Equipment information

Thurlby Thandar Instruments TTI TG550 Generator
Thurlby Thandar Instruments TTI
Model TG550
Category: Measurement instruments
Group Generator
Description Precision 5MHz Function Generator
                                    The TG550 is a precision 5MHz function generator with
waveforms of sine, triangle, ramp. pulse and DC from a
variable amplitude 50Ω or 600Ω output. A TTL/CMOS auxiliary
output is also provided.
The frequency range is 0·005Hz to 5MHz selected by a seven
decade range multiplier and calibrated vernier. Both the
frequency vernier and the sweep input can give 1000:1
frequency change within a selected range. Frequency can be
locked to a crystal reference to give superior frequency
stability. A 10:1 symmetry range permits ramp and pulse
waveforms to be produced.
The generator output level is 20Vpk-pk maximum from a
50/600Ω source. The level is set via a switched attenuator
plus vernier with a total range of >80dB. DC offset is
vernier adjustable over a ±10V range with centre detent for
0V. Waveform quality is good at all frequencies and signal
The TG550 also has internal LIN/LOG sweep with sweep output.
Amplitude modulation of up to 100% is possible using the
internal 400Hz oscillator or an external source.
The large liquid crystal display shows frequency and
amplitude simultaneously. Good resolution and a fast display
update rate are maintained at all frequencies. The display
can also be used as an external 20MHz frequency meter with
up to 7-digit resolution.
Additional display annunciators indicate generator status
when sweep, AM, etc. are in use.

These manuals are available for the above equipment:

Manual Type User Manual Thurlby-8402-Manual-Page-1-Picture
Pages 43
Size 264.46 Kbytes (270811 Bytes)
Language english
Revision Issue 7
Manual-ID/Number 48591-0560
Quality Scanned document, all readable.
Upload date
MD5 81d320b79be3157174a25d17b8d34ef5
Downloads 132 since 14 January 2017
Introduction 2
Specification 3
Safety 8
Installation 9
Operation 10
Calibration and Maintenance 13
Instructions en Francais
Sécurité 14
Installation 15
Fonctionnement 16
Calibrage et maintenance 20
Bedienungsanleitung auf Deutsch
Sicherheit 21
Installation 22
Betrieb 23
Kalibrierung und Wartung 27
Istruzioni in Italiano
Sicurezza 28
Installazione 29
Funzionamento 30
Calibrazione e Manutenzione 34
Instrucciones en Español
Seguridad 35
Instalación 36
Funcionamiento 37
Calibrado y Mantenimiento 41

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics