Equipment information

Tektronix SG 5030 Generator
Manufacturer
Tektronix
Model SG 5030
Date 1990
Category: Measurement instruments
Group Generator
Description Programmable Leveled Sine Wave Generator
Information
                                    The SG 5030 Programmable Leveled Sine Wave Generator
is a GPIB programmable TM 5000-series plug-in instrument
designed to provide a low-distortion sinusoidal waveform
with leveled output amplitude. Frequency, amplitude,
and the front-panel store/recall parameters are fully
programmable. Parameter values are displayed by 8 seven-segment
LEDs in the display window. The SG 5030 output amplitude
is programmable from 4.5mV to 5.5V peak-to-peak into 50Q,
and has a frequency range of 0.1 Hz to 550MHz with a
reference frequency of 50kHz. Additional connectors
provide timebase input and output reference signals
to external sources.

These manuals are available for the above equipment:

Tektronix -- SG 5030 -- User Manual
File name Tektronix-4516-Manual-Page-1-Picture
Manual Type User Manual
Pages 98
Size 11.07 Mbytes (11608603 Bytes)
Language english
Revision Revised
Manual-ID/Number 070-7705-01
Date January 1992
Quality Scanned document, all readable.
Upload date
MD5 ef371cb709455ec02237b53c1d54de76
Downloads 698 since 27 April 2013
Information
Table of Contents

Operator Safety Summary .............................v

Section 1 Specifications............................1-1

Introduction...................................1-1

Instrument Description...................... ........1-1

Electrical Characteristics.............................1-2

Section 2 Operating Instructions .......................2-1

Preparation For Use..............................2-1

Front Panel Controls, Connectors And Display.................2-2

Operators Familiarization.............................2-6

Power-Up Sequence.............................2-6

Function and Parameter Selection .......................2-6

Making Bandpass Measurements.......................2-10
Tektronix-4516-Manual-Page-1-Picture
Start Free Download


Tektronix -- SG 5030 -- Service and User Manual
File name Tektronix-4517-Manual-Page-1-Picture
Manual Type Service and User Manual
Pages 223
Size 17.66 Mbytes (18521479 Bytes)
Language english
Revision Revised
Manual-ID/Number 070-7703-01
Date March 1992
Quality Scanned document, all readable.
Upload date
MD5 747805af4504b9ce57562e4b96b7d2e1
Downloads 642 since 28 April 2013
Information
Table of Contents

Operator Safety Summary . . . .........................vii

Service Safety Summary..............................viii

Section 1 Specifications............................1-1

Introduction...................................1-1

Instrument Description..............................1-1

Electrical Characteristics.............................1-2

Section 2 Operating instructions .......................2-1

Preparation For Use.............................2-1

Front Panel Controls, Connectors and Display.................2-2

Operator Familiarization .............................2-6

Power-Up Sequence.............................2-6

Function and Parameter Selection.......................2-6

Making Bandpass Measurements.......................2-10
Section 3 Programming............................3-1

Introduction...................................3-1

IEEE-488 Interface Function Subsets .....................3-1

Commands...................................3-2

Command Summary.............................3-3

Messages and Communication Protocol......................3-16

Message Protocol..............................3-17

Instrument Responses to IEEE-488 Interface Messages.............3-18

Remote-Local Operation ...........................3-18

Status And Error Reporting..........................3-19

Error Messages Sent To The Front Panel ...................3-20

Bus Error/Event Codes And Serial Poll Response ...............3-21

Power-on Sequences And Settings ......................3-21

Programming Examples .............................3-24

WARNING I

The remaining portion of this Table of Contents liste information that may expose personnel to hazardous voltages. The information listed in the remaining sections of this manual is for qualified personnel only.

Section 4 Theory of Operation ........................4-1

Introduction...................................4-1

SG 5030 Overview..............................4-1

Block Diagram Description............................4-2

Circuit Theory Notes...............................4-3

Detailed Circuit Description............................4-4
Section 5 Performance Check.........................5-1

Introduction...................................5-1

Test Equipment Required ............................5-1

Preparation...................................5-4

1.	Check Frequency Accuracy ........................5-4

2.	Check Spectral Purity...........................5-6

3.	Check Amplitude Accuracy.........................5-9

4.	Check Amplitude Flatness.........................5-11

5.	Check Output VSWR ...........................5-17

Section 6 Adjustment Procedure .......................6-1

Introduction...................................6-1

1.	Preparation................................6-1

2.	Adjust Output Hybrid Bias .........................6-2

3.	Adjust Internal Timebase Frequency ....................6-4

4.	Set Offset and Gain Cal Constants.....................6-5
Section 7

Maintenance ............................7-1

Introduction...................................7-1

General Maintenance ..............................7-1

Loss of NVRAM...............................7-1

Troubleshooting Aids.............................7-1

Output Hybrid Bias Setup ..........................7-5

Cleaning ..................................7-5

Obtaining Replacement Parts...........................7-7

Diagnostics...................................7-8

1.	Self Tests ................................7-9

2.	Operational Errors.............................7-11

Removal Instructions...............................7-12

Cabinet Side, Top, and Rear Panel Removal..................7-12

Circuit Board Removal............................7-12

Section 8

Options...............................8-1

Section 9

Replaceable Parts Lists.......................9-1

Parts Ordering Information ..........................9-1

Parts List Entry Description..........................9-1

Cross Index - Mfr. Code Number to Manufacturer .................9-2

Replaceable Electrical Parts ...........................9-5

Replaceable Mechanical Parts ..........................9-33

Accessories...................................9-35

Standard Accessories ............................9-35

Optional Accessories.............................9-35

Section 10

DIAGRAMS AND CIRCUIT BOARD ILLUSTRATIONS ........10-1
Tektronix-4517-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Enter the third word of this sentence.
Powered by Commentics