Pioneer CDX-M8286ZT/UC Tuner CD de voiture
Fabricant:
Modèle:
CDX-M8286ZT/UC
Date:
1998
Catégorie:
Groupe:
Description:
AUDIO SYSTEM DISC PLAYER ASSY

Information

Lexus SC300 and SC4000 Audio system DISC PLAYER ASSY SPECIFICATIONS Power source ...............13.2 V(10.5 V — 16.0 V allowable) Grounding system........................................Negative type Maximum output voltage........................................2 Vrms Frequency characteristics ...........................±1.5 dB(20 Hz) ±1.5 dB(20 kHz) Signal-to-noise ratio ................................More than 80 dB Distortion....................................................Less than 0.1 % Separation................................................More than 65 dB

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages:
58
Taille:
3.43 Mbytes (3599490 Bytes)
Langue:
english
Révision:
Manuel-ID:
CRT2243 CRT2150
Date:
Qualité:
Électronique de documents, numérisation sans, bien lisible.
Date de transfert:
2014 05 17
MD5:
2590f3ac8469c2f9a0c691c2927339b8
Téléchargements:
2789

Information

This additional service manual is designed to be used together with Model CDX-M8086ZT.E,M8086ZT- 91/E Service Manual CRT2150. Refer to it for finding parts numbers and adjustment,etc. which are not shown in this manual. CDX-M8086ZT/E, CDX-M8086ZT-91.E, CDX-M8186ZT.WL, and CDX-M8186ZT-91/WL have adopted AVCLAN. - The CD mechanism employed in this model is one of C3TV series. - See the separate manual CX-624 (CRT1631) for the CD mechanism description and disassembly. - See the separate manual CDX-P616/UC (CRT1632) for CD circuit description. 1. SAFETY INFORMATION ... 3 2. EXPLODED VIEWS AND PARTS LIST ... 4 3. SCHEMATIC DIAGRAM ... 12 4. PCB CONNECTION DIAGRAM ... 22 5. ELECTRICAL PARTS LIST ... 30 6. ADJUSTMENT ... 33 7. GENERAL INFORMATION ... 43 7.1 IC ... 43 7.2 DIAGNOSIS ... 45 7.2.1 SELF-DIAGNOSTIC FUNCTION ... 45 7.2.2 DISASSEMBLY ... 49 7.2.3 TEST MODE ... 50 7.2.4 CONNECTOR FUNCTION DESCRIPTION ..51 7.3 EXPLANATION ... 51 7.3.1 SYSTEM BLOCK DIAGRAM ... 51 7.3.2 BLOCK DIAGRAM ... 52 8. OPERATIONS AND SPECIFICATIONS ... 54

plus