Equipment information

EICO Electronic Instrument Co. Inc. 378 Generator
EICO Electronic Instrument Co. Inc.
Model 378
Date 1966
Category: Measurement instruments
Group Generator
Description Audio Generator
                                    Based on a highly reliable circuit, the Model 378 Audio
Generator produces a very low distortion sine wave signal
over a very wide range of frequencies and is ideal for use
in testing audio amplifiers for gain and frequency response,
as a signal source for various bridge measuring circuits,
for modulation of RF signal generators, or any other
application where a stable, accurate audio sine wave must be
Unlike most other audio generators that require
interpretation of a dial setting with possible error, the
frequency-determining elements of the Model 378 are not
continuously variable, but are set by positive-setting
detent switches that selects combinations of 1% resistors
and 2% capacitors that make up the frequency-selecting
network. This method of tuning enables repeatable accurate
setting to any individual cycle between 1 cps and HOkc.
The output level of this instrument can be set with great
accuracy between 0 and 10 volts RMS (or between -70 and
+22db) ön a 4-1/2 inch, 2% full-scale accuracy meter.
Below 1 volt RMS output, the instrument is provided with a
switch-selected internal 600Ω load that can be disconnected
as desired.

These manuals are available for the above equipment:

Manual Type Service and User Manual Eico-7734-Manual-Page-1-Picture
Pages 12
Size 1.85 Mbytes (1940398 Bytes)
Language english
Date 1966
Quality Scanned document, all readable.
Upload date
MD5 d41c507992b096d20bb9ebef4bfabec3
Downloads 85 since 18 February 2016

Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics