Whirlpool ADP 4520 WH Lavavajillas
Fabricante:
Imagen 1 de 2
Imagen 2 de 2
Si tienes otras fotos o manuales para el
Whirlpool ADP 4520 WH puedes subir los archivos aquí .
Modelo:
ADP 4520 WH
Fecha:
2004
Categoría:
Grupo:
Descripción:
Dishwasher
Información
Technical data
Dimension of Free standing appliances with flat/
square outer door
Height 85.0 cm
Width 59.7 cm
Depth 59.6 cm
Weight 56 kg
Electronic boards
Service boards see spare part list
Serial boards see on the boards itself
Programmed control board and programing of
version , see „Board Service“ and „DATA“ on rating
plate of inner door:
UCB 704742
Data set 704732
Basic UCB, not programmed
see on the board itself 4619 727 04651
Succession of programs
Programs see program diagram
Succession P1a-P3a-P5c-P6a-P7a
Datas Energy Label
Reference program P5c
Energy Performance A
Cleaning Performance A
Drying Performance B
Alarms
Refill rinse aid
Refill salt
Program information
Start indicator
All programs will be locked after start. Changing
the program or finishing the program will be
possible only after pressing the start button for
longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the
appliance for a while, this will frozen the program
step and later on, the program continuos on the
same position.
Exception: Switching off the appliance or unplug
the appliance during the drying phase, this will lead
directly to the end of the program.
Water Volume at permanent spray system
Water Volume Level
Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Prewash 4.8 l 120 mm
Main wash 4.2 l 118 mm
Intermediate rinse 1 4.2 l 118 mm
Intermediate rinse 2 4.2 l 118 mm
Clear rinse 4.2 l 118 mm
Safety/ overflow 8.5 l 141 mm
Measuring the level
Remove the coarse sieve, put in a measuring
meter into the sump, measure the hight of the
water level.
Detergent max.
Pre-wash 10 cm3
Main-wash 40 cm3
Rinse aid 135 cm3
6 Dosage steps 1 - 6 ml
Water softener
Saltcontainer 2 kg
Resin container 700 cm3
Regeneration dosage 300 cm3
Water pressure
Inlet pressure 0.3 - 10 bar
Spray pump pressure 0.3 bar
Rotations
Spray pump motor 2800 RPM
Drain pump motor 3000 RPM
Spray arm lower 30 - 40 RPM
Spray arm upper 30 - 40 RPM
Type manuel:
Manual de servicio
Páginas:
16
Tamaño:
355.45 Kbytes (363979 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
4812 718 19693
Fecha:
2004 02 11
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2013 10 03
MD5:
463985d58d66a06d98f547fe5e8a5340
Descargas:
2062
Información
This documentation is only intended for qualified technicians who are aware of the respective
safety regulations.
Technical data 2 - 4
Spare part list 5 - 6
Exploded view 7 - 8
Circuit diagram 9
Program diagram 10
Text/Legend 11 - 16