Equipment information:

EIP Incorporated 535B Frequency counter
Manufacturer:
EIP Incorporated
Model: 535B
Date: 1988
Category: Measurement instruments
Group: Frequency counter
Description: Microwave Frequency Counters
Information:
                                    The 535B/538B series counters are microprocessor-based
heterodyne instruments. The 535 and 538 span the frequency
range from 10 Hz to 20 GHz and 10 Hz to 26.5 GHz respectively.
Through keyboard control, the 53XB series counters provide
frequency offsets and frequency multiplication. Options
include full systems capability via GPIB, high stability
time bases, and frequency extension to 20 GHz for 535B.
Measurements are presented on a 12 digit LED display
that is sectionalized to read GHz, MHz, kHz, and Hz.
Full frequency range is covered in three bands. Band 1
is a high impedance input (1 M ohm/20 pF) and spans
a 10 Hz to 100 MHz range, with a sensitivity of 25 mV RMS.
Band 2 has an input impedance of 50 ohms, a 10 MHz to
1 GHz range, a sensitivity of -20 dBm. Band 3 has an
input impedance of 50 ohm nominal over a range of 1 GHz
to 20 GHz (or 26.5 GHz), and a sensitivity to -30 dBm
(typical).

These manuals are available for the above equipment:

EIP Incorporated -- 535B -- Service and User Manual
File name: EIP-4313-Manual-Page-1-Picture
Manual Type: Service and User Manual
Pages: 203
Size: 2.28 Mbytes (2390976 Bytes)
Language: english
Revision: first edition
Manual-ID/Number: 5580034-01
Date: February 1988
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: 7aa8a440c3c28ac2a5d138c9a841739a
ed2kID: 2cbdf782d805be1bf345b3f6a86e288e
Downloads: 242 since 30 March 2013
Information:
Section 1, General Information

Description..........................1-1

Specifications ........................1-2

Section 2, Installation

Installation..........................2-1

Counter Identification...................2-1

Shipping and Storage....................2-1

Performance Checkout Procedure ...........2-1

Section 3, Operation

Front Panel Controls and Indicators..........3-1

Display..........................3-1

Operating Status....................3-2

Signal Input.......................3-3

Rear Panel Controls and Connectors..........3-4

Keyboard...........................3-5

Units...........................3-5

Clear (Data/Display).................3-5

Band Selection........................3-6

Resolution/Gate Time Selection ............3-7

Display and Data Entry Sequence ...........3-8

Multiply Function .....................3-9

Test Selection....................... 3-10

Frequency Offsets .................... 3-11

Set-Up for Basic Frequency Measurement.....3-12

Display Error Messages .................3-12

Section 4, Theory of Operation

General.............................4-1

Basic Counter ........................4-2

Band 2 Converter......................4-2

Band 3 Converter......................4-7

Converter Control A108...............4-7

Converter A203 ........................................4-7

Operation........................4-9

Section 5, Maintenance and Service

Fuse Replacement .....................5-1

Air Circulation........................5-1

Periodic Maintenance ...................5-1

Factory .........................5-2

Field ...........................5-2
PAGE
Section 6, Troubleshooting

Signature Analysis .....................6-1

Free Running......................6-1

Program Controlled..................6-3

Self Diagnostics.......................6-3

Keyboard Controlled Circuit Tests...........6-4

Tests ..............................6-6

Significant Addresses, I/O Ports............ 6-8

Significant Addresses, RAM ..............6-10

Troubleshooting Trees..................6-11

Test Equipment Required ...............6-11

Section 7, Adjustments and Calibrations

General.............................7-1

Power Supply Adjustments................7-1

Converter Calibration ...................7 3

Coarse Adjustment..................7-3

Fine Adjustment ...................7-4

Time Base Calibration...................7-5

Temperature Compensated Crystal

Oscillator (TCXO).....................7-5

TCXO Calibration......................7 6

Display Intensity ......................7-6

Section 8, Performance Tests

General.............................8-1

Variable Line Voltage...................8-1

Required Test Equipment ................8-1

Band 1.............................8-1

Band 2.............................8 2

Band 3.............................8 2

Section 9, Functional Description and Illustrated Parts Breakdown

Reference Designators...................9-1

Abbreviations ........................9 1

Assembly Locations and Cable Connections Guide . 9-2 53X Microwave Counter Top Assembly

Parts List..........................9-3

53X Overall Block Diagram ...............9-5

A100 Counter Interconnect..........................100-1

A10 Power Supply ....................................101-1

A105 Microprocessor ..................................105-1

A106 Count Chain......................................106-1

A107 Gate Generator ..................................107-1

A108 Converter Control ..............................108-1

A109 Band 2 Converter
Section 9, (Continued)

A110 Front Panel Display and Keyboard .... 110-1

A111 Front Panel Logic................ 111-1

A203 Microwave Converter ............. 203-1

Section 10, Options

Option 03, Time Base Oscillators ..........03/4/5-1

04, 05 Oven Oscillator Power Supply.....03/4/5-3

Oven Oscillator Calibration.......03/4/5-4

Option 08, General Purpose Interface Bus (GPIB) . . . 08-1

GPIB Functions Implemented.........08-1

Setting Address Switch .............08-1

Device Dependent Data Input.........08-2

GPIB Instruction Format............08-2

Formal Definition of Instructions......08-3

Program Code Set.................08-4

Available Commands...............08-6

Data Output Format.............. 8-10

Program Examples................8-11

Reading Measurement..............8-12

Allowable Address Codes............8-13

Parts List ......................8-15
Option 09, Rear Input.........................09-1

Option 10, Chassis Slides.......................10-1

Option 11, Extended Frequency.................. 11-1

Option 12, Increased Sensitivity .................. 12-1

Option 13, MATE-CIIL Interface .................... 13-1

Appendix A, Accessories........................A-1

Service Kit ........................A-1

Appendix B, List of Manufacturers .................B-1
EIP-4313-Manual-Page-1-Picture
Start Free Download


Comments (1)

Topic: EIP Incorporated 535B
Sort
0/5 (0)
Facebookdel.icio.usStumbleUponDiggTechnoratiGoogle+RedditMySpaceTwitterLinkedIn
Gravatar
Jason Powell says...
Yo!
18th June 2016 1:24am
Page 1 of 1

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the opposite word of small?
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics