Tektronix P6021 Sonda
Fabricante:
Modelo:
P6021
Fecha:
0
Categoría:
Grupo:
Descripción:
60 MHz Current Probe

Información

The P6021 current Probe converts an alternating current waveform to a voltage that can be displayed and measured on an Oscilloscope display. The Probe provides accurate current measurements over a wide range of frequencies and allows you to measure current without breaking the circuit. The P6021 Probe is compatible with general purpose oscilloscopes having a 1 MΩ input impedance. The P6021 Probe comes with a passive termination that matches Oscilloscope and Probe impedance, optimizes the Probe performance, and provides two sensitivity settings. In the standard configuration, the P6021 Probe comes with a 5-foot cable and termination. The P6009 is a low-input-capacitance, high-voltage passive Probe with a signal attenuation of 100X. It is designed for use with wide band, real-time oscilloscopes, and may be used with any Plug-In unit or Oscilloscope having a 1 megohm input resistance and an input capacitance of 15 to 47 pF. The Probe is available with a standard BNC output connector or with a special BNC connector for readout oscilloscopes. The readout version is recommended for use only with a Tektronix 7000-Series Mainframe (with readout) or the Tektronix 485 Oscilloscope. When used with these instruments, the special connector on the Probe causes the Oscilloscope readout to switch, automatically correcting for attenuation of the Probe. The P6009 consists of a probe-body assembly, a 9-foot cable, and a compensating-box assembly with a BNC connector. The compensating box houses adjustments for optimizing the high-frequency response of the Probe.

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
56
Tamaño:
394.26 Kbytes (403722 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
070-0947-05
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2014 05 23
MD5:
9d2004f20160acbf881f62742d13312b
Descargas:
1009

Información

General Safety Summary ... . ... iii Service Safety Summary ... . ... v Contacting Tektronix ... . ... vi Operator Information ... . ... 1 Description ... . ... 1 Installation ... . ... 1 Operating Considerations ... . ... 4 Service Information ... . ... 7 Warranted Characteristics ... . ... 7 Typical Characteristics ... . ... 10 Circuit Description ... . ... 12 Performance Verification ... . ... 14 Adjustment Procedures ... . ... 16 Maintenance ... . ... 26 Replaceable Electrical Parts ... . ... 31 Parts Ordering Information ... . ... 31 Using the Replaceable Electrical Parts List ... . ... 31 Replaceable Mechanical Parts ... . ... 37 Parts Ordering Information ... . ... 37 Using the Replaceable Mechanical Parts List ... . ... 37 Index ... . ... 43

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
54
Tamaño:
435.94 Kbytes (446399 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
070-0947-06
Fecha:
Formato:
Documento electrónico, sin análisis, muy bien legible.
Fecha de subida:
2019 09 13
MD5:
b0f42dae6a8d7f3956cd6d2e1d1f3d0b
Descargas:
343

Información

General Safety Summary ... . Service Safety Summary ... . Contacting Tektronix ... . Operator Information ... . Description ... . Installation ... . Operating Considerations ... . Service Information ... . Warranted Characteristics ... . Typical Characteristics ... . Circuit Description ... . Probe Performance ... . Performance Verification ... . P6021 Test Record ... . Adjustment Procedure ... . Maintenance ... . Replaceable Electrical Parts ... . Parts Ordering Information ... . Using the Replaceable Electrical Parts List ... . Replaceable Mechanical Parts ... . Parts Ordering Information ... . Using the Replaceable Mechanical Parts List ... . Index ... .

ver más