Equipment information

Telecommunications Techniques Corporation 43440 Interface
Manufacturer
Telecommunications Techniques Corporation
Model 43440
Date 1997
Category: Measurement instruments
Group Interface
Description DS1/DS3 ATM INTERFACE
Information
                                    The DS1/DS3 ATM Interface Module enables the FIREBERD 6000
Communications Analyzer to test ATM circuits and equipment
operating at the DS1 rate of 1.544 MHz as well as the DS3
rate of 44.736 MHz. The module is capable of performing the
following tests:
• DS 1 and DS3 physical layer analysis including line and
framing error detection, alarm indicators, etc.
• TC sub-layer tests include PLCP and HEC based cell
mapping; PLCP alarms, statistics and error insertion; and
HEC generation, checking, and erroring.
• ATM layer tests include transmitting and receiving cells
with a pre-defmed or user-defined payload, measuring cell
round trip delay and traffic shaping conformance per ATM
Forum GCRA requirements, monitoring lost or misinserted
cells, generating/receiving OAM cells, and automatic
scanning of active VPI/VCIs.
• AAL layer tests include automatically recognizing AAL1,
3/4, or 5 activity on a selected VPI/VCI, and acquiring
AAL1, 3/4 or 5 SAR PDU and AAL 3/4 or 5 CS PDU statistics.
Support for IEEE 488.2 control is incorporated into the
FIREBERD 6000 and can be used to control and
monitor DS1/DS3 ATM Interface Module.

These manuals are available for the above equipment:

Telecommunications Techniques Corporation -- 43440 -- User Manual
File name TTC-8375-Manual-Page-1-Picture
Manual Type User Manual
Pages 72
Size 2.69 Mbytes (2820832 Bytes)
Language english
Revision B
Manual-ID/Number 50-14440-01
Date 01 November 1997
Quality Scanned document, all readable.
Upload date
MD5 90d1856666956fec3086a480b648b779
Downloads 23 since 09 January 2017
Information
1 GENERAL INFORMATION
..................................................................................................1-1
1.1 Manual
Summary.....................................................................................................................................
1-1
L2 DS1/DS3 ATM Interface Module
Overview.........................................................................................
1-1
1.3 Interface
Compatibility............................................................................................................................
1-1
1.4
Cables........................................................................................................................................................
1-2
2 INTERFACE DESCRIPTION
...............................................................................................................2-1
2.1 Introduction
....................................................................................................................................
2-1
2.2 Physical
Description................................................................................................................................2-1
2.2.1 DS3 [N/DS3 OUT/CLOCK IN
Connectors.......................................................................................2-2
2.2.2 DS1 IN/DS1 OUT
Connectors............................................................................................................2-2
2.3 Self-Loop
Operation................................................................................................................................2-2
2.4 Timing
Sources.........................................................................................................................................2-2
3 INSTALLATION AND OPERATION
...................................................................................................2-1
3.1 Introduction
.............................................................................................................................................2-1
3.2 Interface
Installation................................................................................................................................2-1
3.3 FIREBERD 6000 Mainframe Setup
.........................................................................................................2-2
3.4 Interface Setup
.........................................................................................................................................2-3
3.4.1 ACCESS
Menu....................................................................................................................................2-5
3.4.2 TC
Menu................................................................................................................................................2-8
3.4.3 FORMAT
Menu................................................................................................................................2-10
3.4.4 TX
Menu............................................................................................................................................2-11
3.4.5 RX
Menu.............................................................................................................................................2-25
3.4.6 SCAN
Menu......................................................................................................................................2-32
3.5 FIREBERD 6000 Analysis Results
......................................................................................................2-33
3.6 Interface Status Indicators
.....................................................................................................................2-37
3.7 FIREBERD 6000 Printer
Operation.....................................................................................................2-37
3.8 Auxiliary Functions
...............................................................................................................................2-38
4 INTERFACE SPECIFICATIONS
............................................................................................4-1
4.1 Introduction
.............................................................................................................................................4-1
5 MAINTENANCE AND SERVICE
............................................................................................5-1
5.1 Introduction
............................................................................................................................................5-1
5.2 Maintenance .
...........................................................................................................................................5-1
5.2.1 In Case of
Difficulty............................................................................................................................5-1
5.3 Service .
....................................................................................................................................................5-1
5.3.1 Warranty Policy
.................................................................................................................................5-1
5.3.2 In-Warranty Service
.............................................................................................................................5-2
5.3.3 Out-of-Warranty Service
.....................................................................................................................5-2
5.3.4 Equipment Return
Instructions............................................................................................................5-2
A FACTORY DEFAULT SETTINGS
.........................................................................................,...
A-1
A. I Introduction
............................................................................................................................................A-l
B REMOTE CONTROL
COMMANDS.................................................................................................B-1
B.l Introduction
.............................................................................................................................................B-l
INDEX
INDEX-1
TTC-8375-Manual-Page-1-Picture
Start Free Download


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
What is the next number: 10, 12, 14, ..?
Powered by Commentics