING PROCEDURE 3-2
3.4.1 General 3-2
3.4.2 Functional Test 3-3
3.5 OPERATION AND APPLICATION 3-5
3.5.1 Control Elements, Display and Connections 3-5
3.5.2 Measurement Setup and Accessories 3-8
3.5.3 Automatic Zero Trim 3-13
3.5.4 Component Measurement 3-15
3.5. Out-of-Range and Error Messages 3-17
3.5.6 Component Measurement at Range Limits 3-18
3.6 MEASUREMENT PRINCIPLE 3-21
3.7 SELF DIAGNOSTICS 3-27
4 CHARACTERISTICS 4-1
4.1 SAFETY AND EMC REQUIREMENTS 4 - 1
4.2 PERFORMANCE SPECIFICATIONS 4-2
4.3 POWER SUPPLY 4-6
4.4 ENVIRONMENTAL CONDITIONS 4-6
4.5 SAFETY & QUALITY DATA; CABINET 4-8
4.6 ACCESSORIES 4-9
5 PERFORMANCE TEST
5.1 INTRODUCTION
5.2 RECOMMENDED TEST EQUIPMENT
5.3 SELF-TEST ROUTINE, ERROR MESSAGES
5.4 PERFORMANCE VERIFICATION
5.4.1 Measurement Voltage
5.4.2 Measurement Frequency
5.4.3 Open-Circuit Trimming
5.4.4 Short-Circuit Trimming
5.4.5 Resistor Measurement
5.4.6 Capacitance/Inductance Measurement
6 LIMITED WARANTY & LIMITATION OF LIABILITY, DECLARATION
OF CONFORMITY 6 - 1
INSTALLATION AND SAFETY INSTRUCTIONS IN FOREIGN LANGUAGES
FIGURES
Fig. 1 Front view
Fig. 2 Rear view
Fig. 3 PM 9540/TWE, SMD Tweezers
Fig. 4 PM 9540/BAN, 4-wire test cable with banana plugs
Fig. 5 PM 9541 A, 4-wire test cable
Fig. 6 Single and double test posts
Fig. 7 PM 9542SMD, SMD Adapter
Fig. 8 PM 9542A, RCL Adapter
Type manuel:
Manuel de l'utilisateur
Pages:
247
Taille:
18.34 Mbytes (19230407 Bytes)
Langue:
english
Révision:
2
Manuel-ID:
4822 872 10158
Date:
1999 02 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2018 01 28
MD5:
8ed68150085b4d125b029026e1018ea1
Téléchargements:
781
Information
1 INSTALLATION AND SAFETY INSTRUCTIONS
1.1 SAFETY INSTRUCTIONS
1.1.1 Maintenance and Repair
1.1.2 Grounding (Earthing)
1.1.3 Connections
1.1.4 Line Voltage Setting and Fuses
1.2 OPERATING POSITION OF THE INSTRUMENT
1.3 RADIO INTERFERENCE SUPPRESSION
2 MAIN FEATURES
3 OPERATING INSTRUCTIONS
3.1 GENERAL INFORMATION
3.2 TURNING THE INSTRUMENT ON
3.3 SELF-TEST ROUTINE
3.4 BRIEF CHECKING PROCEDURE
3.4.1 General
3.4.2 Functional Test
3.5 OPERATION AND APPLICATION
3.5.1 Control Elements, Display and Connections
3.5.2 Measurement Setup and Accessories
3.5.3 Automatic Zero Trim
3.5.4 Component Measurement
3.5. Out-of-Range and Error Messages
3.5.6 Component Measurement at Range Limits
3.6 MEASUREMENT PRINCIPLE
3.7 SELF DIAGNOSTICS
4 CHARACTERISTICS 4 - 1
4.1 SAFETY AND EMC REQUIREMENTS 4 - 1
4.2 PERFORMANCE SPECIFICATIONS 4-2
4.3 POWER SUPPLY 4-6
4.4 ENVIRONMENTAL CONDITIONS 4-6
4.5 SAFETY & QUALITY DATA; CABINET 4-8
4.6 ACCESSORIES 4-9
5 PERFORMANCE TEST 5-1
5.1 INTRODUCTION 5 - 1
5.2 RECOMMENDED TEST EQUIPMENT 5-1
5.3 SELF-TEST ROUTINE, ERROR MESSAGES 5-2
5.4 PERFORMANCE VERIFICATION 5-2
5.4.1 Measurement Voltage 5-2
5.4.2 Measurement Frequency 5-3
5.4.3 Open-Circuit Trimming 5-3
5.4.4 Short-Circuit Trimming 5-4
5.4.5 Resistor Measurement 5-4
5.4.6 Capacitance/Inductance Measurement 5-5
6 LIMITED WARANTY & LIMITATION OF LIABILITY, DECLARATION
OF CONFORMITY 6 - 1
INSTALLATION AND SAFETY INSTRUCTIONS IN FOREIGN LANGUAGES
FIGURES
Fig. 1 Front view
Fig. 2 Rear view
Fig. 3 PM 9540/TWE, SMD Tweezers
Fig. 4 PM 9540/BAN, 4-wire test cable with banana plugs
Fig. 5 PM 9541 A, 4-wire test cable
Fig. 6 Single and double test posts
Fig. 7 PM 9542SMD, SMD Adapter
Fig. 8 PM 9542A, RCL Adapter
SERVICE CENTERS
Type manuel:
Fiche technique
Pages:
5
Taille:
81.38 Kbytes (83332 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
1998
Qualité:
Électronique de documents, numérisation sans, bien lisible.
Date de transfert:
2023 01 21
MD5:
b17e53de4eb3f3547d14e8a3e6897cdd
Téléchargements:
481