Equipment information

Hewlett Packard 8554B
Manufacturer
Hewlett Packard
Model 8554B
Date 1973
Category: Measurement instruments
Group
Description Spectrum Analyzer RF Section
Information
                                    The HP Model 8554B Spectrum analyzer RF Section covers the
frequency range from 100 kHz to 1250 MHz. When it is
combined with an IF Section and a Display Section it
functions as the tuning section of an RF spectrum analyzer.

The analyzer electronically scans input signals and displays
their frequency and amplitude on a CRT. The horizontal,
x-axis, is calibrated in units of frequency and the
vertical, y-axis, is calibrated in absolute units of voltage
(/j.V or mV) or power (dBm). Absolute or relative
measurements of both amplitude and frequency can be easily made.

These manuals are available for the above equipment:

Hewlett Packard -- 8554B -- Service and User Manual
File name HewlettPackard-4930-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 197
Size 23.35 Mbytes (24483679 Bytes)
Language english
Revision
Manual-ID/Number 08554-90035
Date September 1974
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 07924ca39b04ce2132663c09605eb300
Downloads 145 since 27 November 2013
Information
This manual applies directly to instruments with serial
numbers prefixed 1245A.

For additional important information about serial numbers,
see INSTRUMENTS COVERED BY MANUAL in Section I.

Section II, Installation: provides information about initial
inspection, preparation for use, and storage and shipment.

Section III, Operation: provides information about panel
features, and provides operating checks, instructions, and
maintenance information.

Section IV, Performance Tests: provides the information
required to verify that the instrument is performing as
specified in Table 1-1.

Section V, Adjustments: provides the information required to
properly' adjust and align the instrument.

Section VI, Replaceable Parts: provides ordering information
for all replaceable parts and assemblies.

Section VII, Manual Changes: this section is reserved to
provide manual change information in future revisions of
this manual.

Section VIII, Service: provides the information required to
repair the instrument.
HewlettPackard-4930-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Out of 56, 14 or 27, which is the smallest?
Powered by Commentics