Epson EPL-N4000 Impresora
Fabricante:
No hay fotos disponibles!
Tal vez puedas subir por foto para el
Epson EPL-N4000 ?
Si tienes otros manuales para el
Epson EPL-N4000 puedes subir los archivos aquí .
Modelo:
EPL-N4000
Fecha:
1998
Categoría:
Grupo:
Descripción:
Laser Printer
Información
Features
EPL-N4000/N4000+ is non-impact page Printer applied with
laser xerographic method.
ENGINE FEATURES_
□ High speed & high reliability A3 engine.
□ Resolution:600 dpi
□ Printing speed:40 ppm (A4) / 40ppm (Letter)
□ Standard paper feeders are two universal cassettes (500
sheets x2) and manual feed tray (50 sheets)
□ Options: large-capacity paper unit (500 sheets(A4 to A3)
on MP tray + 1000 sheets on cassette 1 + 1000 sheets (A4,
Letter, and Executive sizes) on cassette 2)
Refer to Table 1-6, "Feeding Method," on page 10 for details.
□ Offset stacking equipped as standard
□ Wide range of options (Duplex Module, Face-up tray,
Envelope Feeder, Multibin Unit, Finisher Stapler*, HDD*)
NOTE: Finisher Stapler and HDD are only supported from
EPL-N4000+. Refer to Table 1-2 on page 4 for support range.
CONTROLLER FEATURES_
□ High speed controller, employing new CPU 64-bit RISC CPU
VR4700 133MHz
□ SDRAM DIMMs adopted
64MB RAM equipped as standard
Expandable up to 256 MB (using commercially available SDRAM
DIMMs) However, 256MB SDRAM DIMMs cannot be used.
□ Two standard interfaces IEEE 1284 parallel interface
Ethernet interface (100Base-TX)
□ 1 slot for Type B interface
Type B Level 3 is supported from EPL-N4000+.
□ Enhanced Micro Gray loaded
Type manuel:
Manual de servicio
Páginas:
306
Tamaño:
11.83 Mbytes (12404273 Bytes)
Idioma:
english
Revisión:
B
Manuel-ID:
SEPG98002
Fecha:
1999 09 01
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2017 04 17
MD5:
b7ed048bd70a7757cb4764f719949bdf
Descargas:
899
Información
This manual describes basic functions, theory of electrical
and mechanical operations, maintenance and repair procedures
of EPL-N4000.N4000+.
The instructions and procedures included herein are intended
for the experienced repair technicians, and attention should
be given to the precautions
on the preceding page.
This manual consists of six chapters and Appendix.
CHAPTER 1. PRODUCT DESCRIPTIONS
Provides a general overview and specifications of the
product.
CHAPTER 2. OPERATING PRINCIPLES
Describes the theory of electrical and mechanical
operations of the product.
CHAPTER 3. TROUBLESHOOTING
Provides the step-by-step procedures for the
troubleshooting.
CHAPTER 4. DISASSEMBLY AND ASSEMBLY
Describes the step-by-step procedures for
disassembling and assembling the product.
CHAPTER 5. ADJUSTMENTS
Provides Epson-approved methods for adjustment.
CHAPTER 6. MAINTENANCE
Provides preventive maintenance procedures and the
lists of Epson-approved lubricants and adhesives
required for servicing the product.
APPENDIX Provides the following additional information for
reference:
• Connector pin assignments
• Electric circuit boards components layout
• Exploded diagram
• Electrical circuit boards schematics
Type manuel:
Manual de servicio
Páginas:
195
Tamaño:
9.59 Mbytes (10061014 Bytes)
Idioma:
english
Revisión:
A
Manuel-ID:
Fecha:
1998 01 01
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2017 04 17
MD5:
f49d31a2745fff96a028fbf66da74e8a
Descargas:
734
Información
This manual describes basic functions, theory of electrical
and mechanical operations, and repair procedures of
EPL-N4000/N-400+ Optional
Finisher Stapler. The instructions and procedures included
herein are intended for the experienced repair technicians,
and attention should be given
to the precautions on the preceding page.
Contents
This manual consists of three chapters and Appendix.
CHAPTER 1. PRODUCT DESCRIPTIONS
Provides a general overview and specifications of the
product.
CHAPTER 2. OPERATING PRINCIPLES
Describes the theory of electrical and mechanical
operations of the product.
CHAPTER 3. DISASSEMBLY AND ASSEMBLY
Describes the step-by-step procedures for
disassembling and assembling the product.
APPENDIX Provides the following additional information for
reference:
• Connector pin assignments
• Electric circuit boards components layout
• Exploded diagram