Philips PM5190 Sintetizador
Fabricante:
Modelo:
PM5190
Fecha:
Categoría:
Grupo:
Descripción:
LF synthesizer 1mHz-2MHz

Información

The LF Synthesizer PM 5190 is a versatile high performance signal Generator. It produces three wave forms, namely sine wave, square wave or triangular wave form in the frequency range from 1mHz to 2MHz. The instrument is designed for most professional applications, where a stable signal source is asked for, for development laboratories, including calibration purposes and advanced educational programs. The frequency settings of the Synthesizer are highly accurate due to X-tal controlled generation. All basic signal parameters, i.e. frequency, amplitude, dc offset and wave form are set via keyboard in the local mode of operation. In addition all these parameters are remotely programmable via the built-in IEC bus Interface. In local as well as in remote operational mode these parameters are indicated by a bright seven segment LED display in combination with dimension and wave form LED1s. A microprocessor represents the central data processing and Control Unit of the instrument. It accepts input data from the keyboard or via IEC bus. After diagnosting and processing these data it stimulates the various functional units of the instrument for proper response via assigned I/O ports. In case of incompatible settings the microprocessor initiates the LED display flashing. A rub-out facility allows fast alteration or correction of keyboard input data. The inherent signal generation technique of the instrument is called direct digital signal synthesis: Succeeding digital samples of the signal are computated by a fast processing TTL circuitry and converted to analogue. This technique effects extreme fast responding on alternate frequency settings. Remote data programming is organized according to the international standard “Interface System for Programmable Measuring Apparatus", called IEC bus. So via the built-in IEC bus Interface the PM 5190 cooperates with all Philips and non-Philips IEC bus instruments. The dc output voltage may be selected separately or whenever used as dc offset voltage added to the output signal. The Generator provides external amplitude modulation facility. For TTL circuitry testing and stimulating a separate TTL output is available. All these facilities are built into a compact portable housing* The clearly designed frontpanel and the simplicity of keyboard input as well serve for convenient operating the instrument.

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
173
Tamaño:
13.43 Mbytes (14077649 Bytes)
Idioma:
english, german, french
Revisión:
Manuel-ID:
9499 453 00502
Fecha:
1980 05 15
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2023 02 24
MD5:
20dc4abc1bccc1b5d4e57075dee54433
Descargas:
230
Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
86
Tamaño:
50.75 Mbytes (53212355 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
9499 453 00502
Fecha:
1985 08 15
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2017 01 30
MD5:
99af556d6cda78d07c3157be3a59069f
Descargas:
1256

Información

1. GENERAL 1.1. Introduct ion E 1-1 1.2. Technical data E 1-2 1.3. Accessories E 1-7 1.4. Operating principle E 1-8 2. INSTALLATION INSTRUCTIONS 2.1. Initial inspection E 2-1 2.2. Safety instructions E 2-1 2.3. Mains voltage setting and fuses E 2-2 2.4. Operating position of the instrument E 2-2 2.5. Dismantling the instrument E 2-2 3 . OPERATING INSTRUCTIONS 3.1. Controls and sockets E 3-1 3.2. Operation E 3-3 3.3. IEC bus E 3-9 3.3.1. Introduction E 3-9 3.3.2. Remote operation E 3— 1C 3.3.3. Programming examples E 3-1 - 3.3.4. Application examples E 3— 2 ( SERVICE PART 4. CIRCUIT DESCRIPTION 4.1. Oscillator 4-1 4.2. IEC bus Interface 4-1 4.3. Control circuit 4-1 4.4. Keyboard and display 4-2 4.5. Digital signal synthesis 4-2 4.6. Digital to analog Converter 4-7 4.7. Low-pass Filter 4-8 4.8. Square wave Generator 4-8 4.9. Square wave pre-amplifier 4-9 4. 10. Amplitude modulation 4-9 4.11. Buffer Amplifier, amplitude control, compensation 4-9 4. 12. DC Generator 4-9 4.13. Output Amplifier, attenuator 4-10 4. 14. Power supply 4-10 5.1. Cabinet 5-1 5.2. Pushbuttons 5-1 5.3. Textplate 5-1 5.4. Unit 1 5-1 5.5. Unit 2 5-1 5.6. Unit 3, Unit 4 5-2 5.7. Fuse, mains transformer 5-2 6. CHECK AND ADJUSTMENT 6.1. General 6-1 6.2. Overall functional test 6-1 6.3. Diagnostic program 6-1 6.4. Adjustments 6-5 6.5. Final check and adjustment 6-9 6.6. Safety inspection and tests after repair and maintenance 6-11 7. SPARE PARTS 7-1 7.1. General 7-1 7.2. Static sensitive components 7-2 7.3. Handling MOS devices 7-3 7.4. Parts List 7-3 8. Figures 30 - 45 Fig.30 Block diagram Fig.31 Front view Fig.32 Rear view Fig.33 Handle spare parts Fig.34 BNC output sockets: spare parts Fig.35 Mains cable: spare parts Fig.37 Overall circuit diagram Fig.38 Unit 3, display p.c.b. lay-out Fig.39 Unit 4, keyboard p.c.b. lay-out Fig.40 Unit 4, keyboard circuit diagram Fig.41 Unit 3, display circuit diagram Fig.42 Unit 1, analogue p.c.b. lay-out Fig.43 Unit 1, analogue circuit diagram Fig.44 Unit 2, digital p.c.b. lay-out Fig.45 Unit 2, digital circuit diagram 9. CODING SYSTEM OF FAILURE REPORTING FOR QUALITY 10. ADDRESSES FOR SALES AND SERVICE 11. T + M REPLY CARD 12. PROGRAMMING CARD

ver más