Equipment information

Hewlett Packard 5087A Amplifier
Hewlett Packard
Model 5087A
Date 1973
Category: Measurement instruments
Group Amplifier
Description Distribution Amplifier
                                    The Hewlett-Packard Model 5087A is a narrow-band amplifier
capable of receiving up to four different input frequencies
on three input channels. It amplifies these frequencies and
supplies outputs in any selected combination on a total of
12 output lines. Table 1-4 lists the assembly designation,
description, function, where it is used, the corresponding
HP part number and its assigned option number.

The three input lines are labeled A, B, and C while the 12
outputs lines are labeled 1 through 12. Each input line, as
well as the 12 output lines and the power supply voltage,
may be monitored by a front-panel meter through a
16-position front-panel switch.

All input and output connectors and fuses are mounted on the
instrument rear panel. All controls and indicators are
mounted on the instrument front panel.

These manuals are available for the above equipment:

Manual Type Service and User Manual HewlettPackard-4907-Manual-Page-1-Picture
Pages 92
Size 51.33 Mbytes (53818537 Bytes)
Language english
Manual-ID/Number 05087-90008
Date January 1977
Quality Scanned document, reading partly badly, partly not readable.
Upload date
MD5 189711fe169ea16daa62ecae9b72bdc8
Downloads 258 since 24 November 2013
This manual applies directly to HP Model 5087A Distribution
Amplifiers having serial prefix 1620A.

For serial prefixes greater than 1620A, a “Manual Changes”
sheet is included with this manual.

Information in this manual applies directly to the
instrument “normal configurations” listed in Table 1-1. In
addition to the “normal configurations”, this manual applies
to all options listed in Paragraph 1-10.

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics