JBL 6022 Amplificador
Fabricante:
Modelo:
6022
Fecha:
Categoría:
Grupo:
Descripción:

Información

Architectural Specifications The Amplifier shall be single channel with an input gain control and an output level meter on the front panel. The Amplifier shall accommodate an unbalanced high impedance input, or a balanced low impedance input with an optional plug-in accessory transformer. The Amplifier shall be capable of delivering a minimum of 200 W, continuous sine wave, 20 Hz-20 kHz, into a 4 O load. 6021) The Amplifier shall incorporate an output transformer allowing full power operation, 35 Hz-20 kHz, into an 8 0,16 Q or 70.7 V line as well as a direct output terminal for a 4 H load.) 6022) No output transformer and only a direct output terminal shall be provided, but it shall be possible to install an output transformer easily at any time.) The Amplifier shall have < 0.2% THD, 20 Hz-20 kHz, @ 200 W, direct output. 6021) The Amplifier shall have < 0.2% THD, 35 Hz-20 kHz, @ 200 W, transformer output.) Frequency response shall be ± 0.5 dB, 20 Hz-20 kHz, @ 1 W. Power bandwidth shall be 10 fHz-40 kHz. Construction of the Amplifier shall be modular. The entire Amplifier circuit, except for the power supply 6021) and output transformer) shall be mounted on a single circuit board attached to the heat sink, which assembly shall be removable from the unit with the mainframe still mounted in a rack. Cables connecting the circuit board to the mainframe shall be of a length sufficient to allow removal of the board without disconnection and shall disconnect easily at two plugs. The Amplifier shall occupy four standard EIA rack spaces and shall operate on 120/240 V AC, 50/60 Hz.

ver más

Manual de servicio
Type manuel:
Manual de servicio
Páginas:
14
Tamaño:
2.69 Mbytes (2824875 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2017 09 25
MD5:
fcf93103f9c7371c921093cc305f23ff
Descargas:
961

Información

Installation and Service Manual

ver más