Equipment information:

Advantest Corporation D3186 Generator
Manufacturer:
Advantest Corporation
Model: D3186
Date: 1994
Category: Measurement instruments
Group: Generator
Description: Pulse Pattern Generator
Information:
                                    D3186 is a high-performance pulse pattem generator to
generate 7 types of pseudo-random (PRBS)
patterns from 2 M to 2&-1, programmable (WORD) patterns up
to 8M (2^3) bits, or frame patterns of
SDH or SONET structure at very high speed from 150 Mb/s to
12 Gb/s.
Moreover, a system, which is used to evaluate the bit error
rate of super-high speed optical
communication devices and compound semiconductors, can be
structured by combining D3186 with
the D3286 error detector.
The advantages of the D3186 include:
[Features]
Ф A high-precision synthesized clock generator is built in.
0 16 types of frequency memories are provided for speedy
frequency setting.
Ф For PRBS patterns, mark ratio can be changed between 8 values.
@ For FRAME pattern, the type of payload can be selected
from WORD, PRBS and CID.
(S> ALTERNATE mode is available which changes over 2
patterns (WORD and FRAME) to
execute measurement.
О
Various types of application are available by using
differential data output (DATA, DATA),
differential clock output (CLOCK1, CLOCK1) and fixed
amplitude clock output (CLOCK2).
Ф
Amplitude, offset and terminator conditions can be
individually set for the differential data
output and the differential clock output each.
The terminator conditions can be selected
from among TO О V, TO -2 V or AC coupling.
®
From the motor drive type delay line, the phase of clock
output can be changed in steps of
1 ps resolution up to ±400 ps.
(1) Error can be added in repetition of 1 x 10-4 to 1 x
10*9, single or external control.
©
When error measurement is performed by using D3186 combined
with D3286 Error
Detector, the master slave function interlocks their patterns.
(ED The GPIB (IEEE 488) feature enables full remote control,
making it easy to construct a
measurement and test system.
The built-in floppy disk drive enables storing/calling the
set conditions and the content of
pattern setting. (MS-DOS® format)

These manuals are available for the above equipment:

Advantest Corporation -- D3186 -- User Manual
File name: Advantest-7975-Manual-Page-1-Picture
Manual Type: User Manual
Pages: 227
Size: 6.37 Mbytes (6675592 Bytes)
Language: english
Revision:
Manual-ID/Number: FOE-8324231F01
Date: 01 January 1999
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: 9cbd3e1cdacc2a8102dbf728d7be66c4
ed2kID: 0b52b13354f84a302222a38477b81bfd
Downloads: 4 since 07 August 2016
Information:
1. O U T L IN E
.
..............................................................................
....................... 1-1
1.1 Outline of Product
......................................................................................
1.2 Before Using
................................................................
...................... ..
1.2.1 Checking the Appearance and Accessories
........................................
1.2.2 Working Environment
.............................................................................
1.2.3 Setup ..............
........................................................................................
1.2.4 Precautions for Connecting the I/O Signal Lines .
.·............................
1.2.5 Storage, Transportation and Cleaning
.................................................
1.3 Replacing Parts with Limited Life
............................................................... 
2. W H E N YO U U S E TH E DEVICE FO R T H E FIR S T TIM E
............ 2-1
2.1 Front P a n e !................................
...................................................................
2.1.1 Frequency Setting Section ........................
............................................
2.1.2 Pattern Setting Section . ........................
.................................................
2.1.3 Output Setting/Connector Section
........................................................
2.1.4 Fiie/GPIB Control Section . ..........
.........................................................
2.2 Rear Panel .............................. .
..................................................................

3. O P E R A T IO N
. ........................................
....................................................
3.1 Power On
...................................................... ..
............................................
3.2 Operation on the Panel
...........................................................
....................
3.2.1 Operation on the Front Panel
........................................... ....................
(1) Frequency Setting Section .............................
......................................
(2) Pattern Setting Section
...........................................................................
(3) Output setting/Connector section
............................................ ..
(4) File/GPIB operation s e c tio n
............................................... ..
(5) Setting the initial state
................................... ..
...................................
3.2.2 Rear Panel Operation Method
...............................................................
4. S Y S T E M O P E R A T IO N M E TH O D
. . ,
4.1 Setting the D3186 .....................................
.. . . ...........................................
4.1.1 Connecting Clock input
..................................................................
4.1.2 Setting Data Output
........................................................
.......................
4.1.3 Setting Clock Output
.............................................................................
4.1.4 Setting the Pattern
..................................................................................
4.2 Setting the D3286
...............................................
.........................................
4.2.1 Setting Data input
...............................................................
..................
4.2.2 Setting Clock input
...................................................................................
4.2.3 Setting the Pattern
..............................................................................
.. .
4.2.4 Setting Data Input P o la rity
...........................................
...........................
4.2.5 Adjusting Clock D e la y
..............................................................................
4.3 Connecting Signal Lines
..............................................................................
5. G RIB
4-8
4-8
4-8
4-9
4-9
4-9
4-10
...................................
............................................
..............................
5-1
5.1 Outline of GPIB
..............................................................................................
5.2 Functional Specification ..........................
......................................................
5.2.1 GPIB Specification .........
........................................................................
5.2.2 Interface Functions
...................................................................................
5.3 Notes on GPIB U s a g e
.................................................................
5.4 Setting Device Address
............................................................. ..................
5.5 Canceling Master/Slave Control Function
..................................................
5.6 Program Message (Listener Format) .
.......................................................
5.6.1 Basic Format
......................................................................
....................
5.6.2 Initialization Program Message
..................................................... ..
5.6.3 Service Request ("SRQ") Program Message .
.................................... 5-12
5.6.4 Command Program Message (Remote Code)
....................... ..
(1) Clock frequency setting .........
...............................................................
(2) Pattern setting .......................
................................................. ..
(3) Output setting . ...................................
...................................................
(4) Filing ....................................
.............
........................................................
(5) Calender/Clock operation
.......................................................................
(6) GPIB and system setting . ........................
.................. .........................
(7) External SG control code s e ttin g
.......................... ................................
5.6.5 Word Pattern and Frame Pattern Settings .
........................................
(1) Setting word pattern ............................
..................................................
(a) Hex mode setting format
.................................................
................
(b) Binary mode setting format:
................................... .........................
(2) Setting frame pattern
..............................................................................
(a) Hex mode setting format
.............................................
....................
(b) Binary mode setting format .........
....................................................
5.7 Query Program Message and Response Message
.................................
5.7.1 What is Query Program Message?
........................ ............ ............. ..
5.7.2 Query Program Message and Response Message Formats
............
(1) Clock frequency setting
..................................................................
(2) Pattern setting
.........................................................................................
......5-38
(3) Output setting
......................................................................................
.
5-45
(4) Calender/clock operation
............................................................................
5-50
(5) GPIB and system setting
.............................................................................5-51
(6) External SG control code setting
........................................ ..................
......5-52
5.8 Status Byte ..............
.......................................................
.............................. ..... 5-53
5.9 Device Clear (SDC and DCL C o m m a n d
s)................................................. ..... 5-54
5.10 initial State
..........................................................................................
............ 5-55
5.10.1 initial State of Operation
....................................................................
..... 5-55
5.10.2 Setup Parameter initialization
..........................................
.................. ..... 5-55
5.11 Program Example
....................................................................
.................. ..... 5-61
5.11.1 Operation Condition Setup
.................................................................
..... 5-61
5.11.2 Operation Condition Read
..................................................................
..... 5-64
5.11.3 Word Pattern Setup (Hex mode)
.............................................. ............ 5-66
5.11.4 Word Pattern Setup (Binary mode) .
................................................. ..... 5-70
6. F IL E F U N C T IO N
........................................
................................................. 6-1
6.1 Outline
...................................................
........................................................
6.2 File Format ..........................
..........................................................................
6.3 File Size ...................
.......................................
.............................................. 6-1
6-2
6-2
7. M E S S A G E D IS P LA Y
...................................................
............................... 7-1
MPU Error Display ............ .........................
................................................
Low Battery Display ........................................
......................... ..................
File Error Display .
.......................................................................................
Displays Relating to Delay Lines
................................................................
8. C O N F IR M A T IO N OF S P E C IF IC A T IO N AN D F U
N C T IO N
.....
8.1 Confirming Specification
............................................... .
..........................
8.1.1 Confirming CLOCK o u tp u
t.......................................................................
8.1.2 Confirming CLOCK2 output
......................................................
.............
8.1.3 Confirming 1/2 CLOCK output . . . . . . . ■ . . . . .
. . . . . . . · . - / ■ . · ■
8.1.4 Confirming 1/32 CLK TRIGGER signal
.................................................
8.1.5 Confirming PATTERN TRIGGER signal
...............................................
8.1.6 Confirming 1/4 RATE output
................................................................
8.1.7 Confirming CLOCK1, CLOCK1 outputs
................................................... 8-11
8.1.8 Confirming DATA, DATA outputs
...............................................................
8-16
8.2 Confirming Function
.....................................................................................
8.2.1 Connections and Basic Setup of D3186 and D3286
......... ................
8.2.2 Confirming the frequency
........................................ ............. ..
8.2.3 Confirming the PRBS Pattern
................................................................
8.2.4 Confirming the Word Pattern
...............................................
..................
9. SPECIFICATIONS
.......................................................
...............................
9.1
9.2
9.3
9.4
9.5
9.6
9.7
Operation Clock
..................................................................
Pattern
............................................................................................
................
Main Input
...........................................................
Auxiliary Output S ig n a ls ......... ..................
...................................................
Control Input Signals
............................................
.......................................
System Functions
...........................................................
..............................
General Specifications
..............................................................
..................
LIST OF ABBREVIATIONS
8-21
8-21
8-22
8-22
8-23
9-1
9-1
9-2
9-6
9-9
9-10
9-11
9-12
...............................................................
A-1
DIMENSIONAL OUTLINE DRAWING
....................................................... EXT-1
ALPHABETICAL INDEX
................................
...................................
1-1
Advantest-7975-Manual-Page-1-Picture
Start Free Download


Comments

No comments yet.

Add Comment

* Required information
(never displayed)
 
Bold Italic Underline Strike Superscript Subscript Quote Line Bullet Link Email Image Video
 
Smile Sad Huh Laugh Mad Tongue Crying Grin Wink Scared Cool Sleep Blush Unsure Shocked
 
1000
What is the opposite word of small?
 
Enter answer:
 
Notify me of new comments via email.
 
Remember my form inputs on this computer.
 
 
Powered by Commentics