Orban 105A Effect Processor
Fabricante:
No hay fotos disponibles!
Tal vez puedas subir por foto para el
Orban 105A ?
Si tienes otros manuales para el
Orban 105A puedes subir los archivos aquí .
Modelo:
105A
Fecha:
Categoría:
Grupo:
Descripción:
Reverberation
Información
The Orban/Parasound Reverberation system represents a
significant advance in increasing the performance/cost ratio
of artificial reverberation generators. New concepts in
driving electronics for the Hammond spring delay line have
resulted in the solution of problems typical to even the
highest priced units using this delay system.
The O/P Reverb is available in four models to meet a variety
of customer requirements.
MODEL 105A comes mounted behind a 1.5 x 9" panel, and is
designed to be mounted in mixing consoles using standard
modular strips. It has no internal Power Supply, and
requires + 15 volts of well-filtered DC at approximately 100 ma.
MODEL 105B is identical to model 105A except that an
internal Power Supply is provided, and the unit is powered
by the 110/220 volt AC line.
MODEL 105C is a 1 3/4" rack mounted version of the system.
It is self-powered from 110/220 volts AC. There is a
provision for the addition of a remote hard limiting
indicator lamp which can be mounted so that it can be easily
seen by the Mixer.
MODEL 105D consists of two model 105C's, mounted on a single
1 3/4" rack panel.
The economy of the O/P reverberation system makes multiple
echo channels economically feasible for many smaller
studios. The 105D provides maximum space economy.
All versions are supplied with a plug-in 4-spring delay line
assembly, which is mounted separately from the electronics.
Type manuel:
Servicio y Manual del usuario
Páginas:
8
Tamaño:
1.05 Mbytes (1100156 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2017 10 23
MD5:
c085a680a0af2ead5f7842f5dd90457f
Descargas:
1786