Información del equipo:

Kikusui Electronics Corporation PAB 70-1 Fuente de alimentación
Fabricante:
Kikusui Electronics Corporation
Modelo: PAB 70-1
Fecha:
Categoría: Los instrumentos de medición
Grupo: Fuente de alimentación
Descripción: REGULATED DC POWER SUPPLIES
Información:
                                    Kikusui PAB Series Regulated DC Power Supplies are compact,
light, transistorized series regulator type, and provides
larger current rates for its sizes. The output voltage is
finely variable for a range of 0 to the rated voltage with a
10-turn potentiometer or a combination of coarse and fine
adjustment potentiometers. A voltmeter and an ammeter are
mounted on the front panel.
To guard against overload and shorting of the output
circuity PAB Series are incorporated with a
constant-current-type current limiting circuit which
operates positively. The limiting current value is
continuously variable for a range of 10$ - 100% of the rated
current, and PAB Series can be used as a constant-current
power supply.
Two units of the same model can be operated in parallel in a
one-control mode (master-slave mode) of operations thereby
doubling the output current rating.
Up to four unit can be installed on a 19-inch standard rack,
using the frame and mounting brackets which are available as
options.

Estos manuales están disponibles para el equipo anterior:

Tipo de manual: Servicio y Manual del usuario Kikusi-7052-Manual-Page-1-Picture
Páginas: 19
Tamaño: 689.07 Kbytes (705605 Bytes)
Idioma Inglés
Revisión:
Manual-/ número de identificación:
Fecha:
Calidad: Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de carga:
MD5: c21183316bdc440ff9b945160a8038c7
Descargas: 614 desde 14 agosto 2015
Información:
1. GENERAL
.......................................................................................
1
2. SPECIFICATIONS
............................................................................
2
3. EXPLANATION OP PANEL ITEMS
................................................... 4
4. OPERATION METHOD
......................................................................
7
4.1 Operation
..........................................................................
7
4.1.1 Single Operation
.................................................. 7
4.1.2 Series Operation
.................................................... 7
4.1.3 Overload Protection when in Series Operation. 8
4.1.4 Parallel Operation
............................................... 9
4.2 Conditions of Use
.......................................................... 12
4.3 Voltage Drop by Ammeter
.............................................. 12
4.4 Current Limiting Circuit
............................................ 12
5. MAINTENANCE
................................................................................
14
Schematic Circuit Diagram
Kikusi-7052-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics