Informations sur l'appareil:

Spectracom 8164 Récepteur
Fabricant:
Spectracom
Modèle: 8164
Date: 1989
Catégorie: Radio et des communications
Groupe: Récepteur
Description: WWVB Disciplined Oscillator
Information:
                                    The SPECTRACOM MODEL 8164 WWVB RECEIVER DISCIPLINED
OSCILLATOR* is a frequency standard with accuracy directly
traceable to the National Bureau of Standards. The
SPECTRACOM MODEL 8206 ferrite loop antenna is used to
receive to 60 kHz carrier of WWVB.

The Model 8164 is continuously monitored against WWVB and
kept on frequency by a microprocessor. The oscillator
outputs can be used as a precise external input for
transmitters, receivers, counters, synthesizers, and other
electronic equipment. Figure 1-1 shows the Model 8164
Disciplined Oscillator and the Model 8206 Antenna.

1.1	FEATURES

The Model 8164 WWVB Receiver-Disciplined Oscillator offers
the following features:

BUILT-IN PHASE COMPARATOR - may be used to compare the phase
of the internal ovenized oscillator or local input with the
received WWVB signal. Results are recorded on the strip
chart recorder.

TRACEABILITY - verification to the National Bureau of
Standards is done by noting the hourly WWVB phase shift
identification. The hourly offsets appear as "tick” marks on
the strip chart recording.

ALARM STATUS - operational status is communicated by alarm
lamps and RS-422 alarm outputs.

SELECTABLE FRONT PANEL OUTPUTS - 0.1, 1.0, 5.0 or 10 MHz TTL
compatible signals of the phase locked and standard
oscillator outputs.

FREQUENCY OFFSETS - with the addition of a frequency offset
option, the internal 10 MHz standard oscillator is offset a
precise amount. The offset frequency used as a reference to
a television or paging transmitter reduces or eliminates
co-channel interference.

DISTRIBUTION OUTPUTS - with the addition of Option 03,
Built-In Distribution Amplifier, up to 25 remote stations
may use the standard outputs as a common time base.

Ces manuels sont disponibles pour les équipements ci-dessus :

Spectracom -- 8164 -- Service et Manuel de l'utilisateur
Nom du fichier: Spectracom-9380-Manual-Page-1-Picture
Type de document: Service et Manuel de l'utilisateur
Nombre de pages: 140
Taille du fichier: 5.58 Mbytes (5851567 Bytes)
langue: Anglais
Révision: 3.1
Document ID/Numéro:
Date: 01 août 1993
qualité: Document scanné, tous les lisible.
Chargé sur:
MD5: b79fff8ef975123ea89c180e546bf505
Téléchargements: 14 depuis 20 août 2017
Information:
INSTALLATION:

1.0
INTRODUCTION........................................................................1-2

1.1
FEATURES................................................................................1-2

1.2
UNPACKING..............................................................................1-2

1.3
RESHIPMENT............................................................................1-4

1.4	MODEL 8206 LOOP
ANTENNA..................................................1-4

1.5	ANTENNA
LOCATION................................................................1-4

1.6	ANTENNA
INSTALLATION........................................................1-6

1.7	MODEL 8211 ANTENNA
MOUNT................................................1-7

1.8	MODEL 8207 PREAMPLIFIER
INSTALLATION........................1-7

1.9	BENCH
OPERATION..................................................................1-8

1.10	OPTION 01 RACK
MOUNT........................................................1-8

1.11	OPTION 11 RACK MOUNT WITH
SLIDES................................1-9

1.12	PREPARATION FOR
USE..........................................................1-10

OPERATION:

2.0
INTRODUCTION........................................................................2-2

2.1	FRONT PANEL
FAMILIARIZATION..........................................2-2

2.2	REAR PANEL
FAMILIARIZATION............................................2-5

2.3	INTERNAL
SWITCHES..............................................................2-10

2.4	NBS
OUTPUTS..........................................................................2-12

2.5	WWVB IDENTIFICATION & CHART
RECORDINGS....................2-12

2.6	USING THE PHASE
COMPARATOR............................................2-16

2.7	TIME CODE
OUTPUTS..............................................................2-19

2.8	SIGNAL STRENGTH
MEASUREMENT..........................................2-20

2.9	RECEIVER PRINTOUTS AND
COMMANDS..................................2-20

SPECIFICATIONS:

3.0
INTRODUCTION........................................................................3-2

3.1
RECEIVER/COMPARATOR..........................................................3-2

3.2	FREQUENCY STANDARD
OUTPUTS............................................3-2

3.3	STANDBY
SUPPLY....................................................................3-3

3.4	STRIP CHART
RECORDER........................................................3-3

3.5	ALARM
LAMPS..........................................................................3-4

3.6	ALARM
OUTPUTS......................................................................3-4

3.7	DATA
STRUCTURE....................................................................3-4

3.8	MECHANICAL AND
INSTALLATION..........................................3-4

PRINCIPLES OF OPERATION:

4.0
INTRODUCTION........................................................................4-2

4.1	RF AMPLIFIER
A1..................................................................4-2

4.2	RECEIVER ASSEMBLY
A2........................................................4-10

4.3	OUTPUT AMPLIFIER
A4..........................................................4-17

4.4	OSCILLATOR AND POWER SUPPLY ASSEMBLY
A5..................4-17

4.5	FREQUENCY AND TIME COMPARATOR
A6................................4-23
OPTIONS AND ACCESSORIES:

5.0
INTRODUCTION........................................................................5-2

5.1	OPTION 03, BUILT-IN DISTRIBUTION AMPLIFIER............5-2

5.2	OPTION 31, 10 HZ TV CHANNEL
OFFSET............................5-10

5.3	OPTION 34,
SMARTSTART......................................................5-13

5.4	OPTION 36, PAGING TRANSMITTER
OFFSETS......................5-14

5.5	OPTION 56, SMALLER PAGING
OFFSETS..............................5-18

5.6	MODEL 8171A SYNCHRONIZED
CLOCK....................................5-21

SERVICE INFORMATION:

6.0
INTRODUCTION..........................................................................6-2

6.1	PERFORMANCE
CHECKS..............................................................6-2

6.2	TEST
EQUIPMENT......................................................................6-3

6.3	BENCH
SET-UP..........................................................................6-5

6.4	RECEIVER ALIGNMENT AND
CHECKS........................................6-5

6.5	OSCILLATOR AND POWER SUPPLY
CHECKS..............................6-9

6.6	FREQUENCY TIME COMPARATOR
CHECKS..................................6-10

6.7	ACCESSORY
TESTS....................................................................6-15

6.8
TROUBLESHOOTING....................................................................6-20

PARTS LIST:

7.0
INTRODUCTION........................................................................7-2

7.1	RF AMPLIFIER
ASSEMBLY......................................................7-2

7.2	RECEIVER
ASSEMBLY..............................................................7-3

7.3	OUTPUT AMPLIFER
ASSEMBLY................................................7-8

7.4	OSCILLATOR, POWER SUPPLY
ASSEMBLY..............................7-11

7.5	FREQUENCY TIME COMPARATOR
ASSEMBLY............................7-12

7.6	ANCILLARY
KIT......................................................................7-14
Spectracom-9380-Manual-Page-1-Picture
Démarrer le téléchargement gratuit


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Is it true or false that green is a number?
Powered by Commentics