Hewlett Packard 8746B Other
Manufacturer:
Model:
8746B
Date:
1971
Category:
Group:
Description:
S-Parameter Test Set

Information

DESCRIPTION 1-16. The HP Model 8746B S-Parameter Test Set contains the necessary microwave circuits for measuring all four s-parameters of an active or passive two-port device from 0.5 to 12.4 GHz. ~he Model 8746B is designed primarily to be used WIth the Hewlett-Packard Model 11608A Transistor Fixture. However, measurements on other microwave devices may also be made by inserting the necessary coaxial line-lengths in the rea: panel refere?ce line. The Model 8746B is used WIth a compatIble phase-amplitude· ratio indicator, such as the HP Model 8410A Network Analyzer or Model 8405A Vector Voltmeter. Measuring circuits for each s-parameter are automatically set with front-panel pushbuttons or with remote-contact closures. Attenuation of the incident RF signals can also be set with front-panel pushbuttons or remote contact-closures. Figure 3-4 is a diagram of the RF circuits for the standard 8746B,

show more

Service and User Manual
Manual type:
Service and User Manual
Pages:
139
Size:
49.14 Mbytes (51529346 Bytes)
Language:
english
Revision:
Manual ID:
08746-90007
Date:
Quality:
Scanned document, all readable.
Upload date:
2012 07 20
MD5:
7e461618bf2c0ed7b877a3c4322dad14
Downloads:
1262

Information

S-PARAMETER Test Set Serials Prefixed: 1114A This manual applies directly to HP Model 8746B S-Parameter Test Set Units having serial numbers prefixed 1114A. Serials Prefixed: 983- See Section VII, Manual Changes Other Prefixes: See Instruments Covered by Manual, Section I

show more

Service Manual
Manual type:
Service Manual
Pages:
132
Size:
20.03 Mbytes (21001557 Bytes)
Language:
english
Revision:
Manual ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2015 05 31
MD5:
bce1aa514b58808f4005022060a54c0e
Downloads:
961

Information

This manual contains all information required to install, operate, test, adjust and service the Hewlett-Packard Model 8746B S-Parameter Test Set. This section covers instrument identification, description, options, Accessories, specifications and other basic information. Included with this manual is the Operating Information Supplement which is a reprint of the first three sections of this manual. Figure 1-1 shows all of the equipment normally supplied with the instrument for the standard Model or Option 001 or 002. Table 1-1 in the manual is the Table of Specifications.

show more