Thurlby Thandar Instruments TTI TF960 Compteur
Fabricant:
Modèle:
TF960
Date:
Catégorie:
Groupe:
Description:
6GHz Universal Counter

Information

The TF960 is a portable, battery-operated, universal Counter with a large 0.5" 10-digit liquid crystal display (LCD). The frequency range is from below 0.001Hz to over 6GHz and measurement functions include frequency, period, ratio, pulse width and count. The instrument uses a high quality temperature compensated internal frequency reference which has a low aging rate and is stable to within ±1ppm over the full temperature range. Its short warm-up time allows accurate measurements to be made even under portable battery powered conditions. Input A has configurable coupling (AC or DC), input impedance (1MΩ or 50Ω), attenuation (1:1 or 5:1), threshold (fully variable) and active edge and can be used for frequencies in the range 0.001Hz to over 125MHz. Input B is a nominal 50Ω input for frequencies in the range 80MHz to 3GHz. Input C is a nominal 50Ω input with an N-type connector for frequencies in the range 1GHz to over 6GHz. An External Reference input is provided and changeover from the internal timebase is automatic when an external reference standard is connected. For frequency, period and frequency ratio functions the instrument uses a reciprocal counting technique to provide high resolution at all frequencies. 8 significant digits of answer are produced in a 1 second measurement time, 9 digits in 10s and 10 digits in 100s with a granularity of less than 2 counts in the least significant digit. Indicators show measurement input configuration & function, measurement time & status, external reference connection, low battery and the units of the measurement which may be Hz, kHz, MHz, ns, us, ms or s. The instrument has a USB Interface which allows it to be remotely controlled using serial communication via a computer’s USB port. The remote commands of predecessor instruments, the TF830 and the TF930 are compatible with the TF960 command set The instrument operates from internal rechargeable NiMH batteries which give typically 24 hours operating life. The universal AC charger supplied will recharge the batteries in less than 4 hours and can be used for continuous AC operation. The instrument will also automatically be powered from a standard USB port when connected (whether remote control is in use or not) but this will not charge the batteries. This instrument is fully compliant with EN61010-1 Safety and EN61326 EMC standards.

plus

Manuel de l'utilisateur
Type manuel:
Manuel de l'utilisateur
Pages:
25
Taille:
210.28 Kbytes (215331 Bytes)
Langue:
english
Révision:
Issue 2
Manuel-ID:
45581-1440
Date:
Qualité:
Électronique de documents, numérisation sans, bien lisible.
Date de transfert:
2017 01 14
MD5:
ff8347d1bf4443276ce207936d7fa380
Téléchargements:
368

Information

Introduction 2 Specification 3 EMC 7 Safety 8 Connections 8 Manual Operation 10 Remote Operation 17 Maintenance 23

plus