Información del equipo:

Krohn-Hite Corporation 4500 Oscillator
Fabricante:
Krohn-Hite Corporation
Modelo: 4500
Fecha:
Categoría: Los instrumentos de medición
Grupo: Oscillator
Descripción: Ultra-Low Distortion RC Oscillator
Información:
                                    The Krohn-Hite Model 4500 is an ultra-low distortion, stable
amplitude oscillator designed for test and measurement
applications in the 1Hz to 100kHz frequency range.
The 4500 produces a virtually "distortion free" (<0.001%)
sinewave for measuring harmonic distortion in audio
pre-amplifier and power amplifier circuits. It also
generates squarewaves with aberrations of less than 5% peak
to peak amplitude. The exceptionally flat response of the
4500 (+0.05dB) eliminates the need to constantly monitor
voltage levels during amplifier response tests.
The unit delivers up to 7 volts rms open circuit to MAIN and
INVERTED OUTPUTS of 600 ohm impedance. A MAIN OUTPUT of 50
ohms impedance is also provided. A four position pushbutton
ATTENUATOR calibrated in 20dB steps together with a 30dB
vernier provides a total dynamic range of 90dB. Amplitude
and frequency stability varies less than 0.001% with a 10%
change in line voltage.
Sumultaneous INVERTED (180°) OUTPUT is provided for
synchronizing a scope or as an auxiliary output. The output
is fixed at 7 volts rms from a 600 ohm source impedance.
Frequency tuning is provided by a 10:1 tuning dial and a 5
band decade multiplier .
When combined with Krohn-Hite' s Ultra-Low Distortion
Analyzer 6800A/6900 Series, it provides a complete
distortion measurement system.

Estos manuales están disponibles para el equipo anterior:

Krohn-Hite Corporation -- 4500 -- Servicio y Manual del usuario
Nombre del archivo: KrohnHite-7105-Manual-Page-1-Picture
Tipo de manual: Servicio y Manual del usuario
Páginas: 24
Tamaño: 863.85 Kbytes (884586 Bytes)
Idioma Inglés
Revisión:
Manual-/ número de identificación:
Fecha:
Calidad: Documento Scaned, todo legible.
Fecha de carga:
MD5: 7196c97706beda5693123e14a0f46158
Descargas: 103 desde 06 septiembre 2015
Información:
Operating and Maintenance Manual

1.0 GENERAL DESCRIPTION.................................... 1
1.1 INTRODUCTION......................................... 1
1.2 SPECIFICATIONS................................... 1
1.3 GENERAL SPECIFICATIONS...................................2
2.0
OPERATION......................................................5
2.1 INTRODUCTION............................................5
2.2 POWER REQUIREMENTS.......................................5
2.3 TURN-ON PROCEDURE......................................5
2.4 CONTROLS AND CONNECTORS.................................5
2.5 OPERATION................................................6
3.0 INCOMING ACCEPTANCE AND ROUTINE PERFORMANCE TESTS.
............ 9
3.1 INTRODUCTION. ..........................................9
3.2 PROCEDURE ............... .................. 9
4.0 CIRCUIT
DESCRIPTION............................................13
4.1 THEORY OF OPERATION ................ ...... ........ 13
4.2 AVC OPERATION ............................................13
5.0
CALIBRATION...................................................15
5.1 INTRODUCTION. ........ .............................15
5.2 CALIBRATION PROCEDURE ....................................15
5.3 POWER SUPPLY..............................................16
5.4 OUTPUT DC LEVEL ADJUSTMENTS ..............................16
5.5 DIAL CALIBRATION. ........................................16
5.6 FREQUENCY CALIBRATION (XI, ΧΙΟ, X1K)......................16
5.7 FREQUENCY CALIBRATION (X10R). ............................16
5.8 DIAL CONFORMITY CHECK....................................17
5.9 DISTORTION ADJUSTMENT ..... ...........................17
5.10 SQUAREWAVE
CALIBRATION....................................17
6.0
MAINTENANCE.................................................19
6.1 INTRODUCTION............................................19
6.2 MAINTENANCE PROCEDURE...................................19
7.0 PARTS LIST, SCHEMATICS AND BOARD LAYOUTS............... .21
7.1 ORDERING INFORMATION....................................21
7.2 ORDERING UNLISTED PARTS
.................................. 21
KrohnHite-7105-Manual-Page-1-Picture
Descarga gratuita de inicio


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the word hand backwards.
Powered by Commentics