Henry Radio 2K-3 Amplificador
Fabricante:
Modelo:
2K-3
Fecha:
0
Categoría:
Grupo:
Descripción:
Linear Amplifier

Información

The 2K-3 Linear Amplifier is a one stage Amplifier designed for SSB/ CW, FSK, and AM operation with any exciter capable of 80 to 160 watts PEP output. The 2K-3 is capable of maximum legal input on the amateur bands from 3.5 to 29.7 megacycles. In addition the Amplifier can be operated on frequencies outside the amateur bands. On freq-uencies far removed from the amateur bands, it may be necessary to re-tune the appropriate cathode-pi inf>ut module. These plug-in modules are located adjacent to the 3-500Z tubes and carry the individual band designations 10 through 80 meters. The 2K-3 is a one piece floor console consisting of a complete RF deck and a separate Power Supply chassis. The Amplifier is normally supplied for operation from a three wire 220 volt 50-60 cycle circuit. The unit can quickly be adapted for operation from 110 volts 50-60 cycles by rewiring the terminal block mounted on the right front corner of the Power Supply chassis behind the console front door. Both connections are pictorially depicted elsewhere in these instructions.

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
27
Tamaño:
4.10 Mbytes (4299694 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Fecha de subida:
2015 08 07
MD5:
62a022d51e06279a1cfd27ac04f4f780
Descargas:
637