Thurlby Thandar Instruments TTI 1906 Multímetro digital
Fabricante:
Modelo:
1906
Fecha:
2009
Categoría:
Grupo:
Descripción:
Computing Multimeter

Información

This instrument is a mains operated, high performance autoranging multimeter providing 5½ digit resolution (± 210000 counts) switchable to 4½ digits (± 21000 counts) for a higher reading rate. It has a 7-segment l.e.d. display coupled with l.e.d. annunciators for displayed units and instrument status. The main features are :- • ARC serial Interface as standard, GPIB optional • True RMS AC measurements • Four-terminal Ohms • Selectable audible continuity checker • T/Hold mode - holds onto a stable reading until updated • Display nulling - a different value can be set up for each function • 100 point data logger - circular or linear store • Measurement post-processing:- percentage deviation from a user-entered reference decibel calculations linear scaling with offset limits comparison for go/no go testing automatic storage of minimum and maximum readings • Selectable digital Filter • Programmable buzzer • Battery-backed RAM :- storage of six instrument set-ups automatic power up with last used settings. retention of user entered references and scaling factors retention of logged data • Software calibration with constants stored in EEPROM

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
46
Tamaño:
394.49 Kbytes (403958 Bytes)
Idioma:
english
Revisión:
Issue 8
Manuel-ID:
48581-1070
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2013 11 03
MD5:
166796162a0d79fa13a814d7306ca4e4
Descargas:
637

Información

Introduction 1 Specification 2 Safety 5 EMC 7 Installation 8 Introduction to Front Panel 9 Making Basic Measurements 10 Advanced Features 13 Error Messsages 20 Default Instrument Settings 20 Remote Operation 21 Remote Commands 29 Maintenance and Repair 44

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
52
Tamaño:
415.94 Kbytes (425919 Bytes)
Idioma:
german
Revisión:
Issue 8
Manuel-ID:
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2013 11 03
MD5:
724a6ecdb11431435a7fc4607fdf21a2
Descargas:
490

Información

Introduction 1 Specification 2 Sicherheit 5 Installation 7 Einführung Zur Fronttafel 8 Grundmessungen 9 Fortgeschrittene Funktionen 12 Fehlermeldungen 21 Standardinstrumenteneinstellungen 21 Fernbetrieb 22 ARC-Fernbefehlsformate 30 Zusammenfassung der Fernbefehle 47 Wartung und Instandsetzung 49 Glossar 50

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
46
Tamaño:
1.09 Mbytes (1138765 Bytes)
Idioma:
english
Revisión:
Issue 7
Manuel-ID:
48581-1070
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2013 11 02
MD5:
8018e1732bc9bdac17f0aa5ec8598cde
Descargas:
632

Información

Introduction 1 Specification 2 Safety 5 EMC 7 Installation 8 Introduction to Front Panel 9 Making Basic Measurements 10 Advanced Features 13 Error Messsages 20 Default Instrument Settings 20 Remote Operation 21 Remote Commands 29 Maintenance and Repair 44

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
54
Tamaño:
635.23 Kbytes (650475 Bytes)
Idioma:
french
Revisión:
Issue 8
Manuel-ID:
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2015 05 08
MD5:
c57457770d68012888d8632d0b3d7aff
Descargas:
438

Información

Introduction 1 Specification 2 Securite 5 Installation 7 Presentation du panneau avant 8 Execution des mesures des base 9 Caracteristiques Evoluees 12 Messages d'erreur 20 Reglages par defaut de l'instrument 20 Fontionnement a distance 21 Commandes a distance 30 Resume des commandes a distance 45 Entretien et réparations 47 Glossaire 48

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
52
Tamaño:
1.16 Mbytes (1214149 Bytes)
Idioma:
german
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2015 05 08
MD5:
f107e17177424dde67bf931f4efbafa0
Descargas:
563

Información

Introduction 1 Specification 2 Sicherheit 5 Installation 7 Einführung Zur Fronttafel 8 Grundmessungen 9 Fortgeschrittene Funktionen 12 Fehlermeldungen 21 Standardinstrumenteneinstellungen 21 Fernbetrieb 22 ARC-Fernbefehlsformate 30 Zusammenfassung der Fernbefehle 47 Wartung und Instandsetzung 49 Glossar 50

ver más