Informations sur l'appareil:

Symetrix 528 Effect Processor
Fabricant:
Symetrix
Modèle: 528
Date: 1994
Catégorie: Équipement de musique
Groupe: Effect Processor
Description: Voice Processor
Information:
                                    The 528 Voice Processor contains five functions needed for
microphone signal processing: mic preamp (with phantom
power), de~esser, downward expander, compressor/limiter, and
parametric equalizer. The 528,s "normal" signal chain
includes all five functions, but the de~esser, the dynamics
processor (expander/compressor/limiter) and the parametric
EQ/notch filter may be individually bypassed with front
panel switches.

In addition, the versatility of the 528 is greatly enhanced
by its patching capabilities. Each section is brought out to
its own set of normalled rear panel terminations, so any
signal routing possibility is provided for, and patch bay
installations are supported.

Ces manuels sont disponibles pour les équipements ci-dessus :

Type de document: Manuel de l'utilisateur Symetrix-9914-Manual-Page-1-Picture
Nombre de pages: 38
Taille du fichier: 14.60 Mbytes (15310164 Bytes)
langue: Anglais
Révision: 1.2
Document ID/Numéro: 530196
Date: 15 avril 1994
qualité: Document scanné, tous les lisible.
Chargé sur:
MD5: 533789298e0c7ad6cdca5963d697b8ef
Téléchargements: 35 depuis 23 décembre 2017
Information:
1.Introduction
....................................................................

1.2	Microphone Preamplifier

1.3	Phantom Power.

1.4	Downward Expander, Compressor/Limiter .....................

1.3 Defining Dynamic Range

1.6 Dynamic Range as a
Specification.............................

1*7 Dynamic Range of Sounds and Signals

1.8	Why Dynamic Range Processrors are Necessary...........

1.9	Compressors are to Expanders as Limiters are to Gates

1.10	The Threshold
Concept............................................

1.11	The VCA - Voltage Controlled Amplifier 

1.12	Linear vs. Downward Expanders
................................

1.13	How Expanders Increase Usable Dynamic Range

1.14	Sidechain Processing

1.15	De-esser

1.16	Parametric Equalizer/Notch Filter

2.	Using the S28

2.1Getting* Started.

2.2	A Word About the Controls

2.3	Block Diagram.

2.4	Input/Output Connections

2.5	Patching/Sidechain Connections
................................

2»6	Mic Preamp Controls

2.1De-esser Controls.

2.8	Dynamic Range Processor
Controls.............................

2.9	Parametric Equalizer/Notch Filter Controls 

2.10	Output Gain Control 
Metering...................................

2.11	Installation	

3.	Fast First Time Setup

3.1	Connections	.

3.2	Mic Preamp Setup.

3.3	De-esser Setup
......................................................

3.4	Dynamic Range Processor
Setup................................

3.5	Parametric EQ/Notch Filter
Setup...............................

3-6	Output Settings
......................................................

3. /	Meter Readings

4.	Applications

4.1	Broadcast Applications

4.2	Using- the Parametric EQ/Notch
Filter.........................

4.2.1	Beware Distortion and Noise

4.2.2	Know What You Are Listening To	
4.2.3	Use Wide Peaks» Narrow Notches	

4.2.4	Tuning the EQ/Notch Filter.

4.2.5	Parametric EQ/Notch Filter Examples

4.3	Announce Mies — Compressing, Limiting-* Expanding......

4.4	Using- the Deesser

4.5	Cleaning Up News reeds

4.6	Increasing- Gain Before Feedback

4.7	Parametric EQ in the Sidechain

4.8	Using Sidecham EQ to Enhance Expander Action

4.9	Using Reverb or Effects.............................

4.10	Vocal Processing - Recording and Reinforcement.

4.11 Adding Dynamics, or "Punch

4.12	High Level Stage Monitors - Dynamic Processing

5.	528 Specifications.......................

6.	Troubleshooting Guide........................

6.1 Troubleshooting Table .

Symetrix-9914-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics