Equipment information:

Advantest Corporation R37B3B Network Analyzer
Manufacturer:
Advantest Corporation
Model: R37B3B
Date: 1994
Category: Measurement instruments
Group: Network Analyzer
Description:
Information:
                                    R3753 series is the 500MHz vector network analyzer, which
has newly been designed based on a
concept ” an optimum tool for each application” .
We have fuily pursued high throughput such as 0.1 ms/points
high-speed measurement at a
resolution bandwidth (RBW) of 10kHz, 115dB wide
dynamic-range measurement, and two-device
simultaneous measurement with two-channel/four-trace
display. Also , we have added the
program sweeping function that can freely change the
resolution bandwidth (RBW), output level,
and input attenuator during sweep operation for each segment.
Since the analyzer employs semiconductor switches for
changing the output level and for
switching the input attenuator, it allows the optimum
high-speed level sweeping for the drive level
test of the oscillator.
With the built-in BASIC controller, a high-speed ATE system
can be easily configured with no
external controller for processes from adjustment to inspection.
Features
(1)
High throughput
• O.Tms/point high-speed frequency sweeping and 5ms short
blanking time
When two-channe! /four-trace (amplitude/phase) and RBW 10kHz
• 0.1 ms/point high-speed level sweeping
High speed and long life using semiconductor switches
(2)
Wide dynamic range
• With automatic switching of input attenuator, H5dB wide
dynamic range
High speed and long life using semiconductor switches for
switching input attenuator
(3)
Program sweeping function
• For each segment, allows setting of frequency, output
level, input attenuator, RBW, and
settling time.
(4)
MS-DOS format disk
• By using an MS-DOS personal computer, it is possible to
easily create programs and
analyze data because of the disk complied with MS-DOS format
standard.
• Three modes of storage capacity available (DD 720KB, HD
1.2MB, and HD 1.44MB)

These manuals are available for the above equipment:

Advantest Corporation -- R37B3B -- User Manual
File name: Advantest-7989-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 330
Size: 8.82 Mbytes (9246882 Bytes)
Language: english
Revision:
Manual-ID/Number: OEDOO 9607
Date: 16 February 1994
Quality: Scanned document, all readable.
Upload date:
MD5: 2cd75e6e6088c860291fe9a7ca1cb3c3
ed2kID: 8abdfac9bfdd8e16f88d6c9201587ab2
Downloads: 18 since 17 August 2016
Information:
1 . B EFO R E M E A S U R E M E N T STA R T
..................................
1.1 About R3753 ......................
.................................................... . . . .
. . .
1.1.1 Product Outline
........................................................
...........................
1.1.2 O perations...........................
................................... ..
1.1.3 Data Flowchart ..................................
.......... ............... ..
1.2 Installation .............
.........................................
1.3 Power Cable .........................
..................................... ...................... ..
1.3.1 The power requirement
........................................................
1.3.2 Exchange of power fuse ............................. ..
1.3.3 Connection of power cable .........
........................................................
1.4 FET Probe ..........................................
.......................... ...........................
1.5 Caution of System-up
...............................................................................
1.5.1 Notes on use of Parallel I/O Port
.........................................................
1.5.2 Notes on use of Serial I/O ports
.........................................................
1.6 Cautions in Adding a Signal Exceeding Available Levels
to the
Input Part .................... ..
..........................................................................
1.7 Cautions in Setting Up an Output Power
..................................................
1.8 Cleaning, Storage, and Transportation
....................................................
1.9 Notes on Use ........... ........................ ..
2. P A N E L DESCRIPTIO N
1-1
1-1
1-1
1-2
1-3
1-4
1-5
1-5
1-5
1-6
1-8
1-9
1-9
1-9
1-9
1-10
1-10
1-11
...................................................................
.. . 2-1
2.1 Front Panel Descriptions
........................................ ..
2.2 Screen Display Descriptions ..................
.................................
2.3 Rear Panel Descriptions
..........................................................................
2-2
2-5
2-7
3. EASY USAGE
.............................................................................
.. 3-1
3.1 Basic Operation
....................................................................
..
3.1.1 Necessary Key for Basic Operation
............................................. ..
3.1.2 Example of Basic Key Operation
...................................... ..
3.2 Measurement Example
...............................................................
3.2.1 Measurement of Filter
........................................................................
3.2.2 Phase Measurement
..........................................................................
3.2.3 Measurement of Group Delay
.............................................................
3.2.4 Sweep Measurement of Narrow-band and Wide-band
....................
3.2.5 Measurement of Amplitude and Phase
.............................................
3.2.6 Measurement of Amplitude and Group D e la y
....................................
3.2.7 Measurement of Linear Amplitude and Phase
..................................
3.2.8 Measurement for Dual-screen to be Displayed
Simultaneously . . . .
3.2.9 Measurement of Reflection
.................................................... ..
3.2.10 Measurement of Crystal Resonator
..................................
3.2.11 Measurement with M ulti-m
arker.................................... ...................
3.2.12 Measurement with Delta Marker
...........................................
3.2.13 Delta Section Marker Analysis
............................................... ..
3.2.14 Measurement by Marker of -»
............................. ........................ ..
3.2.15 Measurement with Coupling of Marker Interpolation
Marker . . . . .
3.2.16 Measurement in which Use of Program Sweep .
................ ..
3.2.17 Measurement of Resonance Point and Antiresonance Point of
Ceramic Oscillation Element (f = 42.0MHz)
.......................................
3.2.18 Output of Measured Data to Plotter ................ ..
3.2.19 Storage/Reproduction of Measured Data
(Saving and Recall Register) . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
3.2.20 Storage and Reproduction of Measured Data
..................................
4. O PERATIO N M ETH O D
3-31
3-34
3-38
3-49
3-55
3-59
3-63
3-69
3-72
3-75
3-81
3-87
3-91
3-94
.................................... .................
................. 4-1
4.1 ACTIVE CHANNEL Block ...............................
........................................
4.2 ENTRY Block .................................
.........................................................
4.3 STIMULUS Block ...............................
...............................
4.3.1 Setting Signal Source
.......................................................
.................
4.3.2 Interlocking between Channels ...........
...................... ........................
4.4 RESPONSE Block .........................................
4.4.1 Setting Input and Parameter Conversion
...........................................
4.4.2 Display Data F o rm a t....................
.......................................................
4.4.3 Setting Display Coordinate Scale ....................
4.4.4 Split-Screen Display and Selection of Display
information ................
4.4.5 TRACE Operation ..................
.............................................. ..
4.4.6 Label in p u t.......................
...................................................... ..
4.4.7 Averaging/Smoothing and Resolution Bandwidth
..................
4.4.8 Selecting Input Attenuator and Input Impedance
.................. .. 4-2
4-3
4-5
4-6
4-8
4-9
4-10
4-13
4-15
4-16
4-18
4-19
4-21
4-24
4.5 Calibration
.................................................................................................
4.5.1 Normalizing
...................................................................................
..
4.5.2 One Port Full Calibration
......................................................................
4.5.3 Calibration Method
....................................................
..........................
4.5.4 Extending Measurement Reference Surface
..................... ...............
4.5.5 Calibration Data Clear
..........................................................
.............
4.6 Marker Function
.............................................................................................
4-40
4.6.1 Setting Marker
........................................
......................................... ....... 4-41
4.6.2 Marker Coupling between Channels ....................
................. ................ 4-43
4.6.3 Interpolation Between
Measurement.............................
......................... 4-44
4.6.4 Displaying Marker Read out V a lu e
...........................................................4-44
4.6.5 Delta-Marker Function
...............................................
..............................4-45
4.6.6 Marker Menu during Impedance Measurement . . . . . . .
. . . . . . . .
4-49
4.6.7 Marker Analysis Function
.............................. ....................
.....................4-51
4.7 Sweep ......... ........................
..........................
............................................... 4-57
4.7.1 Setting Sweep Type ...............................
.................................................. 4-58
4.7.2 Editing Segment of User Frequency Sweep ...........
................................ 4-59
4.7.3 Editing Segment of Program Sweep
....................................................... 4-60
4.8 INSTRUMENT STATE Block
..........................................................
.............. 4-63
4.8.1 System Menu ........................................
.................................................... 4-64
4.9 GPIB B lo c k ................ .. ..................
...............................................................
4-66
4.9.1 Controller Menu ................
..........................
............................................. 4-67
4.9.2 GPIB Menu ...........
.......................................................
........................... 4-68
4.10 Save/Recall ................
.....................................
....................................... ..... 4-69
4.10.1 Selection of Save Type ...........................
............................................... 4-69
4.10.2 Executing Save Register
........................................................................
4-70
4.10.3 Executing Store File
.........................................................................
..... 4-72
4.10.4 Setting Register Name ...........................
............................................... 4-73
4.10.5 Setting File Name . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
4-75
4.10.6 Clearing Saved Register .........
...............................................................
4-76
4.10.7 Purging Stored File ...........................
.......................... ............................4-77
4.10.8 Executing Recall .........................
.......................... .......................... ..... 4-77
4.11 Hard Copy ................................
................................................................
..... 4-80
4.11.1 Setting Plot Scale
.............................................
...................................... 4-81
4.11.2 Setting Plot Data
...............................................................
.................... 4-82
4.11.3 Specifying Pen
....................................................
................... ................ 4-83
4.11.4 Plotter Setup
....................................................
...................................... 4-84
4.12 Communication with Peripheral Devices
....................................................4-87
4.12.1 Parallel I/O Port
...............................................................
....................... 4-87
4.12.2 RS-232 .........
......................................................................
...................4-96
5. P E R F O R M A N C E TEST
.........................................................................
5-1
5.1
5.2
5.3
5.4 5-1
5-3
5-4
5-6
Preparing for Performance T e s t
........................................................ ..
Frequency Accuracy and Range
....................................................
Output Level Accuracy and Flatness
.................................................... .
Output Level Linearity
..............................................................................
6. S P E C IF IC A T IO N S
.................................................
7. E R R O R M ESSAG ES
7.1
7.2
7.3
7.4
7.5
7.6
.................................... ........................ ..
6-1
7-1
Hardware Trouble ...........................................
Overloading an Input Part .........................
Notice of Hardware information
..................................................
Operating Error
.................................................
Warning of Internal Set, Change, etc. .
.........................
Notice of Operating Completion, State, etc.
............................................ 7-1
7-2
7-2
7-3
7-8
7-10
......................................................
.......................... ............... .. . A-1
A.1 Initial Setting ....................
...................................
.......................... ..
A.2 List of Softkey Menu ..................
.................................................
MENU
..............................................................................................
MEAS ................ ................. ...............
..........................................................
FORMAT ....................
................................... ..
......................... ............... .
S C A L E
......................................................................
..
DISPLAY ................ .................
......................
AVG .....................
.........................................................................................
ATT
.............. ..............................
....................................... ........................
CAL ..................
..................................................... ..
MKR
............................................................................
.......................... ..
MKR - »
...............................................................
.......................... ..
SAVE
...............................................................
..........................
RECALL
.....................................................................................................
COPY
...................................................................................................
..
SYSTEM ........................................
..................................................... ..
RUN .........
................................................................
................................. .
LCL
................... .....................................
.......................... ........................... 
A.3 GPIB Command List Corresponding to Panel Key/ Softkey
..................
A.3.1 ACTIVE CHANNEL Block
......................................... ............. ..
..........
A.3.2 STIMULUS Block
......................................................................
..
A.3.3 RESPONSE Block
..............................................................................
A.3.4 INSTRUMENT STATE Block
............................................... ..
A.3.5 GPIB Block
............................................................................
.............
A-15
A-16
A-16
A-21
A-41
A-47
E X T E R N A L VIEW
R3753A EXTERNAL VIEW
..........................................
...................... ..
R3753B EXTERNAL VIEW
............................................................. ...............
R3753E EXTERNAL VIEW
.................................................................
. . . . .
R3753A FRONT VIEW ..................
............................................ ..
R3753B FRONT VIEW ..................
.......................... . . . ____ _____ _____
R3753E FRONT VIEW
...................................................................................
R3753A/B/E REAR VIEW
............................................
.................................
Advantest-7989-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the fifth word of this sentence.
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics