Equipment information

Fluke 73 Digital multimeter
Manufacturer
Fluke
Model 73
Date 1997
Category: Measurement instruments
Group Digital multimeter
Description
Information
                                    

These manuals are available for the above equipment:

Manual Type User Manual Fluke-7657-Manual-Page-1-Picture
Pages 12
Size 151.93 Kbytes (155579 Bytes)
Language english
Revision 2
Manual-ID/Number 650454
Date February 1998
Quality Scanned document, all readable.
Upload date
MD5 5bc7b7d22f8aefd3797753ceafe21232
Downloads 109 since 28 January 2016
Information
Instruction Sheet
Fluke-7657-Manual-Page-1-Picture


Manual Type Service Manual Fluke-7660-Manual-Page-1-Picture
Pages 54
Size 5.62 Mbytes (5894653 Bytes)
Language english
Revision 1
Manual-ID/Number 896204
Date September 1992
Quality Scanned document, all readable.
Upload date
MD5 abed095baafe67c1a891b6aec5699f73
Downloads 296 since 28 January 2016
Information
The following descriptions briefly describe each section in
the manual.
SECTION 1. INTRODUCTION AND SPECIFICATIONS
This section describes use of the Service Manual and
application of special terminology (conventions) to describe
the meter’s circuitry. A complete set of specifications
appears at the end of this section.
SECTION 2. THEORY OF OPERATION
This section first categorizes instrument circuitry into
functional blocks, with a description of each block’s role
in overall operation. A detailed circuit description is then
given for each block. These descriptions explore operation
to the component level and fully support troubleshooting and
repair procedures defined in Section 3.
SECTION 3. MAINTENANCE
Provides complete maintenance information, from general
maintenance and cleaning instructions to detailed
troubleshooting and repair procedures to the component
level. Troubleshooting and repair procedures rely heavily on
both the Theory of Operation presented in Section 2 and the
Schematic Diagrams shown in Section 5.
SECTION 4. LIST OF REPLACEABLE PARTS
Includes parts lists for all standard assemblies.
Information on how and where to order parts is also provided.
SECTION 5. SCHEMATIC DIAGRAMS
Includes schematic diagrams for all assemblies.
Fluke-7660-Manual-Page-1-Picture


Manual Type Service Manual Fluke-10106-Manual-Page-1-Picture
Pages 64
Size 5.90 Mbytes (6183208 Bytes)
Language english
Revision 1
Manual-ID/Number 896204
Date 01 September 1992
Quality Scanned document, all readable.
Upload date
MD5 a2c34dab607636efef7e4754d4734524
Downloads 39 since 14 January 2018
Information
ORGANIZATION OF THE SERVICE MANUAL	1-2.

The following descriptions briefly describe each section in
the manual.

SECTION 1. INTRODUCTION AND SPECIFICATIONS

This section describes use of the Service Manual and
application of special terminology (conventions) to describe
the meter’s circuitry. A complete set of specifications
appears at the end of this section.

SECTION 2. THEORY OF OPERATION

This section first categorizes instrument circuitry into
functional blocks, with a description of each block’s role
in overall operation. A detailed circuit description is then
given for each block. These descriptions explore operation
to the component level and fully support troubleshooting and
repair procedures defined in Section 3.

SECTION 3. MAINTENANCE

Provides complete maintenance information, from general
maintenance and cleaning instructions to detailed
troubleshooting and repair procedures to the component
level. Troubleshooting and repair procedures rely heavily on
both the Theory of Operation presented in Section 2 and the
Schematic Diagrams shown in Section 5.

SECTION 4. LIST OF REPLACEABLE PARTS

Includes parts lists for all standard assemblies.
Information on how and where to order parts is also provided.

SECTION 5. SCHEMATIC DIAGRAMS

Includes schematic diagrams for all assemblies.
Fluke-10106-Manual-Page-1-Picture


Manual Type Service Manual Fluke-10107-Manual-Page-1-Picture
Pages 48
Size 2.71 Mbytes (2843035 Bytes)
Language english
Revision 1
Manual-ID/Number 731034
Date 01 May 1989
Quality Scanned document, all readable.
Upload date
MD5 56006f162b2df9b224853f5d77406d68
Downloads 35 since 14 January 2018
Information
his manual presents service information for the Fluke 73,
75, and 77 Multimeters. Included are a theory of operation,
general maintenance procedures, performance tests,
calibration procedures, troubleshooting information, a list
of replaceable parts, and a schematic diagram.



	INTRODUCTION AND SPECIFICATIONS
.............................. 1-1

1-1. INTRODUCTION
.............................................. 1-1

1-2.	SPECIFICATIONS
............................................. 1-1

2	OPERATING INSTRUCTIONS
......................................... 2-1

2-1.	INTRODUCTION
.............................................. 2-1

3	THEORY OF OPERATION
............................................. 3-1

3-1.	INTRODUCTION
.............................................. 3-1

3-2.
OVERVIEW.................................................... 3-1

3-3. DETAILED DESCRIPTION
..................................... 3-1

3-4. Input Signal Conditioning
...................................... 3-1

3-5. Ohms Input Protection
......................................... 3-1

3-6.	Additional Circuitry
........................................... 3-1

4	MAINTENANCE
....................................................... 4-1

4-1.	INTRODUCTION
.............................................. 4-1

4-2. PWB ACCESS AND GENERAL MAINTENANCE................. 4-1

4-3. DISPLAY ACCESS
............................................. 4-2

4-4. CLEANING
.................................................... 4-2

4-5. PERFORMANCE TESTS
....................................... 4-3

4-6. Initial Procedure
.............................................. 4-3

4-7. Display Test
.................................................. 4-3

4-8. AC Voltage Test
.............................................. 4-3

4-9. DC Voltage Test
.............................................. 4-3

4-10. Resistance
Test................................................ 4-3

4-11. Diode Test
................................................... 4-4

4-12. DC mA Test (75 & 77 Only)
.................................... 4-4

4-13. DC Amps Test
................................................ 4-4

4-14. CALIBRATION
................................................ 4-5

4-15. TROUBLESHOOTING
.......................................... 4-5

4-16. Overall System Check
.......................................... 4-5

4-17. VDC Signal Tracing
........................................... 4-5
5	LIST OF REPLACEABLE PARTS
....................................... 5-1

5-1. INTRODUCTION
.............................................. 5-1

5-2.	HOW TO OBTAIN PARTS
...................................... 5-1

6	GENERAL INFORMATION
............................................... 6-1

6-1.	INTRODUCTION
.............................................. 6-1

7	SCHEMATIC DIAGRAMS
.............................................. 7-1

8	MANUAL CHANGE INFORMATION
..................................... 8-1
ii

Fluke-10107-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics