Combinova MFM 10 Medidor de nivel
Fabricante:
Modelo:
MFM 10
Fecha:
Categoría:
Grupo:
Descripción:
Magnetic Field Meter

Información

The MFM 10 is a compact, reliable and environmentally protected instrument to measure low frequency magnetic fields. When detecting and measuring magnetic fields it offers the following features: » Orthogonal coils, which means that fields can be measured independent of field direction. » A frequency range of 10 to 1,000Hz for all low frequency magnetic fields. » A wide dynamic range of 0.01 to 10,000μT with auto ranging, ensuring that the instrument is set at the optimum sensitivity for the detected field. » True RMS flux measurement, directional component and dominant frequency indication. » Polarization detection and presentation. For the operator in the field the designed portability of the MFM 10 means that the instrument is entirely self-contained. These features are: » Built-in rechargeable sealed lead batteries for portability and additionally avoiding Power supply interference. » A flexible measurement data logging facility, for up to 100 hours of measurements at frequent intervals. The stored results can later be printed out or transferred to a PC. » A complete set of accessories: transport case, tripod, battery charger, communication cable and this operator’s manual. » Fiber optic Interface kit for communication and remote control. The electronics in the instrument comprise analog amplifiers, a micro computer with communication peripherals and an alphanumerical LCD-display with back light. A built-in clock and calendar is used in the data logging measurement.

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
64
Tamaño:
815.56 Kbytes (835134 Bytes)
Idioma:
english
Revisión:
2A
Manuel-ID:
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2017 08 03
MD5:
e448af5d6f7dcfcea8f603add1d6f63e
Descargas:
593

Información

Section 1 - INTRODUCTION Magnetic Fields in the Environment The Instrument (Fig. 1.1) Using the MFM 10 Combinova AB - The Company Behind the Product Section 2 - UNPACKING AND INSPECTION Unpacking Inspection Checking the Battery Voltage Section 3 - OPERATING INSTRUCTIONS General Operation Measurement Data Retrieve Print Check Mode Parameters Battery Charging Section 4 - TECHNICAL DESCRIPTION Antenna Electronics Measurement Principle Printing with the MFM 10 Fiber Optic Remote Operation Fiber Adapter 10 Section 5 - SPECIFICATIONS Section 6 - ERROR CODES Instrument Errors Measurement Errors Data Retrieve Errors Print Errors

ver más