BK Precision 1611 Fuente de alimentación
Fabricante:
Modelo:
1611
Fecha:
Categoría:
Grupo:
Descripción:
DC POWER SUPPLY

Información

The B & K-Preclsion Model 1611 DC Power supply is a high quality general purpose dc power source. The Power supply provides 0-50 volts dc output, adjustable with both coarse and fine controls for precise settability. The current output of the Model 1611 is 0-2 amps. Two current ranges, HI and LO, provide excellent current settability and meter resolution. Two large panel-mounted meters continuously monitor the output voltage and current. The Power supply exhibits excellent regulation and low ripple characteristics. The circuit design incorporates a preregulator, which greatly reduces internal power dissipation at low output voltages. The styling is both attractive and functional. The mechanical configuration conserves bench space and allows for easy portability. The instrument may be used in constant voltage or constant current applications. The crossover from constant voltage to constant current modes is smooth and automatic. LED's indicate the "CV" (constant voltage) or "CC" (constant current) mode of operation. In constant voltage applications, a current limit may be preset. When load variations cause the current to reach the preset limit, the unit then regulates output current rather than output voltage. Current limits are adjustable from 0% to 100% of maximum. In constant current applications, the maximum voltage may be preset. When load variations cause current to drop below the regulated value, the unit reverts to regulated voltage operation at the preset value. Reverse polarity protection prevents accidental damage to the Power supply from improper connection to an external voltage, and current limiting protects the equipment being powered, as well as the Power supply. The output is isolated from chassis and earth ground, which permits full flexibility of connections. When needed, the <+) or (-) polarity may be strapped to ground, or either polarity may be floated to an external voltage. Two supplies may be connected in series as a 0-to-100 volt power source, or two supplies may be connected in parallel, with suitable balancing resistors, for up to twice the output current. The Power supply is well suited for a wide variety of electrical and electronics applications, including service shops, engineering labs, production testing, school laboratories, and home use by hobbyists. 0-50 VOLTS Continuously variable over 0-to-50 volt range with coarse and fine controls. 0-2 AMPS 0-to-2 amps available. Rated for continuous duty at full output current. LABORATORY QUALITY Excellent regulation, low ripple. CONSTANT VOLTAGE OR CONSTANT CURRENT Provides regulated dc voltage output or regulated dc current output. Crossover is smooth and automatic. TWO CURRENT RANGES HI-LO switch selects full output (0-2 A), or one quarter output (0-0.5 A). LO range improves current settability and meter resolution at lower current values. Switch simultaneously selects range of adjustment and corresponding meter scale. BUILT-IN METERING Two large, easy-to-read meters continuously monitor output voltage and current. LED INDICATORS Act as pilot light and identify mode of operation. PRE-REGULATOR Limits internal dissipation for higher reliability. ISOLATED OUTPUT Either polarity may be floated or grounded. OVERLOAD PROTECTION Fully adjustable current limiting (from 0% to 100% of maximum output current) protects circuit under test and the power supply. REVERSE POLARITY PROTECTION Prevents damage to Power supply from external voltage of reverse polarity. STYLING Modern functional styling. Configuration conserves bench space and aids portability. Logical, convenient layout of controls. HOOK-UP CABLES Supplied with red and black hook-up leads.

ver más

Manual del usuario
Type manuel:
Manual del usuario
Páginas:
28
Tamaño:
1.24 Mbytes (1296880 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2017 01 24
MD5:
e47ac8a28b8097d0e4ee80908ce7467f
Descargas:
796

Información

TEST INSTRUMENT SAFETY ... inside front cover INTRODUCTION ... 3 FEATURES ... 4 SPECIFICATIONS ... 5 CONTROLS AND INDICATORS ... 7 OPERATING INSTRUCTIONS ... 9 Safety Precautions ... 9 Equipment Precautions ... 9 Hook-Up ... 9 Typical Constant Voltage Operation ... 12 Setting Current Limit ... 14 Typical Constant Current Operation ... .15 Connecting Two Power Supplies in Series ... 16 Connecting Two Power Supplies in Parallel ... .16 Page APPLICATIONS ... 19 General ... 19 Electronics Servicing ... 19 Electronics Manufacturing ... 19 Electronics Design Lab ... 20 Electronics Education ... 20 Battery Charging ... 20 MAINTENANCE ... 21 Fuse Replacement ... 21 Line Voltage Conversion ... 21 Adjustments ... 23 WARRANTY SERVICE INSTRUCTIONS ... 27 LIMITED ONE YEAR WARRANTY ... 28

ver más