General Radio Company 916-AL Otro
Fabricante:
No hay fotos disponibles!
Tal vez puedas subir por foto para el
General Radio Company 916-AL ?
Si tienes otros manuales para el
General Radio Company 916-AL puedes subir los archivos aquí .
Modelo:
916-AL
Fecha:
1967
Categoría:
Grupo:
Descripción:
Radio-Frequency Bridge
Información
The Type 916-AL Radio-Frequency Bridge is a null instrument
for use in measuring impedance at frequencies from 50 kc to
5 Me. The low-frequency limit is mainly determined by
sensitivity considerations and in most cases measurements
can be made with slightly decreased accuracy at frequencies
as low as 15 kc. Measurements can also be made at
frequencies somewhat above the nominal upper limit with
decreased accuracy and sensitivity.
The bridge is used with a series-substitution method for
measuring an unknown impedance, Zx, in terms of its series
resistance component, Rx, and series reactance component,
Xx. The resistance is read from a variable-capacitor dial
directly calibrated in resistance (in ohms). The reactance
is read from two variable-capacitor dials directly
calibrated in reactance at 100 kc. The resistance dial
reading is independent of frequency. The readings of the
reactance dials increase linearly with frequency. For
frequencies other than 100 kc the reactance dial readings
must therefore be divided by the operating frequency in
hundreds of kilocycles. The resistance dial reads from 0 to
1000S2; the main reactance dial from 0 to 11,000ft; and the
incremental reactance dial from 0 to 100ft at 100 kc.
Type manuel:
Servicio y Manual del usuario
Páginas:
20
Tamaño:
9.07 Mbytes (9505880 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
0916-0100-H
Fecha:
1967 02 01
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2016 12 30
MD5:
6074810372ecfe651da058bced841d83
Descargas:
654
Información
1.0
DESCRIPTION ... * ... 1
1.1 General
Description ... 1
1.2 Basic Circuit and Balance Conditions ... 1
1.3 Complete
Circuit ... 2
1.4 Panel Layout and
Controls ... 2
1.5 Accessories Supplied
... 3
2.0
OPERATION ... 3
2.1
Generator ... 3
2.2
Detector ... 3
2.3 Grounding
... 4
2.4 Stray Pickup
... 4
2.5 Transformer
Installation ... 5
2.6 Initial
Balance ... 5
2.7 Measurement of Unknown Impedance ... 5
3.0 CHECKS AND
ADJUSTMENTS ... 13
3.1 Resistance Calibration .
... 13
3.2 Correction for Dielectric Loss in Reactance
Capacitor ... 13
Wiring Diagram for Type 916-AL Radio-Frequency Bridge