Hewlett Packard 3585A Spectrum analyzer
Manufacturer:
Image 1 of 42
Image 2 of 42
Image 3 of 42
Image 4 of 42
Image 5 of 42
Image 6 of 42
Image 7 of 42
Image 8 of 42
Image 9 of 42
Image 10 of 42
Image 11 of 42
Image 12 of 42
Image 13 of 42
Image 14 of 42
Image 15 of 42
Image 16 of 42
Image 17 of 42
Image 18 of 42
Image 19 of 42
Image 20 of 42
Image 21 of 42
Image 22 of 42
Image 23 of 42
Image 24 of 42
Image 25 of 42
Image 26 of 42
Image 27 of 42
Image 28 of 42
Image 29 of 42
Image 30 of 42
Image 31 of 42
Image 32 of 42
Image 33 of 42
Image 34 of 42
Image 35 of 42
Image 36 of 42
Image 37 of 42
Image 38 of 42
Image 39 of 42
Image 40 of 42
Image 41 of 42
Image 42 of 42
If you have any other photos or manuals for the
Hewlett Packard 3585A you can upload the files here .
Model:
3585A
Date:
1979
Category:
Group:
Description:
Information
The 3585A is a 20 Hz to 40.1 MHz, microcomputer controlled
spectrum Analyzer. It may be utilized for spectrum analysis
or network analysis (amplitude only) applications. As a
spectrum Analyzer, the 3585A provides a graphic display of
the spectral components of the input signal. For network
analysis measurements, the 3585A Tracking Generator can be
used as a drive signal for the network under test. The
network’s output can then be applied to the 3585A input to
obtain a graphic display of the network’s amplitude versus
frequency response.
The 3585A is structured as a conventional triple-conversion,
swept super-heterodyne spectrum Analyzer. The addition of
microcomputer hardware control and data manipulation greatly
enhances the analytical power of the 3585A, Flexible control
of the displayed trace is obtained through dedicated key
subroutines that produce optimum displayed results in a
minimum amount of time.
Microcomputer control gives the 3585A several unique
features. The most obvious feature is the keyboard entry of
parameters which replaces more conventional knobs. The input
attenuation and mixer levels are automatically set by the
3585A’s Auto Range feature to maintain the specified dynamic
range. Other microcomputer controlled features include:
coupling of Frequency Span, Bandwidth and Sweep Time;
centering of signals; moving signals to the Reference Level
and storage and measurement of frequency and amplitude
Offsets. Microcomputer control further allows the operator
to over-ride the automatic features of the 3585A,
Manual type:
Service and User Manual
Pages:
276
Size:
17.26 Mbytes (18095580 Bytes)
Language:
english
Revision:
Volume II
Manual ID:
03585-90001
Date:
Quality:
Scanned document, all readable.
Upload date:
2012 07 21
MD5:
1a0052b130702b36e1a82a5687841f31
Downloads:
947
Information
Serial Number 1750A00101 and greater.
Manual type:
Service Manual
Pages:
274
Size:
17.28 Mbytes (18124062 Bytes)
Language:
english
Revision:
Manual ID:
03585-90001
Date:
Quality:
Scanned document, all readable.
Upload date:
2013 11 22
MD5:
d0546bde50be0bcd308a4869a162d547
Downloads:
929
Information
Serial numbers: 1750A00101 and above
Volume II
Manual type:
User Manual
Pages:
378
Size:
12.88 Mbytes (13505308 Bytes)
Language:
english
Revision:
Manual ID:
03585-90003
Date:
Quality:
Scanned document, all readable.
Upload date:
2013 11 22
MD5:
eb8bc983f10259ab74e8d90ceab7167f
Downloads:
816
Information
Serial numbers: 1750A00101 and above
This Operating Manual contains information necessary to
install, operate, and test the Hewlett-Packard Model 3585A
Spectrum Analyzer.
This manual is divided into four sections, each covering a
specific topic or aspect of the instrument:
1 General Information
II Installation and Interfacing
III Front Panel and Remote Operation
IV Performance Tests