Farnell Instruments GORSQ E SERIES Fuente de alimentación
Fabricante:
Modelo:
GORSQ E SERIES
Fecha:
1991
Categoría:
Grupo:
Descripción:
bench Power Supply

Información

This book covers all models in the E/B series of stabilised bench power supplies. The series offer a choice of output voltage and output current. By use of a slider switch the precision analogue meter is used to display output voltage or output current. A push button switch is used to turn the Power supply on and off. A green LED is used to indicate the power ‘on’ condition. A 10 turn precision potentiometer is use to vary the output voltage over its range from near zero to its maximum rating. The Power supply is protected against current overloads by electronic current limiting preset at approximately 110% of the nominal output current rating. In operation this circuit remains approximately constant. On removal of the overload the output will reset to its original value. The current limit condition is indicated by a red LED near the output terminals. The Power supply incorporates circuitry that gives limited protection against the application of external voltages in the reverse and forward mode and thus the unit may be used for battery charging and parallel applications.

ver más

Manual de servicio
Type manuel:
Manual de servicio
Páginas:
32
Tamaño:
9.34 Mbytes (9790622 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
9HEB
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2016 01 25
MD5:
c5181e17b6b7457e573b09278d01b02c
Descargas:
689

Información

1. SCHEDULE OF EQUIPMENT ... 2 2. INTRODUCTION ... 3 3. SPECIFICATION ... 4 4. INSTALLATION ... 6 5. OPERATING INSTRUCTIONS ... 7 6. APPLICATIONS ... 8 7. CIRCUIT DESCRIPTION ... 9 8. RECALIBRATION ... 10 9. MAINTENANCE ... 11 10. CIRCUIT DIAGRAMS ... 12

ver más