Equipment information:

Advantest Corporation R3765CH Network Analyzer
Manufacturer:
Advantest Corporation
Model: R3765CH
Date: 1997
Category: Measurement instruments
Group: Network Analyzer
Description: Network Analyzer
Information:
                                    R3765/3767H series is the 3.8GHz/8GHz vector network
analyzer, which has newly been designed
based on a concept “an optimum tool for each application”.
We have fully pursued high throughput such as 0.15ms/points
high-speed measurement at a res­
olution bandwidth (RBW) of 10kHz, 100dB wide dynamic-range
measurement, and two-device si­
multaneous measurement with four-channel/eight-trace display.
Also, we have added the program sweeping function that can
freely change the resolution band­
width (RBW) and output level during sweep operation for each
segment
With the built-in BASIC controller, a high-speed ATE system
can be easily configured with no ex­
ternal controller for processes from adjustment to inspection.
<Features>
(1)
High throughput
In the case of С type, 4 S parameters can be displayed in a
screen by 0.15ms/point
high-speed frequency sweeping and four-channel/eight-trace
(RBW 10kHz).
0.15ms/point high-speed level sweeping.
(2)
Wide dynamic range
100dB wide dynamic range.
Program sweeping function.
For each segment, allows setting of frequency, output level,
RBW and settling time.
MS-DOS formatted disk
By using an MS-DOS personal computer, it is possible to
easily create programs and
analyze data because of the disk conformed to MS-DOS format
standard.
Three modes of storage capacity available (DD 720KB, HD
1,2MB, HD 1.4MB).

These manuals are available for the above equipment:

Advantest Corporation -- R3765CH -- User Manual
File name: Advantest-7976-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 324
Size: 10.95 Mbytes (11478168 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date: 20 January 1997
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: c22c4ad7aaf2dfeb3d082964e2cb5aac
ed2kID: 74024c34b8a26c0d54c191879a918d9b
Downloads: 3 since 08 August 2016
Information:
1
G E T T IN G S T A R T E D
............................................................................
1-1
1.1 Product Description......................
.............................................................
1.2 Environmental Conditions .............................
.............................................
1.3 Supply Description ...........................
........... ............ ................ .......... .
1.3.1 Power Supply
Specifications................................ ........
......................
1.3.2 Replacing the Power Fuse....................
...............................................
1.3.3 Connecting the Power Cable................ ........
............................... .......
1.4 FET P robe....................... .............
.............. ...............................................
1.5 System Setup Cautions
..........................................................
...................
1.5.1 Notes on the use of Parallel I/O Ports....
............................. ...............
1.5.2 Notes on the use of Serial I/O ports..... .........
.....................................
1.6 Measurement Time .... ............. .............
........................ .......... ............ .
1.7 Input Signal Level Overload Cautions ..................
.....................................
1.8 How to Replace the Protective Fuse for Bias Input
.................................
1.9 Cleaning, Storage and Transportation ......
...............................................
1.10 Notes on Use
..............................................
............................................... 1-1

P A N E L D E S C R IP T IO N ...... .
............. ...........................................
2.1 Front Panel Descriptions.... ......... ...............
........... ................. ................
2.1.1 R3765AH/3767AH................... ..........
..................................................
2.1.2 R3765BH/3767BH ............
...........................
.........................................
2.1.3 R3765CH/3767CH....................... ............
...................... .....................
2.2 Rear Panel Descriptions ....... ....................
...............................................
2.2.1 R3765AH/3767AH....... .......... ..........
...................................................
2.2.2 R3765BH/3767BH .................................
...............................................
2.2.3 R3765CH/3767CH.................................
.......................... ........ ..........
2.3 Screen Display D escriptions........ ...............
.................................. .......

B A S IC O P E R A T IN G G U ID E L IN E S ....
................. ........... ............... 3-1
3.1 Initial Power-on
...........................................................................................
3.2 Operation Keys
..........................................................
...................
3.2.1 Panel Keys and Soft K e ys........ ..............
............................................
3.3 How to Read the Display Screen ...... ........
............... .............................. .
3.4 Basic Measuring
Procedure.....................................
.................................
3.5 Measurement Samples of Simple Transmission
Characteristics............
3.5.1 Setup and Setting...............
........................... ................................ .
3.5.2 Calibration (Normalize).......
.............................. ............
......................
3.5.3 Magnitude measurement........................
.............................................
3.5.4 Phase
measurement.............................................................................
3.5.5 Group delay measurement............
.......................... .........................
3.6 Measurement Samples of Simple Reflection Characteristics
.................
3.6.1
3.6.2
3.6.3
Setup.....................................................................................................
Calibration (1-port full calibration)...........
............ ............... .................
Measurement by various formats...... ....................
........................ . 3-17
3-20
3-22
B A S IC S O P E R A T IO N .............................
............................................. 4-1
4.1 Basic Keys O perations...... .........................
......................... ............ .
4.2 Basic Key Operation Examples ..........................
............ ..........................
4.3 Soft Key Menu Configuration .... ................
.......... .....................................
4.4 Initial Setup ..... ........ ......... .........
................ ...........................................
4.4.1 How to Initialize.........................
............ ............. .............. ...................
4.4.2 Initial Setup Value..... ........... ..........
.......... .......... ............. ...................
4.5 Setting Backup Memory (Factory Default Settings)
............ .................. 4-1
M E A S U R E M E N T M E T H O D E X A M P L E
...........................................
5.1 Measurement of Transmission Characteristic (2 Trace
Display) ............
5-1

5.1.1 Overlap Display Mode (Two Traces per Screen
Measurement).......
5-1
5-5
5.1.2 Split Display........................................
..................................................
5.2 Transmission Reflection Characteristic Measurement (Four
Screen Display
Mode) ....... ............... .................
............................................................. .
5-8
5.2.1 Setup...................... .....................
................................. ........................
5-8
5.2.2 Calibration (two port full calibration).....
............ ........................ .........
5-9
5.2.3 Four Screen Display...............
.................... .......... .......... ....................
5-15
5.3 Narrow Band/Wide Band Sweep Measurement .....
....................... ........
5-19
5.4 Multi-marker List D isplay............................
............ .............. ....................
5-21
5.5 Ripple Measurement in the Bandwidth
.....................................................
5-23
5.6 Measurement of Electrical Length
........................ ........ .............. ............
5-26
5.7 High-speed Measurement Using the Program Sweep Function
.............
5-29
5.8 GO/NG Measurement Using Limit Line Function
............................ .........
5-33
6
R E C O R D and O U T P U T ...................
................... ................................ 6-1
6.1 Output of Measured Data to the Plotter .... .........
......................................
6.2 Using the Save/Recall Register
................................................................
6.3 Saving to the Floppy Disk
....................................... .............
.....................
6.3.1 About the Measurement Data to Save.....
................. ........... ............. 6-1
7 F U N C T IO N D E S C R IP T IO N S ..........
........................... ....................... 7-1
7.1 ACTIVE CHANNEL Block ....... ..............
................. .............. ...................
7.2 ENTRY Block ..................................
............................................................
7.3 STIMULUS Block ..........................
.................................................. .......
7.3.1 Setting Signal Source.................... .........
...........................................
7.3.2 Interlocking between Channels..... ............
................... .....................
7.4 RESPONSE Block
......................................................................................
7.4.1 Setting input and Parameter Conversion...,......
................................. .....7-10
7.4.2 Display Data
Format.............................................................................
.....7-12
7.4.3 Setting Display Coordinate S
cale........................................................
.....7-13
7 . 4 .4
Four Screen Display and Display Selection
Information.........................7-14
7.4.5 Display
Layout.........................................
............................... ............. .....7-15
7.4.6 Trace Data Selection..................................
.......................................... .... 7-20
7.4.7 TRACE Operation...................... ..........
............ ................................. .......7-21
7.4.8 Labe!
Input.................................................
................................................ 7-22
7.4.9 Colors Settings.............
............................... .............
........................... .... 7-23
7.4.10 Averaging/Smoothing and Resolution Bandwidth........
.......................... 7-25
7.5 Calibration ....................................
...............................................................
.... 7-27
7.5.1 Normalizing..... ..............................
....................................... ................
.....7-27
7.5.2 Normalize & Isolation
Calibration...............................
..............................7-28
7.5.3 1-Port Full Calibration.............................
............................................. .....7-28
7.5.4 2-Port Full Calibration........................
............... .................................. .....7-29
7.5.5 Calibration Method..........................
............ ........................................ .....7-31
7.5.6 Interpolating Calibration Data ..........
.................................................... .....7-37
7.5.7 Calibration Kit
Selection.........................................
................. ............ .....7-38
7.5.8 Parameters Entry of an User-selected Calibration K
it....................... .....7-39
7.5.9 Extending Measurement Reference Plane....
......................................... 7-41
7.5.10 Calibration Data Clear........ ..................
............................................... .... 7-43
7.6 Marker Function ........
..................................... .........
................................. .... 7-44
7.6.1 Setting Marker.......................
..................................
............................. .... 7-45
7.6.2 Marker Coupling between Channels....
.............................................. .... 7-46
7.6.3 Interpolation between Measurement Points.....
.................................. .... 7-48
7.6.4 Displaying Marker Read out V a lu e ......
............................................ ........7-48
7.6.5 Delta-Marker Function .........................
................................................. .... 7-49
7.6.6 Marker Menu during Impedance Measurement........
............................. 7-52
7.6.7 Marker Analysis Function.......... ...........
............................................... .... 7-53
7.7 Time Domain Function (Option 70)
.................................................................7-64
7.7.1 Time Domain Transformation Function.......
..................................... .......7-64
7.7.2 Window Processing....................
....................................... .................
.....7-65
7.7.3 Gate
Function..........................................
............................................. .....7-66
7.8 CDMA IF Filter Analysis Function ................
...................... .......................... 7-67
7.9 Sweep
..............................................................................................................
7-70
7.9.1 Setting Sweep
Type.................................................
............................ .... 7-70
7.9.2 Editing Segment of User Frequency Sweep.....
................................. .... 7-71
7.9.3 Editing Segment of Program Sweep.......
.................................................7-72
7.10 INSTRUMENT STATE Block ...............................
................................ ..........7-74
7.10.1 System Menu...............................
...................................... .................
.... 7-75
7.11 Limit
Function.............................................................
......... ........................... 7-77
7.11.1 Limit M
enu............................................................................................
.... 7-77
7.12 GPIB B lo c k
..................................................
............ .................................. .... 7-83
7.12.1 Controller M
enu.......................................................................
............ .... 7-84
7.12.2 GPIB M
enu.....................................................
.......................................
7.13
Save/Recall.................................................
.................................... ..........
7.13.1 Selection of Save Type..............................
............................... ..........
7.13.2 Executing Save
Register...........................................
...........................
7.13.3 Executing Store
File..............................................................................
7.13.4 Setting Register Name,.......... ..............
................................... ...........
7.13.5 Setting File N am e..................
...............................................................
7.13.6 Clearing Saved Register...... ...................
........................................
7.13.7 Purging Stored F ile ........ ............ .........
.................... ...........................
7.13.8 Executing Recall.....................
..............................................................
7.14 Hard C o p y .........................................
.........................................................
7.14.1 Setting Plot Scale...................
............................. .................................
7.14.2 Selecting Plot D a ta .....................
............ ......................... ....................
7.14.3 Specifying Pen..... .................. ..............
................................................
7.14.4 Plotter Setup...................
....................... ......... .........................
...........
7.14.5 Printer
Setup..........................................................................................
7.15 Communication with Peripheral Devices ......
........................... ...............
7.15.1 Parallel I/O Port............................
........................................................
7.15.2 RS-232 Interface........................
..........................................................
8
7-85
7-86
7-86
7-87
7-89
7-90
7-91
7-92
7-93
7-93
7-96
7-97
7-98
7-99
7-100
7-102
7-104
7-104
7-113
IN A B N O R M A L IT IE S
.................................................
............................ 8-1
8.1 Inspection and Simple Troubleshooting........ ..........
................................
8.2 Error M essages............................
.............. ...............................................
8.2.1 Hardware
Trouble.........................................
........................ ..............
8.2.2 Notice of Hardware Information.......
...................................................
8.2.3 Operating
Error.....................................................................
...............
8.2.4 Warning of Internal Set, Change,
etc.................... ..............................
8.2.5 Completed Operation Conditions Messages
....................................... 8-1
8-2
8-2
8-3
8-4
8-9
8-12
9
T H E P R IN C IP L E ...............................
...................................... ............... 9-1
9.1 The Principle
..............................................
....................................... .......
9.2 Data F lo w .................
................................................... ........
......................
9.3 Block D iagram
.................................................
..........................................
9.3.1 R3765AH/3767AH Diagrammatic Sketch of B
lock..................
9.3.2 R3765BH/3767BH Diagrammatic Sketch of B lock....
........................
9.3.3 R3765CH/3767CH Diagrammatic Sketch of
Block............................. 9-1
9-2
9-3
9-3
9-4
9-5
10 P E R F O R M A N C E T E S T ...... ...................
........... ................................. 10-1
10.1 Preparing for a Performance T e s t......... ..........
........... .............................
10.1.1 Warm u p
............................................................
....................................
10.1.2 Preparing Measurement Instrument.......
............................................
10.1.3 General Note...................................
........................ .............................
10.2 Frequency Accuracy and Range ...................
............................................
10.3 Output Level Accuracy and Flatness
........................................................
10.3.1
Setup.....................................................................................................
10.3.2 Output Level Accuracy......
..................................................................
10.3.3 Flatness....
..............................................................
.......... ..................
10.4 Output Level Linearity................................
............. ............................... .
10.5 Directivity ............
.......................................
................................................
10.6 Load Match of Test P o rt.....
.......................................................................
10.6.1 When H3765AH/3767AH.......... .............
............................................
10.6.2 When R3765BH/3767BH........... ...........
........................... .................
10.6.3 When R3765CH/3767CH............ ...........
.............................................
10.7 Noise Level ................... ...............
......... ...................... ............................
10.8 Crosstalk ............................ .........
................... ...........................................
10.8.1 When R3765AH/3767AH .......................
.............................................
10.8.2 When R3765BH/3767BH............................
................ ........................
10.8.3 When R3765CH/3767CH.... .....................
............ ..........................
11
S P E C IF IC A T IO N S .......... ...................
...................................................
10-4
10-4
10-4
10-5
10-5
10-7
10-8
10-8
10-10
10-11
10-13
10-14
10-14
10-16
10-17
11-1
A P P E N D IX ........ ................. .........
............ ..............
..................................... . A-1
A.1 The Relation of Data between each Function.... .........
.......... .............. .
A.1.1 The Relation of Data between each Channel and each
Function......
A.1.2 The Data Interlocking to each Item in MEAS
Menu...........................
A.2 Measuring Time ....................................
...................................................
A.3 Initial Setting ...........................
..................
...............................................
A.4 Soft Key Menu L is
t.........................................
...........................................
A.5 Other Information ........................
.................. ...........................................
A.5.1 Error Message ................
............................... ..............
........................
A.5.2 Setting of Backup Memory (at the
factory-shipped)......... ................
A.5.3 GPIB Command List for Panel Key/Soft
Key......................... ............ A-1
A-1
A-2
A-3
A-4
A-9
A-22
A-22
A-22
A-22
D IM E N S IO N A L O U T L IN E D R A W IN G
.................................. .................. EXT-1
A L P H A B E T IC A L IN D E X .......................
........... ..................
............................... 1-1
Advantest-7976-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
Enter the fifth word of this sentence.
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics