Johnson Viking 6N2 Otro
Fabricante:
Modelo:
Viking 6N2
Fecha:
0
Categoría:
Grupo:
Descripción:
VFO Variable Frequency Oscillator

Información

Good workmanship and careful adherence to instructions are necessary in the building and operating of the 6N2 Meter Variable Frequency Oscillator. Although the design of this VFO was carried out with the objective of reducing the number of critical circuits to a minimum and making assembly simple, the capacitor and inductor values of the tuned circuit components were necessarily chosen with a given parts layout; therefore, the builder should duplicate the layout shown in the illustrations and described in this test. Circuits should be checked against the schematic diagram during the several steps of assembly. Much time and effort may be saved by finding an error or deviation from the illustrated layout before the unit is completed. Read each step through before commencing the operation.

ver más

Servicio y Manual del usuario
Type manuel:
Servicio y Manual del usuario
Páginas:
20
Tamaño:
1.68 Mbytes (1763842 Bytes)
Idioma:
english
Revisión:
Manuel-ID:
Fecha:
Formato:
Documento Scaned, todo legible.
Fecha de subida:
2014 03 01
MD5:
afe5accdbb85086745df5b6e11d4ceac
Descargas:
688

Información

1. CHASSIS COMPONENT ASSEMBLY 1 2. UNDERCHASSIS WIRING 2 3. TOP CHASSIS WIRING 5 4. PRELIMINARY TESTS AND CHECKOUT 6 5. CABINET, POINTER AND PANEL ASSEMBLY 7 6. TWO METER CALIBRATION 8 7. TEMPERATURE COMPENSATION ADJUSTMENT 10 8. SIX METER CALIBRATION 11 9. OPERATION 12 10. ILLUSTRATIONS 11. PARTS LIST Following Illustrations

ver más