Equipment information

IOTech Digital488 Interface
Manufacturer
IOTech
Model Digital488
Date 1990
Category: Measurement instruments
Group Interface
Description IEEE 488 to Digital I/O Interface
Information
                                    The Digital488 is a digital input and output interface to
the IEEE 488 bus. Each unit has 40 TTL level digital I/O
lines, which are divided, into 5 eight-bit ports. Each
port is software programmable as input or output. The
Digital488 has several features, which give it versatile
interface capability. A trigger output signal is asserted
on the Group Execute Trigger (GET) command. Edge-triggered
inputs can generate a Service Request on the bus. Six
data formats are software programmable, including ASCII
hexadecimal, ASCII character, ASCII binary, binary, high
speed binary and ASCII decimal. There are also individual
bit set and bit clear commands. Programmable terminators
are provided to facilitate interfacing to various
controllers.

These manuals are available for the above equipment:

IOTech -- Digital488 -- User Manual
File name IOTech-4594-Manual-Page-1-Picture
Manual Type User Manual
Pages 62
Size 2.00 Mbytes (2099424 Bytes)
Language english
Revision 6.0
Manual-ID/Number 110-0901 and/or 916895
Date 1990
Quality Electronic document, no scan, very well readable.
Upload date
MD5 c5062291f638e962debb84dc404fc236
Downloads 218 since 13 July 2013
Information
IOTech-4594-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Type the numbers for four hundred seventy-two.
Powered by Commentics