|CT Systems INC 3000B Other|
CT Systems INC
|Description||Communications Service Monitor|
The Model 30008 is a compact, lightweight Service Monitor for testing FM and AM transceivers . Its low (25 lb) weight permits use in the field, powered by a vehicle battery. The frequency range is 400 kHz to 1000 MHz in 100 Hz steps. An audio synthesizer permits generation of subaudible tones and timed tone bursts . In receive mode, an internal counter displays frequency error, modulation frequency, or received sub-audible tone frequency . RF voltage level is continuously variable from 0.03 pVRMS to 316 mVRMS. An internal CRT display shows modulation waveform and relative signal strength . A meter reads modulation, SINAD (using the internal 1 kHz tone source), audio input voltage, or RF power from 1 to 100 W. The internal load eliminates the possibility of damage from accidental keying . The meter and CRT both display the same information, including SINAD, noise and distortion ; however, only the meter indicates power, and only the CRT indicates relative signal strength .
These manuals are available for the above equipment:
|CT Systems INC -- 3000B -- Service and User Manual|
|Manual Type||Service and User Manual|
|Size||24.49 Mbytes (25684716 Bytes)|
|Quality||Scanned document, all readable.|
|Upload date||18 November 2013|
|Downloads||1136 since 18 November 2013|
SECTION 1 GENERAL INFORMATION 1 .1 Introduction 1 .2 Specifications SECTION 2 PREPARATION FOR USE 2.1 Introduction 2.2 Unpacking and Inspection 2.3 Pre-turn On 2.4 Power Requirements 2.5 Environmental Considerations SECTION 3 OPERATION 3.1 Introduction 3.2 Front Panel Description 3.4 Initial Turn-On 3.5 RF Generator with Single-Source FM 3.6 RF Sweep 3.7 RF Generate with Multiple Source FM 3.8 RF Generate with AM 3.9 SINAD Measurements 3.10 AC Voltmeter 3.11 RF Wattmeter 3.12 CRT FM/AM Measurements 3.13 Lissajous 3.14 Relative Signal Strength 3.15 Auto Calibration SECTION 4 THEORY OF OPERATION 4.1 Overall 4.2 A10 Front Panel Board 4.3 A11 Frequency Control Board 4.4 A3 High Frequency Synthesizer 4.5 A2 Low Frequency Synthesizer 4.6 A1 Mixer Board 4.7 A4 IF Amplifier 4.8 A5 Audio Board 4.9 A7 Deflection Board 4.10 Miscellaneous Board SECTION 5 MAINTENANCE 5.1 Introduction 5.2 Service and Maintenance Information 5.3 Performance Tests/Calibration 5.4 Troubleshooting SECTION 6 REPLACEABLE PARTS 6.1 Introduction 6.2 Manufacturers Code * * * Parts Lists SECTION 7 SCHEMATICS
|Start Free Download|
No comments yet. Be the first!