Rohde & Schwarz FSP31 1164.4391.31 Spectrum analyzer
Manufacturer:
Model:
FSP31 1164.4391.31
Date:
Category:
Group:
Description:
User Manual
Manual type:
User Manual
Pages:
180
Size:
2.58 Mbytes (2709616 Bytes)
Language:
english
Revision:
Manual ID:
1164.4556.62-01
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2016 12 11
MD5:
7727d3a01e3db161a83e19b207b53c78
Downloads:
2288

Information

Quick Start Guide Contents Safety Instructions Certificate of Quality Support Center Adress List of R&S Representatives 1Front and Rear View ... 1.1 Front view ... 1.2 Function Keys on the Front Panel ... 1.4 Rear View ... 1.6 Spectrum Analyzers Connections ... 1.8 Front Panel of the Instrument ... 1.8 Rear Panel of the Instrument ... 1.10 2Putting into Operation ... 2.1 Putting into Operation ... 2.2 Unpacking the Instrument ... 2.2 Setting Up the Instrument ... 2.3 Installation in a 19" rack ... 2.3 Connecting the Instrument to the AC Power Supply ... 2.4 Switching on the R&S FSP ... 2.4 Functional Test ... 2.5 Switching Off the R&S FSP ... 2.5 Connecting Peripheral Devices ... 2.6 Connecting an External Keyboard ... 2.6 Connecting a Mouse ... 2.6 Connecting an External Monitor ... 2.7 Connecting a Printer ... 2.7 Connecting USB Devices (e.g. a Power Meter) ... 2.8 Connecting External Generators ... 2.10 Connecting the R&S FSP to the Generator ... 2.11 Configuring the Generator on the R&S FSP ... 2.12 Activating the Generator Configuration and Setting the Output Level ... 2.13 Using an External Generator as a Tracking Generator ... 2.14 R&S FSP Setup ... 2.15 Selecting the Frequency Reference ... 2.15 Setting the Date and Time ... 2.15 Setting the IEC Bus Interface ... 2.16 IEC Bus Address ... 2.16 IEC Bus Language ... 2.17 ID Response String ... 2.18 Setting the Screen Colours ... 2.18 Automatically Switching Off the Internal Screen ... 2.19 Selecting and Configuring Printers ... 2.20 Selecting Alternative Printer Configurations ... 2.22 Selecting Printer Colours ... 2.22 Installing Plug&Play Printers ... 2.23 Installing Non-Plug&Play Printers ... 2.23 Configuring the LAN Interface (only with Op R&S FSP-B16) ... 2.24 Connecting the Instrument to the Network ... 2.24 Configuring the Network Card ... 2.24 Installation von Treibern ... 2.24 Configuring the Interface ... 2.25 Configuring Existing Network Protocols (TCP/IP Protocol) ... 2.26 Installing Additional Network Protocols and Services ... 2.29 Operating System Properties ... 2.30 Properties Specific to Windows XP ... 2.30 Windows-XP Service Packs ... 2.31 Opening the Windows XP Start Menu ... 2.31 Windows XP Software Approved for the Instrument ... 2.31 3 Firmware-Update and Installation of Firmware Options ... 3.1 Firmware Update ... 3.2 Activating Firmware Options ... 3.3 4 Brief Introduction ... 4.1 Diagram Layout ... 4.2 Displays in the Diagram Area ... 4.3 Setting Parameters ... 4.7 The Keypad ... 4.7 The Rotary Knob and Cursor Keys ... 4.8 Editing Numeric Parameters ... 4.8 Editing Alphanumeric Parameters ... 4.9 Help Line Editor Type 1: ... 4.9 Help Line Editor Type 2: ... 4.10 5 Introduction ... 5.1 Measuring a Sinusoidal Signal ... 5.2 Measuring the Level and Frequency with Markers ... 5.2 Procedure ... 5.2 Increasing the Frequency Resolution ... 5.3 Setting the Reference Level ... 5.4 Measuring the Signal Frequency using the Frequency Counter ... 5.5 Measuring Harmonics of Sinusoidal Signals ... 5.7 Measuring the Suppression of the First and Second Harmonic of an Input Signal ... 5.7 Reducing Noise ... 5.8 Measuring Signal Spectra with Multiple Signals ... 5.11 Separating Signals by Selecting the Resolution Bandwidth ... 5.11 Separating Two Signals with a Level of –30 dBm each at a Frequency Spacing of 30 kHz ... 5.11 Measuring the Modulation Depth of an AM-Modulated Carrier in the Frequency Domain ... 5.15 Measurements in the Time Domain ... 5.16 Measuring the Power Characteristic ... 5.16 Example – Measuring the Power of a GSM Burst During the Activation Phase. ... 5.16 Measuring the Power Characteristic of Burst Signals ... 5.18 Measuring the Signal-to-Noise Ratio of Burst Signals ... 5.20 Example - Signal-to-Noise Ratio of a GSM Signal ... 5.20 Measurement of AM-Modulated Signals ... 5.23 Example 1 – Displaying the AF of an AM-Modulated Signal in the Time Domain ... 5.23 Measurement of FM-Modulated Signals ... 5.25 Example - Display of the AF of an FM-Modulated Carrier ... 5.25 Storing and Loading Instrument Settings ... 5.28 Storing an Instrument Configuration (without Traces) ... 5.28 Storing Traces ... 5.29 Loading an Instrument Configuration ... 5.30 Automatic Loading of a Data Record during Booting ... 5.31 Printing Out the Measurement Results ... 5.32 Selecting the Colour Setting for the Printout ... 5.32 Additional Measurement Examples ... 5.33 6R&S FSP Brief Introduction to Remote Control ... 6.1 Basic Steps in IEC Bus Programming ... 6.2 Linking the IEC Bus Library for Visual Basic ... 6.2 Initialization and Default State ... 6.3 Creating Global Variables ... 6.3 Initializing the Controller ... 6.3 Initializing the Instrument ... 6.3 Switching the Screen Display On and Off ... 6.4 Configuring the Power Save Function for the Display ... 6.4 Sending Simple Instrument Setting Commands ... 6.5 Switching to Manual Operation ... 6.5 Reading Out Instrument Settings ... 6.6 Marker Positioning and Readout ... 6.6 Command Synchronization ... 6.7 Reading Output Buffers ... 6.7 Reading Error Messages ... 6.8 Detailed Programming Examples ... 6.9 Default Setting of the R&S FSP ... 6.9 Setting the IEC Bus Status Registers ... 6.9 Making Default Settings for Measurements ... 6.10 Using Markers and Delta Markers ... 6.11 Marker Search Functions, Restricting the Search Range ... 6.11 Frequency Counting ... 6.13 Working with a Fixed Reference Point (Reference Fixed) ... 6.14 Measuring Noise and Phase Noise ... 6.15 Reading Out Trace Data ... 6.16 Storing and Loading Instrument Settings ... 6.18 Storing Instrument Settings ... 6.18 Loading Instrument Settings ... 6.19 Setting the Data Record for Startup Recall ... 6.19 Configuring and Starting a Printout ... 6.20 Appendix Appendix A: Printer Interface ... A.1 Installing Non-Plug&Play Printers ... A.1 Local Printer ... A.1 Network Printer ... A.6 Appendix B: LAN-Interface ... B.1 Installing Non-Plug&Play Printers ... B.1 Configuration Examples ... B.4 Subsequent Changes to the Network Configuration (computer name, domain, workgroup, etc) ... B.5 Operating the Instrument without a Network ... B.7 Operating the Instrument on the Network ... B.7 Creating Users ... B.7 Changing the User Password ... B.9 NOVELL Network only: Configure NOVELL Client ... B.11 Logging on to the Network ... B.12 Deactivating the Automatic Login Mechanism ... B.12 Reactivating the Automatic Login Mechanism ... B.12 Using Network Drives ... B.12 Printing on a Network Printer ... B.15 Sharing Directories (only with Microsoft Networks) ... B.19 Remote Monitoring of the R&S FSP with XP Remote Desktop ... B.22 Introduction ... B.22 Configuring the R&S FSP for Use of Remote Desktop ... B.22 Configuring the Controller ... B.25 Connection Setup with the R&S FSP ... B.28 Interrupting and Restoring the Remote Desktop Connection with the R&S FSP ... B.31 Deactivating the R&S FSP from the Controller ... B.31 RSIB Protocol ... B.31 Appendix C: External Generator Control ... C.1 List of Generator Types Supported by the R&S FSP ... C.1

show more