Amplifier Research 5S1G4 Amplifier
Manufacturer:
Model:
5S1G4
Date:
Category:
Group:
Description:
Broadband Amplifier

Information

The Model 5S1G4 is a solid state, self-contained, air-cooled, broadband Amplifier designed for applications where instantaneous bandwidth and high gain are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting. The 5S1G4 when used with a sweep Generator, will provide a minimum of 5 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 5S1G4 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF Amplifier first stage when the RF input level is increased above 0 dBm. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a fault lamp on the rear panel to indicate an over temperature or Power supply fault condition. The unit can be returned to operate when the condition has been cleared.

show more

Service and User Manual
Manual type:
Service and User Manual
Pages:
136
Size:
2.46 Mbytes (2576829 Bytes)
Language:
english
Revision:
Manual ID:
1007385-501_
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2016 09 10
MD5:
d3e01f33a8146b233787dcab10aa42ca
Downloads:
474

Information

TABLE O F C O N T E N T S ... i 1. 1.1 1.2 1.3 G E N E R A L IN F O R M A T IO N ... ... 1 G eneral Description ... ... 1 Power S upplies ... 1 Specifications ... 1 2. 2.1 2.2 O P E R A T IN G IN S T R U C T IO N S ... 5 G eneral ... ... 5 Amplifier Operation ... ... 6 3. 3.1 3.2 3.2.1 3.2.2 3.2.3 3.2.4 3.2.5 3.3 3.3.1 T H E O R Y O F O P E R A T IO N ... 7 Introduction ... 7 RF Am plifier Operation ... 7 A l Variable Gain Amp (Schematic No. 1012338 Part o f Schematic 1012408) ... 7 A3 Linearizer Control Circuit (Schematic 1012335 Part o f Schematic 1012408) 7 A4 One (1) Watt Amplifier (Schematic 1010591 Part o f Schematic 1012011) ... 8 A5 Bias Control (Schematic 1011214 Part o f Schematic 1012011) ... 8 Quadrature-Coupled Amplifiers (“Quad Am ps”) (Schematic No. 1011064) ... 8 Power supply (Schematic 1007413) ... 9 A7 Regulator/Fault Board (Schematic 1007397) ... 9 4. 4.1 4.2 4.3 4.4 4.5 4.6 4.7 M A IN T E N A N C E ... 11 General Maintenance Inform ation ... 11 Disassembly Procedure ... 11 Troubleshooting ... 12 Green Power Indicator LED Doesn't Light ... . 12 Thermal Fault ... ... 13 Voltage F a u lt ... 13 Low or No RF power output ... 13

show more