Radiosystem RS 9694 Communications Service Monitor
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Radiosystem RS 9694 you can upload the files here .
Model:
RS 9694
Date:
1986
Category:
Group:
Description:
Measuring Coupler
Information
The main purpose of the measuring coupler is to provide the
reflection alarm unit with rectified signal of the output
power to the Antenna and reflected power. Two coupled
signals are also made available for testing with, for
example, a spectrum analyser.
The input is to connector J2, the output from connector J1.
The samples are obtained via four directional couplers. The
rectified signal are available at two levels via connector
J5. The other samples are available from separate
connectors, J3 and J4.
Typical value:
Middle frequency 465 MHz
Forward Po = 30 W Uo = 0,427V
Backward Pr = 3.0 W Uo = 0,477V
Refl. fact. 20
J3 and J4 -40dB
Manual type:
Service Manual
Pages:
10
Size:
4.32 Mbytes (4527177 Bytes)
Language:
english
Revision:
Manual ID:
Date:
1986 01 01
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2016 10 04
MD5:
2d6e238f4b9b3f69f8f2b24f94688169
Downloads:
660
Information
Content ... 1
Description ... 2
Circuit Diagram RS9694 ... RS969402
Outline Drawing RS9694 ... RS969004
Component Location RS9694 ... RS9Ô9003
Component Location PC9694 ... '..RS969413
Component Location PC9691A ... RS969103
Component Location PC9691B ... RS9691 13
Component Location PC9694A ... RS969414
Component Location PC9694B ... RS969415
Parts List Meas. Coupler ... RS9694
Parts List Meas. Coupler Card ... PC9691A
Parts List Meas. Coupler Card ... PC9691B
Parts List Meas. Coupler Card ... PC9694A
Parts List Meas. Coupler Card ... PC9694B