Superior Instruments TV-12 Lampemètre
Fabricant:
Image 1 de 1
Si vous avez d'autres photos ou manuels pour les
Superior Instruments TV-12 vous pouvez télécharger les fichiers ici .
Modèle:
TV-12
Date:
1955
Catégorie:
Groupe:
Description:
Trans-Conductance Tube Tester
Information
The Model TV-12 Trans-Conductance Tube Tester was designed
to test tubes under dynamic conditions closely resembling
the operating conditions of the tube. It performs this
function by measuring the plate current of the tube under
test while under the direct influence of an in-phase grid
voltage applied to the tube. (See Page 9 for a detailed
explanation of the unique circuit employed in the Model(TV-12)
With its simplified controls, fast-acting roll chart,
self-cleaning lever switches and its English reading
“Replace-Weak-Good” meter, the Model TV-12 will quickly and
efficiently test the ever increasing niimber of tube types
used in Radio, TV etc. for quality, shorts, leakage and
noise. As an extra service, TRANSISTORS may be tested for
quality in a circuit which converts them to their tube
equivalents.
Simplification of switching and controls has enabled us to
present the operating instructions in a simple, easy to
understand style. On the following pages, we have
illustrated procedures wherever possible. We suggest you
study the data and the instrument panel before you attempt
to use the instrument. The 10 minutes spent in doing so will
be well invested for if you acquire a proper understanding
of how this instrument operates, it will become your most
frequently used piece of test equipment.
Like all better types of tube testers, the Model TV-12
provides the means of making the three basic tube tests.
1. Tests for shorts and leakages
2. Tests for quality (Good-Weak-Bad)
3. Tests for noise
An additional tube characteristic, mutual conductance, while
not necessary for ordinary servicing work, can be computed
from data supplied by the Model TV-12, (See Page 10)
It is always best to proceed with the short and leakage test
first and then follow through with the quality test. It is
advisable to do so because a “shorted” tube would be
identified as such when making the short and leakage test.
If such a tube were tested for quality first, it could
possibly damage the sensitive meter beyond repair.
Type manuel:
Manuel de l'utilisateur
Pages:
17
Taille:
19.90 Mbytes (20866521 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
1955 01 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2017 02 04
MD5:
54cb8ce8bbc9169fa4e2b430b4fd9fc8
Téléchargements:
755
Type manuel:
Manuel de l'utilisateur
Pages:
16
Taille:
25.49 Mbytes (26733342 Bytes)
Langue:
english
Révision:
Manuel-ID:
Date:
1955 01 01
Qualité:
Document scanné, tous les lisible.
Date de transfert:
2017 02 04
MD5:
a4af6f1a3cff740e5b1992de64a94121
Téléchargements:
861
Information
Tube Data